Dental 3D Printing Market

Dental 3D Printing Market by Product(Material (Plastic, Metal), Equipment(3D Scanner & Printer), Service), Technology (Vat Photopolymerization, FDM, SLS, Polyjet), Application(Prosthodontics, Implants), End-User(Labs, Hospitals) - Global Forecast to 2027

Report Code: MD 6394 Mar, 2022, by marketsandmarkets.com

[273 Pages Report] The dental 3D printing market is projected to reach USD 7.9 billion by 2027 from USD 3.2 billion in 2022, at a CAGR of 20.2%. The dental 3D printing medical devices market is principally driven by factors such as the increasing incidence of dental caries and other dental diseases, rising demand for cosmetic dentistry, the growing adoption of dental 3D printers in dental hospitals & clinics, and the increasing growth in the geriatric population. On the other hand, the rising number of large dental practices is expected to limit market growth to a certain extent.

Dental 3D Printing Market

To know about the assumptions considered for the study, Request for Free Sample Report

Impact of Covid-19 on Dental 3D printing Market

To assess the impact of COVID-19 and provide market forecasts, scenario-based approaches are considered.

The dental 3D printing market was initially negatively impacted by the COVID-19 pandemic, as most dental offices, clinics, and laboratories were closed in many parts of the world due to lockdowns and quarantine restrictions in early 2020. This resulted in all non-essential dental procedures being deferred; the volume of outpatient cases reduced considerably in this period. Once lockdown and quarantine measures were lifted in most parts of the world, the patient flow was lower as most individuals hesitated to engage in the close-contact treatment required for dental procedures. However, recovery can be seen in most regions, especially North America and Europe, as dental services regain normalcy. The Asia Pacific dental market has been slower to recover, especially in China and India. However, the drivers that had propelled 3D dental printing previously, such as the rising digitization of dental set-ups and the expansion of dental clinics and corporate chains, are still in place. This can be expected to promote the growth of the market in 2021–2022.
In an optimistic scenario, the need for smoother clinical workflows, faster turnaround times, and fewer dental appointments could boost the market growth. Dentists may be more likely to invest in technologies like CAD/CAM and dental 3D printing to reduce the time taken to deliver dental appliances and treatment, and patients may be more likely to opt for these solutions for the same reason.
In the pessimistic scenario, it could be assumed that the economic impact of the COVID-19 pandemic on the dental industry could affect the adoption of dental 3D printing due to its high capital and operational costs. However, this is unlikely, as market recovery is already seen in most regions at present.
In the realistic scenario, it could be assumed that the long-term effect of the COVID-19 pandemic on the dental 3D printing market is neutral, growing slowly from Q3 2020 and going back to pre-COVID conditions from Q1 2021 onwards.

Dental 3D printing Market Dynamics:

Drivers : High incidence of dental caries and other dental diseases

Dental caries or tooth decay is a common ailment across all age groups, with the global incidence of decayed and missing teeth (DMT) increasing dramatically in recent years. According to the CDC, in 2019, 64.9% of adults aged above 18 years of age had a dental examination or dental cleaning procedure. According to the American College of Prosthodontists, more than 36 million Americans are completely edentulous, and around 120 million Americans are missing at least one tooth. The number of partially edentulous patients is expected to increase to more than 200 million Americans in the next 15 years. Single crowns to replace a missing tooth were the most common restorative procedure; according to the American College of Prosthodontists, ~2.3 million implant-supported crowns are made annually.

In the US, the most common oral diseases are tooth decay and gum diseases. Although less common, cancers of the oral cavity and pharynx alongside other oral health problems can severely affect the general health and quality of life. The first assessment of children’s oral health in LA country, the Smile Survey 2020, was conducted during 2018-2019 on over 100,000 children in 72 schools. The percentage of children with untreated decay was found to be 20%. Similarly, the prevalence of dental caries experience and untreated tooth decay across the US (2013-2016), California (2018-2019), and Los Angeles Country (2020) is 15.5%, 21.9%, and 20.7%, respectively. Likewise, the prevalence of tooth loss across the US, California, and Los Angeles in 2018 of age 45 to 64 years is 41.1%, 38.4%, and 40.2% respectively. Similarly, the population aged between 65 to 74 who lost their natural teeth is 13.6%, 7.7%, and 5.8% respectively. The annual dental visit in California is 49.7 % in children (0-20 years) and 25% in adults (Age-21+). Also, in Los Angeles, the rate of visits is 50.7% in children (0-20 years) and 23.9% in adults (Age-21+). Like dental implants, dental prosthetics, and other dental products manufactured by dental 3D printers find high use in the restoration of the dental structure, the high incidence of target diseases will play a key role in the growth of the dental 3D printing market during the forecast period.

Rising demand for cosmetic dentistry and preventive dental care

With increasing disposable incomes, the willingness to undergo expensive cosmetic procedures has also risen, specifically among the aging population. Globally, there is a growing demand for dental restoration solutions and aesthetic treatments such as whitening and polishing. Moreover, there has been an increase in the demand for preventive dental care alongside the adoption of cosmetic dentistry in both developing and developed countries, primarily due to changing lifestyles and a growing focus on dental aesthetics, which is where dental 3D scanners and printers come into play.

According to a survey by the American Academy of Cosmetic Dentistry (AACD) in 2019, it was found that almost all the respondents had performed crowns, bonding, bridges, whitening, veneers, and dentures. Nonmembers remain less likely than members to do implants (64% to 73%) or recontouring (60% to 74%). However, both specialties increased for non-members by about 10% in 2019 compared to 2017. Besides this, most practices that perform the alignment of teeth use Invisalign (80%), followed by Clear Correct (24%). The non-members (73%) and small town or rural dentists (69%) are less likely to use Invisalign, with both using Clear Correct slightly more than the overall average. Thus, the rising preference for cosmetic dentistry will aid the growth of the dental 3D printing market in the coming years.

Growth in Edentulism in geriatric population

Edentulism (tooth loss) is a major oral health concern among the elderly; according to the WHO, ~30% of individuals aged 65 years and above are edentulous. As the elderly are more susceptible to various health conditions, including several dental ailments, this trend is expected to increase the number of people suffering from oral health problems, including edentulism. Periodontal diseases and dental cavities are also major causes of tooth loss.

Globally, there were 900 million persons aged 65 years or over in 2020. Since women live longer than men, on average, they comprise the majority of older persons, especially at advanced ages. Over the next three decades, the number of older persons worldwide is projected to more than double, reaching over 2 billion in 2050. All regions will see an increase in the size of the older population between 2020 and 2050. Globally, the share of the population aged 65 years or over is expected to increase from 9.3% in 2020 to around 16.0% in 2050.<

By 2060, according to the US Census, the number of US adults aged 65 years or older is expected to reach 98 million, accounting for around 24% of the overall population. Oral health problems in adults comprise untreated tooth decay, gum diseases, tooth loss, oral cancer, and chronic cancer. Approximately all adults (96%) aged 65 years or older have had a cavity; 1 in 5 have untreated tooth decay. About 2 in 3 (68%) adults aged 65 years or older have gum disease. Nearly 1 in 5 adults aged 65 or older have lost all their teeth. Complete tooth loss is twice as prevalent among adults aged 75 and older (26%) compared with adults aged 65-74 (13%).

Furthermore, according to the WHO, the share of the geriatric population in Europe increased from 15.7% in 2000 to 20% in 2020, amounting to 101.1 million people. This is further expected to reach 25.0% by 2030. The geriatric population is also increasing in Asia; in Japan and China, the geriatric population increased from 17.0% and 6.9% of the total population in 2000 to 28.2% and 17.9%, respectively, in 2018. The significant increase in the geriatric population and the associated increase in the prevalence of edentulism is expected to propel the growth of the dental 3D printing market in the coming years.

