Printed Electronics Market with COVID-19 Impact Analysis by Printing Technology (Screen Printing, Inkjet Printing), Application (Displays, PV Cells), Resolution, Material (Inks, Substrates), End-use Industry, and Geography - Global Forecast to 2026
[280 Pages Report] The global printed electronics market is projected to reach USD 23.0 billion by 2026 from an estimated USD 9.9 billion in 2021, at a CAGR of 18.3% from 2021 to 2026.
Growth of the consumer electronics industry and increased adoption of IoT by end-use industries are among the factors driving the growth of the printed electronics market.
To know about the assumptions considered for the study, Request for Free Sample Report
COVID-19 Impact on the Global Printed Electronics Market
The outbreak and the spread of the COVID-19 harmed the printed electronics market in 2020, resulting in decreased shipments of printed electronics. This resulted in a decline in revenue. As a result, a dip was witnessed in market growth during the first half of 2020. This trend continued to prevail till Q1 2021.
The spread of COVID-19 has impacted the display industry as manufacturers of display panels were witnessing production disruptions caused by lockdowns imposed in different countries since this industry is labor-intensive. The impact can be witnessed in the case of LG Display Co., Ltd., which focused on expanding its OLED production by ramping up production at its Guangzhou plant in China. The company faced production delays due to the COVID-19 pandemic, resulting in a reduction in display shipment.
Market Dynamics:
Driver: Increased demand for printed electronic products in automotive & transportation
The automotive & transportation end-use industry is the major end-user of printed electronics. Printed electronic products are widely used in automotive owing to their features, including thinness, robustness, and flexibility. Additionally, touch control technology and smart surfaces have become a standard in car interior interfacing. Thus, market players are carrying out technological advancements and design innovations in their offerings. For instance, in May 2021, Quad Industries (Belgium) designed and produced a versatile and robust capacitive touch sensor (printed sensors) and in-mold electronics (IME) to enhance innovation in car interior and exterior surfaces. The sensor made up of conductive ink is used to match automotive HMI applications, including HVAC controls, steering wheel commands, and overhead panels.
Printed electronics offer numerous benefits to automakers. Owing to this, automotive companies use printed electronics products such as OLED-based displays and lighting in their vehicles, printed sensors, and conductive elements in their vehicle seats. These features have become a standard in the global automotive industry and must be included in all present-day vehicles. The distinctive advantage of printed electronics in the automotive industry is that it enables the development of high-quality displays, lighting, and capacitive touch sensors to be embedded in the curved surfaces inside cars, collectively known as in-mold electronics. Major automotive manufacturers such as Jaguar Land Rover (UK), Audi (Germany), and BMW (Germany) use printed electronics in their OLED lights and seat heaters. For instance, Audi Q7 uses OLED tail lights as they have a unique form factor and are easily adjustable.
Printed electronic products such as sensors, lights, and displays are also used in transportation automobiles. According to the European Automobile Manufacturers’ Association (ACEA), in 2020, registrations of new electrically chargeable buses in Europe increased by 18.4% from 1,448 units in 2019 to 1,714 buses in 2020, representing a market share of 6.1%. In addition, registrations of hybrid buses totaled 2,662 units in 2020, an increase of 36% compared to 2019. Thus, the increase in demand for EVs and HVs in the region is expected to spur the growth of the printed electronics market. Additionally, printed electronics is expected to help automotive companies increase their market share and enhance their revenues. Thus, the demand for printed electronics is expected to increase substantially from the global automotive industry during the forecast period, thereby leading to the growth of the printed electronics market.
Restraint: High investment cost
When it comes to new technologies, cost reduction is often a strong driver of R&D efforts. However, the cost of new materials and equipment for printed electronics research is very high. Manufacturers thus need a huge focus on R&D to create value beyond cost reduction, such as thinner, lightweight, robust, and flexible products. Decisions regarding investments in certain technologies will be ruled by their material properties. The development of new technologies also needs precision machinery and trained personnel, adding to the overall costs. The high investment involved is thus a restraint for the printed electronics market.
Opportunity: Promising newer applications of printed electronics in healthcare
Printed electronics have facilitated the development of easily available, low-performance, and cost-effective electronic products in flexible displays, smart labels, smart sensors, and active clothing. They have also facilitated the incorporation of additional functionalities in existing electronic products.
In the healthcare industry, due to their benefits, printed electronic solutions such as sensors, batteries, inks, and RFID tags are used for different applications such as remote monitoring of patients for vital functions. Consequently, the development of innovative remote monitoring products has seen a surge. For instance, in 2020, Kinetic Analysis B.V. and QUAD Industries developed a smart shirt to measure respiration and transmit the measured data to the patient via a mobile app. It can also assist people with various lung diseases. Stretchable conductive inks are spread on thin films using screen-printing technology and then transferred to the shirt, making it washable. In the same year, Quad Industries, Byteflies, and Henkel collaborated to develop smart health patches for people suffering from chronic illnesses. Electronic patches monitor the patient’s vital signs less obtrusively in their homes, improving comfort and treatment efficacy.
Printed thin batteries play a vital role in making electronic devices used in medical implants and smartcards; they are thin, lightweight, and compact to fit in device packages. The prevailing trend of tracking the usage of prescribed drugs to avoid high medical care costs has led to a smart compliance card packaging solution containing printed carbon traces (silver inks) and a battery to log the time of medicines taken by patients. It also provides notifications to patients reminding them of their next dosage. These promising innovations undertaken by the market players are expected to create lucrative growth opportunities for printed electronics in the healthcare industry.
Challenge: Inadequate knowledge of appropriate material and design selection for smart building applications
Printed electronics encompasses various printing technologies and materials that can be used for different applications in various industries. The user must possess sound knowledge about several factors such as substrate and material selection, printing patterns selection, hardware integration, and software development when adopting the printed electronics approach. For instance, integrating printed sensors, displays, circuits, and other electronic components remains challenging for smart building applications. Other challenges encountered while using printed electronics for smart building include:
- Understanding materials and manufacturing processes best suited for standardizing the manufacturing of smart building materials
- Developing an effective printing pattern for a particular use-case or environment
- Developing small or flexible electronic components that can be easily incorporated into printed electronic devices
- Designing & developing connectors that enable a robust and reliable link between rigid hardware and a flexible substrate
- Developing software that can connect different sensors, electronic components, and devices in smart buildings
The screen printing technology to account for the largest size of the market during the forecast period.
Screen printing is one of the oldest and most versatile printing techniques used globally. This printing technique is used for printing posters, labels, signage boards, textiles, and electronic circuit boards, as well as to manufacture printed sensors and printed batteries. Screen printing produces electrodes and electrical lines of LED panels, touch panels, and solar cells. Additionally, the technology enables development of large designs and the thicker application of inks on the surface of substrates. Thus, the screen printing technology accounted the largest size of the printed electronics market during the forecast period.
The inks segment of the printed electronics market is projected to grow at the highest CAGR from 2021 to 2026
The inks segment held the major share of the printed electronics market in 2020. Also, the segment is projected to grow at a higher CAGR during the forecast period. Inks are one of the key materials used in the fabrication of printed electronics. The growth of the segment can be attributed to the increased demand for advanced printing technologies, improved quality conductive inks, and compact devices. For instance, graphene ink is being developed to develop low-cost, flexible, water-repellent, and highly conductive electronic circuits.
The printed electronics market for aerospace & defense is expected to witness growth at the highest CAGR during the forecast period
The printed electronics market for aerospace & defense is expected to witness growth at the highest CAGR during the forecast period. Printed electronics are largely being adopted in the aerospace & defense industry due to low weight, relative simplicity, and high reliability, resulting in low maintenance requirements. In addition, the printing of electronic circuits on 3D surfaces is enabling market players to develop advanced materials for missiles, aircraft wings, rockets, and other defense equipment.
In 2026, the APAC is projected to hold the largest share of the overall printed electronics market
To know about the assumptions considered for the study, download the pdf brochure
In 2026, the APAC is projected to hold the largest share of the overall printed electronics market. The market in the APAC is expected to grow at the highest CAGR during the forecast period. The APAC is a manufacturing hub for electronic devices and components. The growth of the printed electronics market in the APAC can be attributed to the large-scale production of electronic components and increased investments in R&D activities related to printed electronics in the region.
Countries such as China, Japan, South Korea, and Australia are major contributors to the growth of the printed electronics market in APAC. Factors such as the acceptance of innovative technologies and the increased popularity of advanced consumer electronics are driving the growth of the printed electronics market in this region.