Rapidity, accuracy, and less labor-intensive processes in dental 3D printing

The greatest advantages of dental 3D printing are the speed and accuracy offered by dental 3D printers. An increased level of automation ensures better overall accuracy and far less time consumed than manual model making. Multiple appliances can be printed simultaneously once the digital copy has been sent. This implies that the technician can begin working as soon as the copy of the scan arrives. It also enables dental technicians to have a clean workspace without needing to deal with plaster or inhale grinding dust. Moreover, the availability of dental 3D printing software indicates that dentists can reduce stored model inventory, with all 3D models being saved in the digital space. These advantages translate to better clinical workflows and an improved treatment experience for patients. For instance, 3D printers can create models for patients prior to surgery, allowing them to visualize the procedure and result, thereby increasing overall patient compliance and acceptance. The incorporation of 3D printing also reduces the number of processes and is overall less invasive, with end products that are functionally and aesthetically more pleasing for patients.

3D printing in dentistry has also evolved as per the requirements and size of the dental practice. Industrial-grade and high-throughput 3D printers have good capacity and quality for dental clinics that need to produce large volumes of appliances daily. Desktop printers, on the other hand, offer great print quality and are smaller and versatile, with lower throughput. Affordability, alongside the increasing adaptability and versatility of 3D printers for different types of practices, has resulted in the rising adoption in dental clinics & hospitals. This has boosted the overall market growth for dental 3D printers.

Restraints : Lack of skilled workforce due to limited specialized training in additive manufacturing

One of the prominent barriers to the adoption of additive manufacturing (AM) or 3D printing is the lack of a skilled workforce. The paradigm shift in design and production processes through AM requires a workforce with technical know-how. A lack of trained & experienced engineers and designers is a major impediment to the adoption and advancement of AM. There is a very limited resource pool available for staff that is well-versed with 3D printing processes, which is further worsened by the rapid pace of evolution of the dental 3D printing market in terms of technology and materials. There is a dearth of training programs available for AM, and a wide gap between academia and practical applications is prevalent in the industry that is difficult to bridge.

The lack of a workforce with a full understanding of the design process and production cycle in AM affects the final quality of the product. The lack of such a workforce would restrain the overall adoption of dental 3D printing.

Opportunities : Increasing popularity of CAD/CAM technology

Computer-aided design (CAD)/computer-aided manufacturing (CAM) is increasingly being embraced by the dental industry due to its high precision in dental restoration. This technology is used for not only designing and manufacturing milled crowns and bridges but also designing fabricated abutments used in dental implants. CAD/CAM is highly useful in customizing dental prosthetics, such as dental crowns made of zirconium. The use of CAD/CAM also reduces the need to wear temporary bridges/crowns during the treatment and the number of doctor visits, thereby reducing the cost of dental restoration.

According to the American Academy of Cosmetic Dentistry, in 2019, about one-third (32%) expect a trend toward more digital or CAD/CAM. Dental 3-D Printing or milling (24%) and scanners (16%) are also expected to provide significant growth opportunities by integrating CAD/CAM technology. Although most prosthetic elements are still made manually, the use of CAD/CAM associated with 3D printing continues to increase due to its advantages.

Advancements in resins used for dental 3D printing

Dental 3D printing materials are resins specifically designed and manufactured to produce final-placement dental appliances and functional dental models. Dental model resins have many applications, such as education, restorative fitment tests, patient consultation, and the fabrication of clear aligners. The variety of applications of dental resins is now being supported by advancements in these materials, which have been classified by the FDA as Class Ia and Class IIa biocompatible. These new resins have physical attributes that deem them ideal for applications in dentistry. For instance, in June 2020, Formlabs (US) launched the Dental LT Clear V2, Custom Tray Resin, and Temporary CB Resin for application in 3D printing. The Custom Tray Resin material allows a dental impression tray to be produced in the dental clinic in less than an hour, improving clinical workflow and reducing turnaround time. Temporary CB Resin can be used for direct printing temporary dental crowns and other dental appliances that could last up to a year in patients.

These ongoing advancements in resins expand the versatility of application in dental 3D printing and indicate an opportunity in this market.

Challenges : High capital investment and operating costs

Small and medium-sized laboratories may find it unfeasible to install dental 3D printing facilities due to financial constraints. Since most dental labs are small or medium-sized, this is a key challenge in the market. The cost of a high-resolution 3D printer is around USD 40,000 to USD 100,000. This also makes it difficult for laboratories dependent on federal funding (for whom securing funds is a time-consuming process) to install and use such equipment. Due to this financial aspect, many smaller dental clinics may choose to outsource production to service bureaus or laboratories. However, the speed offered by 3D printing reduces considerably in this case as lead time increases, with parts taking days or weeks to be completed.

Moreover, 3D printing is a new technology in the medical field, and health insurance companies usually do not cover costs related to 3D printing surgeries. 3D printing software used during surgeries is very expensive and requires significant collaboration between the radiology and surgical departments for effective functioning. In addition, 3D printing materials cost more than traditionally used materials—the polymer used for dental 3D printing is costlier than polymers used in injection molding. As a result, the overall disadvantages and costs outweigh the general usefulness of 3D printing for small and medium-sized end users, whereas bigger and hospital-based laboratories, due to mass production, can bear prices and fully benefit from 3D printers.

Rising number of large dental practices

The number of large dental practices is growing in developed markets across North America and Europe. As per the American Dental Association, as of 2019, there are 200,419 dentists practicing in the US. Over the years, the trend has been shifting towards large corporate practice set-ups instead of traditional solo practices. The reasons for this increasing consolidation include a better work-life balance in large practices, the rising costs of investing in a solo dental practice, and an increased concentration of commercial dental insurance. According to the International Journal of Health Economics and Management, the average reported practice size increased, and the percentage of dentists in solo practices declined from 64% to 52% between 2000 and 2015. In 2017, only one in five dentists below 35 years of age in the US was working in a solo practice. Both expansion and consolidation have played a significant part in this increase; a rising number of small and medium-sized dental practices have been acquired by larger practices over the years.

“Services segment accounted for the largest share in the dental 3D printing market.”

Based on the product & service segment, the dental 3D printing market is segmented into equipment, materials, and services. The services segment accounted for 65.5% of the dental 3D printing market in 2021. The large share of this segment can be attributed to the competitive pricing offered by dental 3D printing service providers and the large-scale outsourcing of dental product design & production by small hospitals, dental clinics, and laboratories.

“VAT photopolymerization segment accounted for the largest share in the dental 3D printing market.”

Based on the technology segment, the dental 3D printing material and equipment market is segmented into vat photopolymerization, selective laser sintering, PolyJet printing, fused deposition modeling, and other technologies. The vat photopolymerization segment accounted for 53.0% of the dental 3D printing market in 2021. Its large share can be attributed to its wide applications in the manufacturing of dental implants, dentures, CMF (craniomaxillofacial) guides, prosthetics and implants, porous scaffolds, and dental restorations.

“The prosthodontics segment accounted for the largest share in the dental 3D printing market in 2021”

Based on the application segment, the market is divided into prosthodontics, orthodontics, and implantology. The prosthodontics segment accounted for 55.0% of the dental 3D printing market in 2021. The large share of this segment can be attributed to the growing demand for crowns and bridges, the rising prevalence of dental caries, the increasing incidence of tooth loss, and the increasing customer acceptance of advanced dental technologies. The implantology segment is expected to grow at the highest CAGR of 21.5% during the forecast period. The growing preference for manufacturing dental implants using dental 3D printing, the advantages offered by 3D-printed dental implants, increasing advances in materials used for 3D printing implants, and the increasing application of 3D printing in dental implantology drive market growth in this segment.

“The dental laboratories segment accounted for the largest share of dental 3D printing market in 2021”

Based on the end user segment, the market is segmented into dental laboratories, dental hospitals & clinics, and dental academic & research institutes. In 2021, the dental laboratories segment accounted for 78.6% of the dental 3D printing market. The large share of this segment can be attributed to the increasing number of dental laboratories, expansion of dental laboratories in developing countries, rapid adoption of advanced technologies by small and large laboratories across the globe, the outsourcing of certain manufacturing functions to dental laboratories, and the rising demand for customized/fabricated dental framing solutions required for various applications.

“North America accounted for the largest share of the dental 3D printing market in 2021”

In 2021, North America accounted for the largest share of 35.8% of the dental 3D printing market, followed by Europe, the Asia Pacific, and Latin America. The large share of the North American market can be attributed to the high and growing incidence of dental caries and tooth loss, the rising geriatric population, high oral care expenditure, increasing demand for cosmetic dentistry, and the rising popularity of digital dentistry. However, the Asia Pacific region is projected to grow at the highest CAGR of 22.6% during the forecast period. The growing geriatric population, increasing demand for digital dental solutions to ease the clinical workflow, growing dental tourism, rising disposable incomes, and the growing focus of leading market players on expanding their distribution networks in the emerging APAC countries drive market growth.

Geographic Snapshot: Dental 3D printing Market

Dental 3D Printing Market by Region

To know about the assumptions considered for the study, download the pdf brochure

Key Market Players :

The prominent players in the global dental 3D printing market include Stratasys (US), 3D Systems (US), Roland DG Corporation (Japan), EnvisionTEC US LLC (Germany), DWS Systems SRL (Italy), Align Technology Inc. (US), Formlabs (US), Prodways Group (France), SLM Solutions (Germany), Carbon, Inc. (US), Concept Laser (Germany), EOS GmbH (Germany), Rapid Shape GmbH (Germany), Asiga (Australia), DENTSPLY Sirona, Inc. (US), SprintRay, Inc. (US), Zortrax (Poland), Detax Ettlingen GmbH (Germany), DMG America (US), 3Dresyns (Spain), Micron Dental (US), Amann Girrbach AG (Austria), Carima (South Korea), Planmeca OY (Finland), and Shenzhen PioCreat 3D Technology Co., Ltd. (China).

Get online access to the report on the World's First Market Intelligence Cloud

  • Easy to Download Historical Data & Forecast Numbers
  • Company Analysis Dashboard for high growth potential opportunities
  • Research Analyst Access for customization & queries
  • Competitor Analysis with Interactive dashboard
  • Latest News, Updates & Trend analysis
Request Sample

Scope of the Report

:

Report Metric

Details

Market Size Available for Years

2020–2027

Base Year Considered

2021

Forecast Period

2022–2027

Forecast Unit

Value (USD Billion)

Segments Covered

By Product & Services, Technology, Application, End User and Region

Countries Covered

  • North America
    • US
    • Canada
  • Europe
    • Germany
    • France
    • UK
    • Italy
    • Spain
    • Rest of Europe
  • Asia Pacific
    • Japan
    • China
    • India
    • Australia
    • Rest of APAC
  • Latin America
    • Brazil
    • Rest of LATAM
  • Middle East and Africa

Companies Covered

Stratasys (US), 3D Systems (US), Roland DG Corporation (Japan), EnvisionTEC US LLC (Germany), DWS Systems SRL (Italy), Align Technology Inc. (US), Formlabs (US), Prodways Group (France), SLM Solutions (Germany), Carbon, Inc. (US), Concept Laser (Germany), EOS GmbH (Germany), Rapid Shape GmbH (Germany), Asiga (Australia), DENTSPLY Sirona, Inc. (US), SprintRay, Inc. (US), Zortrax (Poland), Detax Ettlingen GmbH (Germany), DMG America (US), 3Dresyns (Spain), Micron Dental (US), Amann Girrbach AG (Austria), Carima (South Korea), Planmeca OY (Finland), and Shenzhen PioCreat 3D Technology Co., Ltd. (China).

The research report categorizes dental 3D printing market into the following segments and sub-segments:

By Product & Services

  • Services
  • Material
    • Plastic
    • Metal
    • Others
  • Equipment
    • Dental 3D Scanners
    • Dental 3D Printers

By Technology

  • Vat Photopolymerization
    • Stereolithography (SLA)
    • Digital Light Processing (DLP)
    • Liquid Crystal Display (LCD)
  • Selective Laser Sintering
  • PolyJet Technology
  • Fused Deposition Modeling
  • Others

By Application

  • Prosthodontics
  • Orthodontics
  • Implantology

By End User

  • Dental Laboratories
  • Dental Hospitals and Clinics
  • Academic & Research Institutions

By Country

  • North America
    • US
    • Canada
  • Europe
    • Germany
    • France
    • UK
    • Italy
    • Spain
    • Rest of Europe
  • Asia Pacific
    • Japan
    • China
    • India
    • Australia
    • Rest of APAC
  • Latin America
    • Brazil
    • Rest of LATAM
  • Middle East and Africa

Recent Developments:

  • In January 2022, Formlabs (US) Launched Form 3+ and Form 3B+ includes next-generation Build Platform 2, which uses patented Quick Release Technology and a flexible print surface to instantly release parts from the build platform
  • In December 2021, Stratasys Ltd. (US) launched Origin One Dental 3D Printer. The new printer is the second 3D printer resulting from Stratasys’ acquisition of Origin in December 2020.
  • In September 2021, Carbon, Inc. (US) partnered with Keystone Industries (US). This partnership builds on Carbon's industry leadership in developing digital denture solutions that are enabling a new standard of care for edentulous patients.

Frequently Asked Questions (FAQ):

To speak to our analyst for a discussion on the above findings, click Speak to Analyst

TABLE OF CONTENTS

1 INTRODUCTION (Page No. - 33)
    1.1 OBJECTIVES OF THE STUDY
    1.2 MARKET DEFINITION
           1.2.1 INCLUSIONS AND EXCLUSIONS
    1.3 MARKET SCOPE
           1.3.1 MARKETS COVERED
           1.3.2 YEARS CONSIDERED FOR THE STUDY
    1.4 CURRENCY
           TABLE 1 STANDARD CURRENCY CONVERSION RATES
    1.5 LIMITATIONS
    1.6 STAKEHOLDERS
    1.7 SUMMARY OF CHANGES

2 RESEARCH METHODOLOGY (Page No. - 38)
    2.1 RESEARCH DATA
           FIGURE 1 RESEARCH DESIGN
           2.1.1 SECONDARY DATA
                    2.1.1.1 Key data from secondary sources
           2.1.2 PRIMARY DATA
                    FIGURE 2 PRIMARY SOURCES
                    2.1.2.1 Key data from primary sources
                    2.1.2.2 Key industry insights
                               FIGURE 3 BREAKDOWN OF PRIMARY INTERVIEWS BY COMPANY TYPE, DESIGNATION, AND REGION
    2.2 MARKET SIZE ESTIMATION
           FIGURE 4 MARKET SIZE ESTIMATION: REVENUE SHARE ANALYSIS (2021)
           FIGURE 5 MARKET SIZE ESTIMATION: COMPANY-WISE REVENUE SHARE ANALYSIS (2021)
           FIGURE 6 SUPPLY SIDE ANALYSIS: DENTAL 3D PRINTING MARKET (2021)
           FIGURE 7 DEMAND SIDE APPROACH: BASED ON DENTAL 3D PRINTER MARKET (2021)
           FIGURE 8 DRIVERS, RESTRAINTS, OPPORTUNITIES, AND CHALLENGES IN DENTAL 3D PRINTING MARKET
           FIGURE 9 CAGR PROJECTIONS: SUPPLY SIDE ANALYSIS OF DENTAL 3D PRINTING MARKET (2020)
    2.3 MARKET BREAKDOWN AND DATA TRIANGULATION
           FIGURE 10 DATA TRIANGULATION METHODOLOGY
    2.4 MARKET SHARE ESTIMATION
    2.5 ASSUMPTIONS FOR THE STUDY
    2.6 COVID-19 HEALTH ASSESSMENT
    2.7 COVID-19 ECONOMIC ASSESSMENT
    2.8 ASSESSMENT OF COVID-19 IMPACT ON ECONOMIC SCENARIO
           FIGURE 11 CRITERIA IMPACTING THE GLOBAL ECONOMY
           FIGURE 12 RECOVERY SCENARIO OF THE GLOBAL ECONOMY
    2.9 ASSESSMENT OF COVID-19 IMPACT ON ECONOMIC SCENARIO IN DENTAL 3D PRINTING MARKET