Get online access to the report on the World's First Market Intelligence Cloud
- Easy to Download Historical Data & Forecast Numbers
- Company Analysis Dashboard for high growth potential opportunities
- Research Analyst Access for customization & queries
- Competitor Analysis with Interactive dashboard
- Latest News, Updates & Trend analysis
Request Sample Scope of the Report
Get online access to the report on the World's First Market Intelligence Cloud
- Easy to Download Historical Data & Forecast Numbers
- Company Analysis Dashboard for high growth potential opportunities
- Research Analyst Access for customization & queries
- Competitor Analysis with Interactive dashboard
- Latest News, Updates & Trend analysis
|
Report Metric |
Details |
|
Market Size Availability for Years |
2017–2026 |
|
Base Year |
2020 |
|
Forecast Period |
2021–2026 |
|
Forecast Units |
Value (USD) |
|
Segments Covered |
By printing technology, material, resolution, application, end-use application, and region |
|
Geographies Covered |
Americas, Europe, APAC, and RoW |
|
Companies Covered |
Samsung Electronics Co., Ltd. (South Korea), LG Display Co., Ltd. (South Korea), Molex, LLC (US), Agfa-Gevaert Group (Belgium), Palo Alto Research Center Incorporated (PARC) (US), DuPont de Nemours, Inc. (US), Nissha Co., Ltd. (Japan), BASF (Germany), NovaCentrix (US), and E Ink Holdings Inc. (Taiwan) are some of the key players in the printed electronics market. |
This research report categorizes the printed electronics market based on printing technology, material, resolution, application, end-use industry, and region
Printed electronics market:
Based on printing technology:
- Inkjet Printing
- Continuous Inkjet Printing
- Drop-on-demand Inkjet Printing
- Thermal drop-on-demand inkjet printing
- Piezo drop-on-demand inkjet printing
- Electrostatic drop-on-demand inkjet printing
- Screen Printing
- Flatbed Screen Printing
- Rotary Screen Printing
- Flexographic Printing
- Gravure Printing
- Other Printing Technologies
Note: Other printing technologies includes 3D printing, offset printing, reel-to-reel printing, pneumatic printing, aerosol jet printing, and nanoimprinting
Based on material
- Inks
- Conductive Inks
- Conductive silver inks
- Conductive copper inks
- Transparent conductive inks
- Silver copper inks
- Carbon inks
- Dielectric Inks
- Other Inks
- Conductive Inks
- Substrates
- Organic Substrates
- Polymers
- Polyimides
- Polyethylene naphthalate
- Polyethylene terephthalate
- Paper
- Polyacrylate
- Polystyrene
- Polyvinylpyrrolidone (PVP)
- Polyvinyl alcohol
- Other Organic Substrates
- Polymers
- Inorganic Substrates
- Glass
- Other Inorganic Substrates
Note: Other inorganic substrate includes silicon and metal oxides. Other inks include carbon nanotubes (CNT) and graphene inks
Based on resolution:
- Below 100 Lines/CM
- 100 To 200 Lines/CM
- Above 200 Lines/CM
Based on applications:
- Displays
- E-paper Displays
- Electrochromic displays
- Electrophoretic displays
- Other e-paper displays
- Electroluminescent (EL) Displays
- OLED displays
- Flexible OLED displays
- LCD
- E-paper Displays
- RFID Tags
- Batteries
- Photovoltaic Cells
- Sensors
- Touch Sensors
- Gas Sensors
- Humidity Sensors
- Pressure Sensors
- Image Sensors
- Temperature Sensors
- Others
- Lighting
- Electroluminescent Lighting
- Organic Light-emitting Diode (OLED) Lighting
- Other Applications
Based on end-use industry:
- Automotive & Transportation
- Healthcare
- Consumer Electronics
- Aerospace & Defense
- Construction & Architecture
- Retail & Packaging
- Other End-use Industries
Different substrates transport techniques used in printed electronics:
- Roll-to-Roll
- Sheet-to-Sheet
- Sheet-on-Shuttle
Based on region:
- Americas
- North America
- US
- Canada
- Mexico
- South America
- North America
- Europe
- France
- Germany
- UK
- Rest of Europe
- APAC
- China
- Australia
- Japan
- South Korea
- Rest of APAC
- Rest of the world
- Middle East
- Africa
Key Market Players
Samsung Electronics Co., Ltd. (South Korea), LG Display Co., Ltd. (South Korea), Molex, LLC (US), Agfa-Gevaert Group (Belgium), Palo Alto Research Center Incorporated (PARC) (US), DuPont de Nemours, Inc. (US), Nissha Co., Ltd. (Japan), BASF (Germany), NovaCentrix (US), and E Ink Holdings Inc. (Taiwan) are some of the key players in the printed electronics market.
Recent Developments
- In 2021 September, Samsung Electronics Co., Ltd. launched its latest monitor, the 24-inch Webcam Monitor S4 (Model Name: S40VA), designed to suit the needs of hybrid workers. With a built-in webcam, speakers, and microphones, the monitor helps users connect and collaborate with ease.
- In 2021 July, DuPont acquired Laired Performance Materials (China), a well-known electromagnetic shielding and thermal management solutions company. This acquisition will support the company’s electronic and industrial segments.