3 EXECUTIVE SUMMARY (Page No. - 54)
    FIGURE 14 DENTAL 3D PRINTING EQUIPMENT AND MATERIAL MARKET, BY TECHNOLOGY, 2022 VS. 2027 (USD MILLION)
    FIGURE 15 DENTAL 3D PRINTING MARKET, BY APPLICATION, 2022 VS. 2027 (USD MILLION)
    FIGURE 16 DENTAL 3D PRINTING MARKET, BY END USER, 2022 VS. 2027 (USD MILLION)
    FIGURE 17 DENTAL 3D PRINTING MARKET : GEOGRAPHICAL SNAPSHOT

4 PREMIUM INSIGHTS (Page No. - 58)
    4.1 DENTAL 3D PRINTING MARKET OVERVIEW
           FIGURE 18 HIGH INCIDENCE OF DENTAL CARIES TO DRIVE GLOBAL DENTAL 3D PRINTING MARKET GROWTH
    4.2 ASIA PACIFIC DENTAL 3D PRINTING MARKET, BY APPLICATION AND COUNTRY
           FIGURE 19 PROSTHODONTICS TO ACCOUNT FOR LARGEST SHARE IN ASIA PACIFIC
    4.3 DENTAL 3D PRINTING MARKET: GEOGRAPHIC GROWTH OPPORTUNITIES
           FIGURE 20 CHINA TO GROW AT HIGHEST CAGR DURING FORECAST PERIOD
    4.4 REGIONAL MIX: DENTAL 3D PRINTING MARKET (2022–2027)
    4.5 DENTAL 3D PRINTING MARKET: DEVELOPED VS. DEVELOPING MARKETS, 2022 VS. 2027 (USD MILLION)

5 MARKET OVERVIEW (Page No. - 62)
    5.1 INTRODUCTION
    5.2 MARKET DYNAMICS
           FIGURE 21 DENTAL 3D PRINTING MARKET: DRIVERS, RESTRAINTS, OPPORTUNITIES, AND CHALLENGES
           5.2.1 DRIVERS
                    5.2.1.1 High incidence of dental caries and other dental diseases
                    5.2.1.2 Rising demand for cosmetic dentistry and preventive dental care
                               FIGURE 22 US: PATIENT SPENDING ON COSMETIC DENTISTRY SERVICES, 2017 VS 2019 (USD MILLION)
                    5.2.1.3 Growth in Edentulism in geriatric population
                               TABLE 2 GROWTH IN THE GERIATRIC POPULATION
                    5.2.1.4 Rapidity, accuracy, and less labor-intensive processes in dental 3D printing
           5.2.2 RESTRAINTS
                    5.2.2.1 Lack of skilled workforce due to limited specialized training in additive manufacturing
           5.2.3 OPPORTUNITIES
                    5.2.3.1 Increasing popularity of CAD/CAM technology
                               TABLE 3 MAJOR INTRAORAL SCANNERS INTEGRATED WITH CAD/CAM LAUNCHED IN RECENT YEARS
                    5.2.3.2 Advancements in resins used for dental 3D printing
           5.2.4 CHALLENGES
                    5.2.4.1 High capital investment and operating costs
                    5.2.4.2 Rising number of large dental practices
    5.3 PORTER'S FIVE FORCES ANALYSIS
           TABLE 4 DENTAL 3D PRINTING MARKET: PORTER’S FIVE FORCES ANALYSIS
           5.3.1 THREAT FROM NEW ENTRANTS
           5.3.2 THREAT FROM SUBSTITUTES
           5.3.3 BARGAINING POWER OF SUPPLIERS
           5.3.4 BARGAINING POWER OF BUYERS
           5.3.5 INTENSITY OF COMPETITIVE RIVALRY
    5.4 PATENT ANALYSIS
           5.4.1 PATENT PUBLICATION TRENDS FOR DENTAL 3D PRINTING
                    FIGURE 23 PATENT PUBLICATION TRENDS FOR DENTAL 3D PRINTING, 2016–2021
           5.4.2 TOP APPLICANTS (COMPANIES) FOR DENTAL 3D PRINTING PATENTS
                    FIGURE 24 TOP APPLICANT COMPANIES FOR DENTAL 3D PRINTING PATENTS, 2016–2021
           5.4.3 JURISDICTION ANALYSIS: TOP APPLICANTS (COUNTRIES) FOR DENTAL 3D PRINTING PATENTS
                    FIGURE 25 JURISDICTION ANALYSIS: TOP APPLICANT COUNTRIES FOR DENTAL 3D PRINTING PATENTS, 2016–2021
    5.5 TECHNOLOGY ANALYSIS
    5.6 AVERAGE SELLING PRICE TREND
           TABLE 5 DENTAL 3D PRINTERS: MAJOR BRANDS WITH APPROXIMATE PRICING (USD) IN US
           TABLE 6 AVERAGE SELLING PRICE OF DENTAL 3D PRINTERS, BY REGION, 2015 VS. 2020
    5.7 VALUE CHAIN ANALYSIS
           FIGURE 26 DENTAL 3D PRINTING MARKET: VALUE CHAIN ANALYSIS (2021)
    5.8 ECOSYSTEM MAP
           FIGURE 27 DENTAL 3D PRINTING MARKET: ECOSYSTEM MAP (2021)

6 INDUSTRY INSIGHTS (Page No. - 77)
    6.1 INTRODUCTION
    6.2 EVOLUTION OF DENTAL 3D PRINTING TECHNOLOGY
           FIGURE 28 DENTAL 3D PRINTING: EVOLUTION
    6.3 INDUSTRY TRENDS
           6.3.1 ADVANCED 3D PRINTING MATERIALS FOR DENTAL APPLICATIONS
           6.3.2 RISING ADOPTION OF DIGITAL DENTISTRY
                    FIGURE 29 WORKFLOW COMPARISON: TRADITIONAL VS. DIGITAL DENTISTRY
           6.3.3 CONSOLIDATION OF DENTAL LABORATORIES
    6.4 REGULATORY LANDSCAPE
           6.4.1 US
           6.4.2 EU
           6.4.3 CHINA

7 DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE (Page No. - 82)
    7.1 INTRODUCTION
           TABLE 7 DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
           TABLE 8 DENTAL 3D PRINTING MARKET, BY COUNTRY, 2020–2027 (USD MILLION)
    7.2 SERVICES
           7.2.1 COST-EFFECTIVENESS TO BOOST SERVICES SECTOR GROWTH
                    TABLE 9 DENTAL 3D PRINTING SERVICES MARKET, BY COUNTRY, 2020–2027 (USD MILLION)
    7.3 MATERIALS
           TABLE 10 DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
           TABLE 11 DENTAL 3D PRINTING MATERIALS MARKET, BY COUNTRY,  2020–2027 (USD MILLION)
           7.3.1 PLASTICS
                    7.3.1.1 Advancements in material quality and increasing versatility to promote segment growth
                               TABLE 12 DENTAL 3D PRINTING MARKET FOR PLASTICS, BY COUNTRY, 2020–2027 (USD MILLION)
           7.3.2 METALS
                    7.3.2.1 Superior mechanical strength and surface finish offered by metals to drive market growth
                               TABLE 13 DENTAL 3D PRINTING MARKET FOR METALS, BY COUNTRY, 2020–2027 (USD MILLION)
           7.3.3 OTHER MATERIALS
                    TABLE 14 LIQUID RESINS AVAILABLE IN THE DENTAL 3D PRINTING MARKET
                    TABLE 15 DENTAL 3D PRINTING MARKET FOR OTHER MATERIALS, BY COUNTRY, 2020–2027 (USD MILLION)
    7.4 EQUIPMENT
           TABLE 16 DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
           TABLE 17 DENTAL 3D PRINTING EQUIPMENT MARKET, BY COUNTRY,  2020–2027 (USD MILLION)
           7.4.1 DENTAL 3D SCANNERS
                    7.4.1.1 Increasing affordability and utility of dental 3D scanners to support segment growth
                               TABLE 18 DENTAL 3D SCANNERS MARKET, BY COUNTRY, 2020–2027 (USD MILLION)
           7.4.2 DENTAL 3D PRINTERS
                    7.4.2.1 Workflow enhancements and benefits of digitization to drive dental 3D printers adoption
                               TABLE 19 DENTAL 3D PRINTERS MARKET, BY COUNTRY, 2020–2027 (USD MILLION)

8 DENTAL 3D PRINTING EQUIPMENT AND MATERIAL MARKET, BY TECHNOLOGY (Page No. - 96)
    8.1 INTRODUCTION
           TABLE 20 DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
    8.2 VAT PHOTOPOLYMERIZATION
           TABLE 21 VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
           TABLE 22 VAT PHOTOPOLYMERIZATION MARKET, BY COUNTRY, 2020–2027 (USD MILLION)
           8.2.1 STEREOLITHOGRAPHY
                    8.2.1.1 Rapidity, ease of use, and accuracy to drive stereolithography adoption
                               TABLE 23 STEREOLITHOGRAPHY MARKET, BY COUNTRY, 2020–2027 (USD MILLION)
           8.2.2 DIGITAL LIGHT PROCESSING
                    8.2.2.1 Low output quality of DLP printing to hamper market growth
                               TABLE 24 DIGITAL LIGHT PROCESSING MARKET, BY COUNTRY, 2020–2027 (USD MILLION)
           8.2.3 LIQUID CRYSTAL DISPLAY
                    8.2.3.1 Smooth surface finish with fast and accurate printing to  boost LCD technology growth
                               TABLE 25 MAJOR COMPANIES OFFERING DENTAL LCD 3D PRINTERS
                               TABLE 26 LIQUID CRYSTAL DISPLAY MARKET, BY COUNTRY, 2020–2027 (USD MILLION)
    8.3 SELECTIVE LASER SINTERING
           8.3.1 HIGH PRODUCTIVITY OF SLS TO ENCOURAGE SEGMENT GROWTH
                    TABLE 27 SELECTIVE LASER SINTERING MARKET, BY COUNTRY, 2020–2027 (USD MILLION)
    8.4 POLYJET PRINTING
           8.4.1 HIGH PRECISION AND WIDE VARIETY OF APPLICATIONS OF POLYJET TECHNOLOGY TO BOOST MARKET GROWTH
                    TABLE 28 POLYJET PRINTING MARKET, BY COUNTRY, 2020–2027 (USD MILLION)
    8.5 FUSED DEPOSITION MODELING
           8.5.1 LOW COST OF FDM TECHNOLOGY-BASED PRINTERS TO DRIVE MARKET GROWTH
                    TABLE 29 FUSED DEPOSITION MODELING MARKET, BY COUNTRY, 2020–2027 (USD MILLION)
    8.6 OTHER TECHNOLOGIES
           TABLE 30 OTHER DENTAL 3D PRINTING TECHNOLOGIES MARKET, BY COUNTRY, 2020–2027 (USD MILLION)

9 DENTAL 3D PRINTING MARKET, BY APPLICATION (Page No. - 108)
    9.1 INTRODUCTION
           TABLE 31 DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
    9.2 PROSTHODONTICS
           9.2.1 GROWING EDENTULOUS POPULATION TO DRIVE 3D PRINTING IN PROSTHODONTICS GROWTH
                    TABLE 32 DENTAL 3D PRINTING MARKET FOR PROSTHODONTICS, BY COUNTRY, 2020–2027 (USD MILLION)
    9.3 ORTHODONTICS
           9.3.1 IMPROVEMENT IN CLINICAL WORKFLOW IN ORTHODONTICS DUE TO INCORPORATION OF 3D PRINTING TO DRIVE PRODUCT DEMAND
                    TABLE 33 DENTAL 3D PRINTING MARKET FOR ORTHODONTICS, BY COUNTRY, 2020–2027 (USD MILLION)
    9.4 IMPLANTOLOGY
           9.4.1 GROWING PREFERENCE FOR 3D-PRINTED DENTAL IMPLANTS TO SUPPORT MARKET GROWTH
                    TABLE 34 DENTAL 3D PRINTING MARKET FOR IMPLANTOLOGY, BY COUNTRY, 2020–2027 (USD MILLION)

10 DENTAL 3D PRINTING MARKET, BY END USER (Page No. - 113)
     10.1 INTRODUCTION
               TABLE 35 DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
     10.2 DENTAL LABORATORIES
             10.2.1 RAPID ADOPTION OF ADVANCED TECHNOLOGIES BY DENTAL LABORATORIES TO PROPEL SEGMENT GROWTH
                       TABLE 36 DENTAL 3D PRINTING MARKET FOR DENTAL LABORATORIES, BY COUNTRY, 2020–2027 (USD MILLION)
     10.3 DENTAL HOSPITALS & CLINICS
             10.3.1 GROWING NUMBER OF DENTAL CLINICS & HOSPITALS AND INCREASING TARGET POPULATION TO PROMOTE MARKET GROWTH
                       TABLE 37 DENTAL 3D PRINTING MARKET FOR DENTAL HOSPITALS & CLINICS, BY COUNTRY, 2020–2027 (USD MILLION)
     10.4 DENTAL ACADEMIC & RESEARCH INSTITUTES
             10.4.1 GROWING APPLICATION OF DENTAL 3D PRINTING IN PRECLINICAL EDUCATION TO BOOST SEGMENT GROWTH
                       TABLE 38 TOP 10 NIDCR GRANTS TO US DENTAL INSTITUTIONS
                       TABLE 39 DENTAL 3D PRINTING MARKET FOR DENTAL ACADEMIC & RESEARCH INSTITUTES, BY COUNTRY, 2020–2027 (USD MILLION)