- In 2021 April, E Ink Holdings Inc. signed an agreement with DATA MODUL (Germany), a well-known company for display, touch, and embedded monitors, to become a reseller focusing on the US and European markets.
- In 2021 January, LG Electronics acquired the controlling stake in a TV data and measurement firm, ALPHONSO. This will allow the company to provide even more customized services and content to consumers.
- In 2021 February, DuPont Interconnect Solutions, a unit of DuPont Electronics & Industrial, invested USD 220 million for expanding the production of Kapton polyimide film and Pyralux flexible circuit materials at the Circleville site. The investment will ensure a committed supply of Kapton and Pyralux to meet the growing global demand in the automotive, consumer electronics, telecom, high-performing industrial, and defense market segments.
Frequently Asked Questions (FAQ):
Which are the major companies in the printed electronics market? What are their major strategies to strengthen their market presence?
The major companies in the Printed Electronics market are – Samsung Electronics Co., Ltd. (South Korea), LG Display Co., Ltd. (South Korea), Molex, LLC (US), Agfa-Gevaert Group (Belgium), and Palo Alto Research Center Incorporated (PARC) (US). The major strategies adopted by these players are product launches, expansions, partnerships, collaborations, agreements, and acquisitions.
Which is the potential market for printed electronics in terms of the region?
The APAC region is expected to dominate the printed electronics market due to the presence of numerous consumers and raw material as well as printed electronics manufacturing companies.
What are the opportunities for new market entrants?
There are significant opportunities in the printed electronics market for start-up companies. These companies can provide printed electronics solutions to healthcare and packaging industry. Also, they can develop printed electronic solutions that can be used to reduce electromagnetic interference associated with 5G technology
What are the drivers and opportunities for the printed electronics market?
Factors such as growth of the consumer electronics industry and increased adoption of IoT by end-use industries are among the driving factors of the printed electronics market. Moreover, promising newer applications of printed electronics in healthcare and the increased focus on smart packaging to create lucrative opportunities in the printed electronics market.
Who are the major consumers of printed electronics that are expected to drive the growth of the market in the next 5 years?
The major consumers for printed electronics are automotive & transportation, consumer electronics, and healthcare industries are expected to have a significant share in this market. .
To speak to our analyst for a discussion on the above findings, click Speak to Analyst
TABLE OF CONTENTS
1 INTRODUCTION (Page No. - 38)
1.1 STUDY OBJECTIVES
1.2 MARKET DEFINITION AND SCOPE
1.2.1 INCLUSIONS AND EXCLUSIONS
1.3 STUDY SCOPE
1.3.1 MARKETS COVERED