11 DENTAL 3D PRINTING MARKET, BY REGION (Page No. - 119)
     11.1 INTRODUCTION
               FIGURE 30 US TO DOMINATE DENTAL 3D MARKET DURING FORECAST PERIOD
               TABLE 40 DENTAL 3D PRINTING MARKET, BY REGION, 2020–2027 (USD MILLION)
     11.2 NORTH AMERICA
               FIGURE 31 NORTH AMERICA: DENTAL 3D PRINTING MARKET SNAPSHOT
               TABLE 41 NORTH AMERICA: DENTAL 3D PRINTING, BY COUNTRY,  2020–2027 (USD MILLION)
               TABLE 42 NORTH AMERICA: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
               TABLE 43 NORTH AMERICA: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
               TABLE 44 NORTH AMERICA: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
               TABLE 45 NORTH AMERICA: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
               TABLE 46 NORTH AMERICA: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
               TABLE 47 NORTH AMERICA: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
               TABLE 48 NORTH AMERICA: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.2.1 US
                       11.2.1.1 Presence of prominent market players and high per capita income to boost market growth
                                   TABLE 49 US: MACROECONOMIC INDICATORS
                                   FIGURE 32 US: RISE IN DENTAL EXPENDITURE, 2010–2020
                                   TABLE 50 US: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
                                   TABLE 51 US: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 52 US: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 53 US: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                                   TABLE 54 US: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 55 US: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
                                   TABLE 56 US: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.2.2 CANADA
                       11.2.2.1 Rising healthcare expenditure and favorable public & private funding to support market growth
                                   TABLE 57 CANADA: MACROECONOMIC INDICATORS
                                   TABLE 58 CANADA: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
                                   TABLE 59 CANADA: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 60 CANADA: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 61 CANADA: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                                   TABLE 62 CANADA: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 63 CANADA: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
                                   TABLE 64 CANADA: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
     11.3 EUROPE
               FIGURE 33 EUROPE: DENTAL 3D PRINTING MARKET SNAPSHOT
               TABLE 65 EUROPE: DENTAL 3D PRINTING MARKET, BY COUNTRY, 2020–2027 (USD MILLION)
               TABLE 66 EUROPE: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
               TABLE 67 EUROPE: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
               TABLE 68 EUROPE: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
               TABLE 69 EUROPE: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
               TABLE 70 EUROPE: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
               TABLE 71 EUROPE: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
               TABLE 72 EUROPE: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.3.1 GERMANY
                       11.3.1.1 Germany to dominate market growth in Europe
                                   TABLE 73 GERMANY: MACROECONOMIC INDICATORS
                                   TABLE 74 GERMANY: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
                                   TABLE 75 GERMANY: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 76 GERMANY: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 77 GERMANY: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                                   TABLE 78 GERMANY: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 79 GERMANY: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
                                   TABLE 80 GERMANY: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.3.2 UK
                       11.3.2.1 Increasing incidence of dental disorders and favorable coverage under NHS to support market growth
                                   TABLE 81 UK: MACROECONOMIC INDICATORS
                                   TABLE 82 UK: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
                                   TABLE 83 UK: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 84 UK: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 85 UK: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                                   TABLE 86 UK: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 87 UK: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
                                   TABLE 88 UK: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.3.3 FRANCE
                       11.3.3.1 Favorable government healthcare strategies and rising dental professionals to drive market growth
                                   TABLE 89 FRANCE: MACROECONOMIC INDICATORS
                                   TABLE 90 FRANCE: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
                                   TABLE 91 FRANCE: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 92 FRANCE: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE,  2020–2027 (USD MILLION)
                                   TABLE 93 FRANCE: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                                   TABLE 94 FRANCE: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 95 FRANCE: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
                                   TABLE 96 FRANCE: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.3.4 ITALY
                       11.3.4.1 Increasing dental expenditure and low cost of dental treatment to drive market growth
                                   TABLE 97 ITALY: MACROECONOMIC INDICATORS
                                   TABLE 98 ITALY: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
                                   TABLE 99 ITALY: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 100 ITALY: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 101 ITALY: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                                   TABLE 102 ITALY: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 103 ITALY: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
                                   TABLE 104 ITALY: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.3.5 SPAIN
                       11.3.5.1 Improving dental market and infrastructure to drive market growth
                                   TABLE 105 SPAIN: MACROECONOMIC INDICATORS
                                   TABLE 106 SPAIN: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
                                   TABLE 107 SPAIN: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 108 SPAIN: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 109 SPAIN: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                                   TABLE 110 SPAIN: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 111 SPAIN: DENTAL 3D PRINTING MARKET, BY APPLICATION,  2020–2027 (USD MILLION)
                                   TABLE 112 SPAIN: DENTAL 3D PRINTING MARKET, BY END USER,  2020–2027 (USD MILLION)
             11.3.6 REST OF EUROPE
                       TABLE 113 ROE: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE,  2020–2027 (USD MILLION)
                       TABLE 114 ROE: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                       TABLE 115 ROE: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                       TABLE 116 ROE: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                       TABLE 117 ROE: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                       TABLE 118 ROE: DENTAL 3D PRINTING MARKET, BY APPLICATION,  2020–2027 (USD MILLION)
                       TABLE 119 ROE: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
     11.4 ASIA PACIFIC
               FIGURE 34 ASIA PACIFIC: DENTAL 3D PRINTING MARKET SNAPSHOT
               TABLE 120 APAC: NEEDLE-FREE INJECTION SYSTEM MARKET, BY COUNTRY, 2020–2027 (USD MILLION)
               TABLE 121 APAC: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
               TABLE 122 APAC: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
               TABLE 123 APAC: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE,  2020–2027 (USD MILLION)
               TABLE 124 APAC: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
               TABLE 125 APAC: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
               TABLE 126 APAC: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
               TABLE 127 APAC: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.4.1 CHINA
                       11.4.1.1 Increasing dental caries in China to dominate market growth
                                   TABLE 128 CHINA: MACROECONOMIC INDICATORS
                                   TABLE 129 CHINA: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE,  2020–2027 (USD MILLION)
                                   TABLE 130 CHINA: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 131 CHINA: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 132 CHINA: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                                   TABLE 133 CHINA: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 134 CHINA: DENTAL 3D PRINTING MARKET, BY APPLICATION,  2020–2027 (USD MILLION)
                                   TABLE 135 CHINA: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.4.2 JAPAN
                       11.4.2.1 Growth in geriatric population and dental diseases to drive market growth
                                   TABLE 136 JAPAN: MACROECONOMIC INDICATORS
                                   TABLE 137 JAPAN: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
                                   TABLE 138 JAPAN: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 139 JAPAN: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 140 JAPAN: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                                   TABLE 141 JAPAN: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 142 JAPAN: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
                                   TABLE 143 JAPAN: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.4.3 INDIA
                       11.4.3.1 Growing dental market with increasing private players to drive market growth
                                   TABLE 144 INDIA: MACROECONOMIC INDICATORS
                                   TABLE 145 INDIA: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
                                   TABLE 146 INDIA: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 147 INDIA: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 148 INDIA: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                                   TABLE 149 INDIA: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 150 INDIA: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
                                   TABLE 151 INDIA: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.4.4 AUSTRALIA
                       11.4.4.1 Favorable government initiatives and growing dental diseases to support market growth
                                   TABLE 152 AUSTRALIA: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
                                   TABLE 153 AUSTRALIA: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE,  2020–2027 (USD MILLION)
                                   TABLE 154 AUSTRALIA: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 155 AUSTRALIA: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                                   TABLE 156 AUSTRALIA: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 157 AUSTRALIA: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
                                   TABLE 158 AUSTRALIA: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.4.5 REST OF ASIA PACIFIC
                       TABLE 159 ROAPAC: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
                       TABLE 160 ROAPAC: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                       TABLE 161 ROAPAC: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                       TABLE 162 ROAPAC: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                       TABLE 163 ROAPAC: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                       TABLE 164 ROAPAC: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
                       TABLE 165 ROAPAC: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
     11.5 LATIN AMERICA
               TABLE 166 LATIN AMERICA: DENTAL 3D PRINTING MARKET, BY COUNTRY, 2020–2027 (USD MILLION)
               TABLE 167 LATIN AMERICA: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
               TABLE 168 LATIN AMERICA: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
               TABLE 169 LATIN AMERICA: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
               TABLE 170 LATIN AMERICA: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
               TABLE 171 LATIN AMERICA: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
               TABLE 172 LATIN AMERICA: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
               TABLE 173 LATIN AMERICA: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.5.1 BRAZIL
                       11.5.1.1 Rising investments in R&D and growing popularity of 3D dental printing to promote market growth
                                   TABLE 174 BRAZIL: MACROECONOMIC INDICATORS
                                   TABLE 175 BRAZIL: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE ,  2020–2027 (USD MILLION)
                                   TABLE 176 BRAZIL: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE,  2020–2027 (USD MILLION)
                                   TABLE 177 BRAZIL: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 178 BRAZIL: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                                   TABLE 179 BRAZIL: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                                   TABLE 180 BRAZIL: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
                                   TABLE 181 BRAZIL: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
             11.5.2 REST OF LATIN AMERICA
                       TABLE 182 REST OF LATIN AMERICA: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
                       TABLE 183 REST OF LATIN AMERICA: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                       TABLE 184 REST OF LATIN AMERICA: DENTAL 3D PRINTING MATERIALS MARKET,  BY TYPE , 2020–2027 (USD MILLION)
                       TABLE 185 REST OF LATIN AMERICA: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY, 2020–2027 (USD MILLION)
                       TABLE 186 REST OF LATIN AMERICA: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                       TABLE 187 REST OF LATIN AMERICA: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
                       TABLE 188 REST OF LATIN AMERICA: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)
     11.6 MIDDLE EAST & AFRICA
             11.6.1 RISING PRESENCE OF MARKET PLAYERS AND INCREASING AWARENESS TO PROMOTE MARKET GROWTH
                       TABLE 189 MEA: DENTAL 3D PRINTING MARKET, BY PRODUCT & SERVICE, 2020–2027 (USD MILLION)
                       TABLE 190 MEA: DENTAL 3D PRINTING EQUIPMENT MARKET, BY TYPE, 2020–2027 (USD MILLION)
                       TABLE 191 MEA: DENTAL 3D PRINTING MATERIALS MARKET, BY TYPE, 2020–2027 (USD MILLION)
                       TABLE 192 MEA: DENTAL 3D PRINTING MARKET, BY TECHNOLOGY,  2020–2027 (USD MILLION)
                       TABLE 193 MEA: VAT PHOTOPOLYMERIZATION MARKET, BY TYPE, 2020–2027 (USD MILLION)
                       TABLE 194 MEA: DENTAL 3D PRINTING MARKET, BY APPLICATION, 2020–2027 (USD MILLION)
                       TABLE 195 MEA: DENTAL 3D PRINTING MARKET, BY END USER, 2020–2027 (USD MILLION)

12 COMPETITIVE LANDSCAPE (Page No. - 186)
     12.1 OVERVIEW
             12.1.1 KEY PLAYER STRATEGIES/RIGHT TO WIN
                       FIGURE 35 OVERVIEW OF STRATEGIES ADOPTED BY MAJOR PLAYERS IN DENTAL 3D PRINTING MARKET
     12.2 REVENUE SHARE ANALYSIS FOR KEY PLAYERS
               FIGURE 36 REVENUE SHARE ANALYSIS FOR KEY PLAYERS IN DENTAL 3D PRINTING MARKET
     12.3 MARKET SHARE ANALYSIS
               FIGURE 37 DENTAL 3D PRINTING MARKET SHARE ANALYSIS, BY KEY PLAYER (2021)
               TABLE 196 DENTAL 3D PRINTINGS MARKET: DEGREE OF COMPETITION
     12.4 R&D ASSESSMENT OF KEY PLAYERS
               FIGURE 38 R&D EXPENDITURE: MAJOR PLAYERS IN DENTAL 3D PRINTING MARKET, 2018 VS. 2020
     12.5 GEOGRAPHIC REVENUE ASSESSMENT OF KEY PLAYERS
               FIGURE 39 GEOGRAPHIC REVENUE ASSESSMENT: DENTAL 3D PRINTING MARKET (2020)
     12.6 COMPANY EVALUATION QUADRANT
               FIGURE 40 DENTAL 3D PRINTING MARKET: COMPANY EVALUATION MATRIX, 2020
             12.6.1 STARS
             12.6.2 EMERGING LEADERS
             12.6.3 PERVASIVE PLAYERS
             12.6.4 PARTICIPANTS
     12.7 COMPETITIVE LEADERSHIP MAPPING FOR SMES & START-UPS
               FIGURE 41 DENTAL 3D PRINTING MARKET: COMPANY EVALUATION MATRIX FOR SMES & START-UP
             12.7.1 PROGRESSIVE COMPANIES
             12.7.2 DYNAMIC COMPANIES
             12.7.3 STARTING BLOCKS
             12.7.4 RESPONSIVE COMPANIES
     12.8 COMPETITIVE BENCHMARKING
             12.8.1 OVERALL COMPANY FOOTPRINT
                       TABLE 197 OVERALL COMPANY FOOTPRINT (25 COMPANIES)
                       TABLE 198 COMPANY FOOTPRINT: BY PRODUCT TYPE (25 COMPANIES)
                       TABLE 199 COMPANY FOOTPRINT: BY TECHNIQUE (25 COMPANIES)
                       TABLE 200 COMPANY FOOTPRINT: BY APPLICATION (25 COMPANIES)
                       TABLE 201 COMPANY FOOTPRINT: BY END USER (25 COMPANIES)
                       TABLE 202 COMPANY FOOTPRINT: BY REGION (25 COMPANIES)
     12.9 COMPETITIVE SCENARIO
             12.9.1 PRODUCT LAUNCHES
                       TABLE 203 PRODUCT LAUNCHES & APPROVALS (2021–2022)
             12.9.2 EXPANSIONS
                       TABLE 204 EXPANSIONS (2019)
             12.9.3 DEALS
                       TABLE 205 DEALS (2020 – 2021)

13 COMPANY PROFILES (Page No. - 206)
     13.1 KEY PLAYERS
(Business Overview, Products Offered, Recent Developments, and MnM View (Key strengths/Right to Win, Strategic Choices Made, and Weaknesses and Competitive Threats))*
             13.1.1 STRATASYS
                       TABLE 206 STRATASYS: BUSINESS OVERVIEW
                       FIGURE 42 STRATASYS: COMPANY SNAPSHOT (2020)
             13.1.2 3D SYSTEMS, INC.
                       TABLE 207 3D SYSTEMS: BUSINESS OVERVIEW
                       FIGURE 43 3D SYSTEMS: COMPANY SNAPSHOT (2020)
             13.1.3 ENVISIONTEC US LLC (DESKTOP METAL)
                       TABLE 208 NVISIONTEC: BUSINESS OVERVIEW
             13.1.4 DWS SYSTEMS SRL
                       TABLE 209 DWS SYSTEMS SRL: BUSINESS OVERVIEW
             13.1.5 ALIGN TECHNOLOGY, INC.
                       TABLE 210 ALIGN TECHNOLOGY: BUSINESS OVERVIEW
                       FIGURE 44 ALIGN TECHNOLOGY: COMPANY SNAPSHOT (2020)
             13.1.6 FORMLABS
                       TABLE 211 FORMLABS: BUSINESS OVERVIEW
             13.1.7 PRODWAYS GROUP
                       TABLE 212 PRODWAYS GROUP: BUSINESS OVERVIEW
                       FIGURE 45 PRODWAYS GROUP: COMPANY SNAPSHOT (2020)
             13.1.8 SLM SOLUTIONS
                       TABLE 213 SLM SOLUTIONS: BUSINESS OVERVIEW
                       FIGURE 46 SLM SOLUTIONS GROUP AG: COMPANY SNAPSHOT (2020)
             13.1.9 CARBON, INC.
                       TABLE 214 CARBON INC.: BUSINESS OVERVIEW
             13.1.10 CONCEPT LASER
                       TABLE 215 CONCEPT LASER: BUSINESS OVERVIEW
     13.2 OTHER PLAYERS
             13.2.1 EOS GMBH
                       TABLE 216 EOS GMBH: BUSINESS OVERVIEW
             13.2.2 RAPID SHAPE GMBH
                       TABLE 217 RAPID SHAPE: BUSINESS OVERVIEW
             13.2.3 ASIGA
                       TABLE 218 ASIGA: BUSINESS OVERVIEW
             13.2.4 ROLAND DG CORPORATION
                       TABLE 219 ROLAND DG CORPORATION: BUSINESS OVERVIEW
                       FIGURE 47 ROLAND DG CORPORATION: COMPANY SNAPSHOT (2020)
             13.2.5 DENTSPLY SIRONA
                       TABLE 220 DENTSPLY SIRONA: BUSINESS OVERVIEW
                       FIGURE 48 DENTSPLY SIRONA: COMPANY SNAPSHOT (2020)
             13.2.6 SPRINTRAY INC.
                       TABLE 221 SPRINTRAY INC.: BUSINESS OVERVIEW
             13.2.7 ZORTRAX
                       TABLE 222 ZORTRAX: BUSINESS OVERVIEW
             13.2.8 DETAX ETTLINGEN GMBH
                       TABLE 223 DETAX ETTLINGEN GMBH: BUSINESS OVERVIEW
             13.2.9 DMG AMERICA
                       TABLE 224 DMG AMERICA: BUSINESS OVERVIEW
             13.2.10 3DRESYNS
                       TABLE 225 3DRESYNS: BUSINESS OVERVIEW
             13.2.11 MICRON DENTAL
                       TABLE 226 MICRON DENTAL: BUSINESS OVERVIEW
             13.2.12 AMANN GIRRBACH AG
                       TABLE 227 AMANN GIRRBACH: BUSINESS OVERVIEW
             13.2.13 CARIMA
                       TABLE 228 CARIMA: BUSINESS OVERVIEW
             13.2.14 PLANMECA OY
                       TABLE 229 PLANMECA: BUSINESS OVERVIEW
             13.2.15 SHENZHEN PIOCREAT 3D TECHNOLOGY CO., LTD
                       TABLE 230 SHENZHEN PIOCREAT 3D TECHNOLOGY CO., LTD: BUSINESS OVERVIEW