FIGURE 1 PRINTED ELECTRONICS MARKET SEGMENTATION
1.3.2 YEARS CONSIDERED
1.4 CURRENCY
1.5 STAKEHOLDERS
1.6 SUMMARY OF CHANGES
2 RESEARCH METHODOLOGY (Page No. - 43)
2.1 RESEARCH DATA
FIGURE 2 PRINTED ELECTRONICS MARKET: RESEARCH DESIGN
2.1.1 SECONDARY DATA
2.1.1.1 List of key secondary sources
2.1.1.2 Secondary sources
2.1.2 PRIMARY DATA
2.1.2.1 Breakdown of primaries
2.1.2.2 Key data from primary sources
2.1.2.3 Key industry insights
2.2 FACTOR ANALYSIS
FIGURE 3 MARKET SIZE ESTIMATION METHODOLOGY, APPROACH 1: TOP-DOWN (SUPPLY-SIDE)—REVENUES GENERATED BY COMPANIES FROM THE SALES OF PRINTED ELECTRONICS
FIGURE 4 MARKET SIZE ESTIMATION METHODOLOGY, APPROACH 1—TOP-DOWN (SUPPLY-SIDE): ILLUSTRATION OF REVENUE ESTIMATIONS FOR ONE COMPANY IN THE PRINTED ELECTRONICS MARKET
FIGURE 5 MARKET SIZE ESTIMATION METHODOLOGY, APPROACH 2—BOTTOM-UP (DEMAND SIDE): DEMAND FOR PRINTED ELECTRONICS IN DIFFERENT APPLICATIONS
2.3 MARKET SIZE ESTIMATION
2.3.1 BOTTOM-UP APPROACH
2.3.1.1 Approach for obtaining market share using bottom-up analysis (demand side)
FIGURE 6 MARKET SIZE ESTIMATION METHODOLOGY: BOTTOM-UP APPROACH
2.3.2 TOP-DOWN APPROACH
2.3.2.1 Approach for obtaining market share using top-down analysis (supply side)
FIGURE 7 MARKET SIZE ESTIMATION METHODOLOGY: TOP-DOWN APPROACH
2.4 MARKET BREAKDOWN AND DATA TRIANGULATION
FIGURE 8 DATA TRIANGULATION
2.5 RESEARCH ASSUMPTIONS AND LIMITATIONS
2.5.1 ASSUMPTIONS
2.5.2 LIMITATIONS
3 EXECUTIVE SUMMARY (Page No. - 54)
3.1 IMPACT OF COVID-19 ON PRINTED ELECTRONICS MARKET
FIGURE 9 GLOBAL PROPAGATION OF COVID-19
TABLE 1 RECOVERY SCENARIOS FOR THE GLOBAL ECONOMY
3.2 REALISTIC SCENARIO
3.3 OPTIMISTIC SCENARIO
3.4 PESSIMISTIC SCENARIO
FIGURE 10 GROWTH PROJECTIONS OF PRINTED ELECTRONICS MARKET IN REALISTIC, OPTIMISTIC, AND PESSIMISTIC SCENARIOS
TABLE 2 PRE AND POST-COVID-19 SCENARIO OF PRINTED ELECTRONICS MARKET, 2017–2026 (USD MILLION)
FIGURE 11 PRE AND POST-COVID-19 SCENARIOS OF PRINTED ELECTRONICS MARKET
TABLE 3 LG DISPLAY CO. LTD.: QUARTER-WISE DISPLAY AREA SHIPMENT, 2019–2020 (MILLION SQUARE METERS)
FIGURE 12 SCREEN PRINTING TO HOLD LARGEST SIZE OF PRINTED ELECTRONICS MARKET FROM 2021 TO 2026
FIGURE 13 INKS SEGMENT PROJECTED TO LEAD PRINTED ELECTRONICS MARKET, BY MATERIAL, FROM 2021 TO 2026
FIGURE 14 DISPLAYS APPLICATION SEGMENT TO HOLD LARGEST SIZE OF PRINTED ELECTRONICS MARKET FROM 2021 TO 2026
FIGURE 15 AEROSPACE & DEFENSE END-USE INDUSTRY SEGMENT TO GROW AT HIGHEST CAGR DURING FORECAST PERIOD
FIGURE 16 APAC ACCOUNTED FOR LARGEST SHARE OF PRINTED ELECTRONICS MARKET IN 2026
4 PREMIUM INSIGHTS (Page No. - 64)
4.1 PRINTED ELECTRONICS MARKET OPPORTUNITIES
FIGURE 17 INCREASED GLOBAL ADOPTION OF PRINTED ELECTRONICS IN IOT APPLICATIONS TO FUEL MARKET GROWTH FROM 2021 TO 2026
4.2 PRINTED ELECTRONICS MARKET, BY TECHNOLOGY AND APPLICATION
FIGURE 18 SCREEN PRINTING AND DISPLAYS TO BE LARGEST SHAREHOLDERS IN GLOBAL PRINTED ELECTRONICS MARKET, BY TECHNOLOGY AND APPLICATION, RESPECTIVELY, IN 2026
4.3 PRINTED ELECTRONICS MARKET, BY SUBSTRATE
FIGURE 19 ORGANIC SUBSTRATES TO ACCOUNT FOR LARGER SIZE OF PRINTED ELECTRONICS MARKET FOR SUBSTRATES IN 2026
4.4 PRINTED ELECTRONICS MARKET, BY END-USE INDUSTRY
FIGURE 20 AUTOMOTIVE & TRANSPORTATION TO ACCOUNT FOR LARGEST SHARES OF PRINTED ELECTRONICS MARKET IN 2026
4.5 PRINTED ELECTRONICS MARKET, BY REGION
FIGURE 21 APAC TO CAPTURE LARGEST SHARE OF GLOBAL PRINTED ELECTRONICS MARKET IN 2026
4.6 PRINTED ELECTRONICS MARKET, BY COUNTRY
FIGURE 22 CHINA TO RECORD HIGHEST CAGR IN GLOBAL PRINTED ELECTRONICS MARKET DURING FORECAST PERIOD
5 MARKET OVERVIEW (Page No. - 68)
5.1 INTRODUCTION
5.2 MARKET DYNAMICS
FIGURE 23 PRINTED ELECTRONICS MARKET: DRIVERS, RESTRAINTS, OPPORTUNITIES, AND CHALLENGES
5.2.1 DRIVERS
5.2.1.1 Increased demand for printed electronic products in automotive & transportation
5.2.1.2 Growth of the consumer electronics industry
FIGURE 24 GLOBAL NUMBER OF SMARTPHONE USERS (BILLIONS) (2016–2021)
5.2.1.3 Increased adoption of IoT by end-use industries
5.2.1.4 Significant cost advantages offered by printed electronics
FIGURE 25 PRINTED ELECTRONICS MARKET DRIVERS AND THEIR IMPACT
5.2.2 RESTRAINTS
5.2.2.1 High investment cost
FIGURE 26 PRINTED ELECTRONICS MARKET RESTRAINTS AND THEIR IMPACT
5.2.3 OPPORTUNITIES
5.2.3.1 Promising newer applications of printed electronics in healthcare
5.2.3.2 Smart packaging to create lucrative growth opportunities for printed electronics
5.2.3.3 Use of printed electronics to reduce electromagnetic interference associated with 5G technology
FIGURE 27 PRINTED ELECTRONICS MARKET OPPORTUNITIES AND THEIR IMPACT
5.2.4 CHALLENGES
5.2.4.1 Inadequate knowledge of appropriate material and design selection for smart building applications
5.2.4.2 Commercialization of graphene-based printed electronics
FIGURE 28 PRINTED ELECTRONICS MARKET CHALLENGES AND THEIR IMPACT
5.3 SUPPLY CHAIN ANALYSIS
FIGURE 29 SUPPLY CHAIN OF THE PRINTED ELECTRONICS MARKET
5.4 TRENDS/DISRUPTIONS IMPACTING THE BUSINESS OF MARKET PLAYERS AND RAW MATERIAL SUPPLIERS
5.4.1 REVENUE SHIFT AND NEW REVENUE POCKETS FOR PRINTED ELECTRONICS MARKET PLAYERS
FIGURE 30 REVENUE SHIFT IN THE PRINTED ELECTRONICS MARKET
5.5 PRINTED ELECTRONICS ECOSYSTEM
FIGURE 31 PRINTED ELECTRONICS ECOSYSTEM
TABLE 4 LIST OF ORIGINAL EQUIPMENT MANUFACTURERS, SUPPLIERS, AND DISTRIBUTORS OF PRINTED ELECTRONICS
5.6 PORTER’S FIVE FORCES MODEL
TABLE 5 PRINTED ELECTRONICS MARKET: PORTER’S FIVE FORCES ANALYSIS
FIGURE 32 PORTER’S FIVE FORCES ANALYSIS
5.6.1 INTENSITY OF COMPETITIVE RIVALRY
5.6.2 BARGAINING POWER OF SUPPLIERS
5.6.3 BARGAINING POWER OF BUYERS
5.6.4 THREAT OF SUBSTITUTES
5.6.5 THREAT OF NEW ENTRANTS
5.7 CASE STUDY
5.7.1 HUSHBRUSH APPROACHED THE CENTRE FOR PROCESS INNOVATION LIMITED (CPI) TO MANUFACTURE A SENSORY BRUSH THAT SUPPORTS EARLY DEVELOPMENT AND CHILD WELLBEING
5.7.2 US DEPARTMENT OF ENERGY’S ADVANCED RESEARCH PROJECTS AGENCY-ENERGY (ARPA-E) PARTNERED WITH PARC TO DEVELOP A LOW-COST SYSTEM FOR DETECTING METHANE LEAKS AT NATURAL GAS WELLS
5.7.3 CARBON NANOTUBE (CNT) HYBRID MATERIALS FROM CHASM ADVANCED MATERIALS, INC. HELP REDUCE LEAD TIMES AND MANUFACTURING COST
5.7.4 NOVARES COLLABORATED WITH FLEXENABLE TO INTEGRATE CURVED DISPLAYS IN ITS DEMO CAR