*Details on Business Overview, Products Offered, Recent Developments, and MnM View (Key strengths/Right to Win, Strategic Choices Made, and Weaknesses and Competitive Threats) might not be captured in case of unlisted companies.

14 APPENDIX (Page No. - 265)
     14.1 INSIGHTS OF INDUSTRY EXPERTS
     14.2 DISCUSSION GUIDE
     14.3 KNOWLEDGE STORE: MARKETSANDMARKETS’ SUBSCRIPTION PORTAL
     14.4 AVAILABLE CUSTOMIZATIONS
     14.5 RELATED REPORTS
     14.6 AUTHOR DETAILS

This study involved four major approaches in estimating the current dental 3D printing market size. Extensive research was conducted to collect information on the market as well as its peer and parent markets. The next step was to validate these findings, assumptions, and sizing with industry experts across the value chain through primary research. Both top-down and bottom-up approaches were employed to estimate the value market. After that, market breakdown and data triangulation procedures were used to estimate the market size of segments and subsegments.

Secondary Research

This research study involved the widespread usage of secondary sources; directories; databases such as Bloomberg Business, Factiva, and Dun & Bradstreet; white papers; annual reports; company house documents; investor presentations; and SEC filings of companies. Secondary research was used to identify and collect information useful for the extensive, technical, market-oriented, and commercial study of the dental 3D printing market. It was also used to obtain important information about the key players and market classification & segmentation according to industry trends to the bottom-most level and key developments related to market and technology perspectives. A database of the key industry leaders was also prepared using secondary research.

Primary Research

In the primary research process, various sources from both the supply and demand sides were interviewed to obtain qualitative and quantitative information for this report. Primary sources from the supply side include industry experts such as CEOs, vice presidents, marketing and sales directors, technology and innovation directors, and related key executives from various key companies and organizations operating in the dental 3D printing market. Primary sources from the demand side include personnel from hospitals, dental labs, professors, researchers etc.

Market Size Estimation

The total size of the dental 3D printing market was arrived at after data triangulation from four different approaches, as mentioned below. The market size estimates and forecasts provided in this study are derived through a mix of the bottom-up approach (revenue share analysis of leading players) and top-down approach (assessment of utilization/adoption/penetration trends, by product, technology, application, end user, and region).

Bottom-up Approach: Revenues of individual companies were gathered from public sources and databases. Shares of the dental 3D printing businesses of leading players were gathered from secondary sources to the extent available. In certain cases, the share of the business unit was ascertained after a detailed analysis of various parameters, including product portfolio, market positioning, selling price, and geographic reach and strength. Individual shares or revenue estimates were validated through expert interviews.

Country level Analysis: The size of the dental 3D printing market was obtained from the annual presentations of leading players and secondary data available in the public domain. The share of products and services in the overall dental 3D printing market was obtained from secondary data and validated by primary participants to arrive at the total dental 3D printing market. Primary participants further validated the numbers.

Primary Interviews: As a part of the primary research process, individual respondent insights on the market size and growth were taken during the interview (regional and global, as applicable). All the responses were collated, and a weighted average was taken to derive a probabilistic estimate of the market size and growth rate.

Geographic market assessment (by region & country): The geographic assessment was done using the following approaches:

Approach 1: Geographic revenue contributions/splits of leading players in the market (wherever available) and respective growth trends

Approach 2: Geographic adoption trends for individual product segments by end users and growth prospects for each of the segments (assumptions and indicative estimates validated from primary interviews)

At each point, the assumptions and approaches were validated through industry experts contacted during primary research. Considering the limitations of data available from secondary research, revenue estimates for individual companies (for the overall dental 3D printing market and geographic market assessment) were ascertained based on a detailed analysis of their respective product offerings, geographic reach/strength (direct or through distributors or suppliers), and the shares of the leading players in a particular region or country.

A breakdown of the primary respondents for dental 3D printing market (supply side) market is provided below:

Dental 3D Printing Market Size, and Share

To know about the assumptions considered for the study, download the pdf brochure

Data Triangulation

After arriving at the market size, the total market was divided into several segments and subsegments. To complete the overall market engineering process and arrive at the exact statistics for all segments and subsegments, data triangulation and market breakdown procedures were employed wherever applicable.

Approach to derive the market size and estimate market growth

The market rankings for leading players were ascertained after a detailed assessment of their revenues from the dental 3D printing business using secondary data available through paid and unpaid sources. Owing to data limitations, in certain cases, the revenue share was arrived at after a detailed assessment of the product portfolios of major companies and their respective sales performance. At each point, this data was validated through primary interviews with industry experts.

Objectives of the Study

  • To define, describe, analyze, and forecast the dental 3D printing market by product, technology, application, end user, and region
  • To provide detailed information about the major factors influencing the market growth (drivers, restraints, opportunities, and challenges)
  • To analyze micromarkets with respect to individual growth trends, prospects, and contributions to the overall market
  • To analyze market opportunities for stakeholders and provide details of the competitive landscape for key players
  • To forecast the size of the dental 3D printing market in North America, Europe, the Asia Pacific, Latin America, and the Middle East & Africa
  • To strategically profile key players in the global dental 3D printing market and comprehensively analyze their core competencies2
  • To track and analyze competitive developments such as product launches, expansions, acquisitions, partnerships, agreements, and other developments of leading players in the global dental 3D printing market

Available Customizations

With the given market data, MarketsandMarkets offers customizations as per the company’s specific needs. The following customization options are available for the report:

Geographic Analysis

  • Further breakdown of the Rest of Europe dental 3D printing market into the Netherlands, Austria, Belgium, and others
  • Further breakdown of the Rest of the Asia Pacific dental 3D printing market into Singapore, Malaysia, and others

Company Information

  • Detailed analysis and profiling of additional market players
Dental 3D Printing Market Size,  Share & Growth Report
Report Code
MD 6394
Published ON
Mar, 2022
Choose License Type
BUY NOW
GET A FREE SAMPLE

This FREE sample includes market data points, ranging from trend analyses to market estimates & forecasts. See for yourself.

SEND ME A FREE SAMPLE
+1-888-600-6441
  • Call Us
  • +1-888-600-6441 (Corporate office hours)
  • +1-888-600-6441 (US/Can toll free)
  • +44-800-368-9399 (UK office hours)
CONNECT WITH US
ABOUT TRUST ONLINE
©2022 MarketsandMarkets Research Private Ltd. All rights reserved