5.8 TECHNOLOGY ANALYSIS
5.8.1 COMPLEMENTARY TECHNOLOGIES
5.8.1.1 Active matrix organic light-emitting diodes (AMOLED)
5.8.2 ADJACENT TECHNOLOGIES
5.8.2.1 Soft lithography
5.9 AVERAGE SELLING PRICE ANALYSIS
TABLE 6 AVERAGE SELLING PRICE FOR PRINTED ELECTRONICS MATERIALS
5.10 TRADE ANALYSIS
5.10.1 IMPORT SCENARIO
TABLE 7 IMPORT DATA, BY COUNTRY, 2016–2020 (USD BILLION)
5.10.2 EXPORT SCENARIO
TABLE 8 EXPORT DATA, BY COUNTRY, 2016–2020 (USD BILLION)
5.11 PATENT ANALYSIS, 2015–2021
FIGURE 33 PATENTS GRANTED WORLDWIDE FROM 2011 TO 2021
TABLE 9 TOP 20 PATENT OWNERS IN US FROM 2011 TO 2021
FIGURE 34 TOP 10 COMPANIES WITH THE HIGHEST NUMBER OF PATENT APPLICATIONS, 2011–2021
5.12 TARIFFS AND REGULATIONS
5.12.1 TARIFFS
5.12.2 REGULATORY COMPLIANCE
5.12.3 STANDARDS
5.12.4 PRINTED ELECTRONICS ASSOCIATIONS
6 DIFFERENT SUBSTRATE TRANSPORT TECHNIQUES IN PRINTED ELECTRONICS (Page No. - 94)
6.1 INTRODUCTION
6.2 ROLL-TO-ROLL
6.3 SHEET-TO-SHEET
6.4 SHEETS-ON-SHUTTLE
7 PRINTED ELECTRONICS MARKET, BY PRINTING TECHNOLOGY (Page No. - 96)
7.1 INTRODUCTION
FIGURE 35 PRINTED ELECTRONICS MARKET, BY PRINTING TECHNOLOGY
FIGURE 36 SCREEN PRINTING TO ACCOUNT FOR LARGEST SIZE OF PRINTED ELECTRONICS MARKET IN 2021
TABLE 10 PRINTED ELECTRONICS MARKET, BY PRINTING TECHNOLOGY, 2017–2020 (USD MILLION)
TABLE 11 PRINTED ELECTRONICS MARKET, BY PRINTING TECHNOLOGY, 2021–2026 (USD MILLION)
TABLE 12 PRINTED ELECTRONICS MARKET, IN TERMS OF VALUE AND VOLUME, 2017–2020 (USD MILLION)
TABLE 13 PRINTED ELECTRONICS MARKET, IN TERMS OF VALUE AND VOLUME, 2021–2026 (USD MILLION)
7.2 SCREEN PRINTING
7.2.1 FLATBED SCREEN PRINTING
7.2.1.1 Flatbed screen printing technology is ideal for the development of products that require a precise thickness of ink
7.2.2 ROTARY SCREEN PRINTING
7.2.2.1 Rising demand for rotary screen printing due to its durability
FIGURE 37 DISPLAYS TO ACCOUNT FOR LARGEST SIZE OF PRINTED ELECTRONICS MARKET FOR SCREEN PRINTING DURING FORECAST PERIOD
TABLE 14 PRINTED ELECTRONICS MARKET FOR SCREEN PRINTING, BY APPLICATION, 2017–2020 (USD MILLION)
TABLE 15 PRINTED ELECTRONICS MARKET FOR SCREEN PRINTING, BY APPLICATION, 2021–2026 (USD MILLION)
7.3 INKJET PRINTING
7.3.1 CONTINUOUS INKJET PRINTING
7.3.1.1 Continuous inkjet printing technology is ideal for providing traceability data and complying with increasingly strict industry legislation
7.3.2 DROP-ON-DEMAND INKJET PRINTING
7.3.2.1 Thermal DoD inkjet printing
7.3.2.1.1 Thermal DoD inkjet printers produce excellent print quality
7.3.2.2 Piezo DoD inkjet printing
7.3.2.2.1 Piezo DoD inkjet printing is a fast, advanced, and accurate technique for developing printed electronics
7.3.2.3 Electrostatic DoD inkjet printing
7.3.2.3.1 Growing use of electrostatic DoD inkjet printing for selected cost-effective applications
TABLE 16 PRINTED ELECTRONICS MARKET FOR INKJET PRINTING, BY APPLICATION, 2017–2020 (USD MILLION)
TABLE 17 PRINTED ELECTRONICS MARKET FOR INKJET PRINTING, BY APPLICATION, 2021–2026 (USD MILLION)
TABLE 18 PRINTED ELECTRONICS MARKET FOR INKJET PRINTING, BY RESOLUTION, 2017–2020 (USD MILLION)
TABLE 19 PRINTED ELECTRONICS MARKET FOR INKJET PRINTING, BY RESOLUTION, 2021–2026 (USD MILLION)
7.4 FLEXOGRAPHIC PRINTING
7.4.1 FLEXOGRAPHIC PRINTING TECHNOLOGY ENABLES HIGH-SPEED AND CONTINUOUS PATTERN PRINTING
TABLE 20 PRINTED ELECTRONICS MARKET FOR FLEXOGRAPHIC PRINTING, BY APPLICATION, 2017–2020 (USD MILLION)
TABLE 21 PRINTED ELECTRONICS MARKET FOR FLEXOGRAPHIC PRINTING, BY APPLICATION, 2021–2026 (USD MILLION)
7.5 GRAVURE PRINTING
7.5.1 GRAVURE PRINTING IS IDEAL FOR LONG-RUN PRINTING PROCESSES
FIGURE 38 PV CELLS TO CAPTURE SECOND-LARGEST SHARE OF THE GRAVURE PRINTING ELECTRONICS MARKET FROM 2021-2026
TABLE 22 PRINTED ELECTRONICS MARKET FOR GRAVURE PRINTING, BY APPLICATION, 2017–2020 (USD MILLION)
TABLE 23 PRINTED ELECTRONICS MARKET FOR GRAVURE PRINTING, BY APPLICATION, 2021–2026 (USD MILLION)
7.6 OTHER PRINTING TECHNOLOGIES
7.6.1 3D PRINTING
7.6.2 OFFSET PRINTING
7.6.3 REEL-TO-REEL PRINTING
7.6.4 AEROSOL JET PRINTING
7.6.5 PNEUMATIC PRINTING
7.6.6 NANOIMPRINTING
TABLE 24 PRINTED ELECTRONICS MARKET FOR OTHER PRINTING TECHNOLOGIES, BY APPLICATION, 2017–2020 (USD MILLION)
TABLE 25 PRINTED ELECTRONICS MARKET FOR OTHER PRINTING TECHNOLOGIES, BY APPLICATION, 2021–2026 (USD MILLION)
TABLE 26 PRINTED ELECTRONICS MARKET FOR OTHER PRINTING TECHNOLOGIES, BY RESOLUTION, 2017–2020 (USD MILLION)
TABLE 27 PRINTED ELECTRONICS MARKET FOR OTHER PRINTING TECHNOLOGIES, BY RESOLUTION, 2021–2026 (USD MILLION)
8 PRINTED ELECTRONICS MARKET, BY MATERIAL (Page No. - 115)
8.1 INTRODUCTION
FIGURE 39 PRINTED ELECTRONICS MARKET, BY MATERIAL
FIGURE 40 INKS TO ACCOUNT FOR LARGER SIZE OF PRINTED ELECTRONICS MARKET IN 2021
TABLE 28 PRINTED ELECTRONICS MARKET, BY MATERIAL, 2017–2020 (USD MILLION)
TABLE 29 PRINTED ELECTRONICS MARKET, BY MATERIAL, 2021–2026 (USD MILLION)
8.2 INKS
TABLE 30 PRINTED ELECTRONICS MARKET FOR INKS, BY TYPE, 2017–2020 (USD MILLION)
TABLE 31 PRINTED ELECTRONICS MARKET FOR INKS, BY TYPE, 2021–2026 (USD MILLION)
8.2.1 CONDUCTIVE INKS
8.2.1.1 Conductive inks have high conductivity and cost-effectiveness
8.2.1.2 Conductive silver inks
8.2.1.3 Conductive copper inks
8.2.1.4 Transparent conductive inks
8.2.1.5 Silver copper inks
8.2.1.6 Carbon inks
8.2.2 DIELECTRIC INKS
8.2.2.1 Dielectric inks allow circuitry crossover and multilayer applications
8.2.3 OTHER INKS
8.2.3.1 Carbon nanotubes
8.2.3.2 Graphene inks
8.3 SUBSTRATES
FIGURE 41 ORGANIC SUBSTRATES TO ACCOUNT FOR LARGER SIZE OF PRINTED ELECTRONICS MARKET IN 2021
TABLE 32 PRINTED ELECTRONICS MARKET FOR SUBSTRATES, BY TYPE, 2017–2020 (USD MILLION)
TABLE 33 PRINTED ELECTRONICS MARKET FOR SUBSTRATES, BY TYPE, 2021–2026 (USD MILLION)
TABLE 34 PRINTED ELECTRONICS MARKET FOR ORGANIC AND INORGANIC SUBSTRATES, BY TYPE, 2017–2020 (USD MILLION)
TABLE 35 PRINTED ELECTRONICS MARKET FOR ORGANIC AND INORGANIC SUBSTRATES, BY TYPE, 2021–2026 (USD MILLION)
8.3.1 ORGANIC SUBSTRATES
8.3.1.1 Polymers
8.3.1.1.1 The use of polymers leads to low-cost printing of electronic components on flexible substrates
8.3.1.1.2 Polyimides
8.3.1.1.3 Polyethylene naphthalate
TABLE 36 BENEFITS AND APPLICATIONS OF POLYETHYLENE NAPHTHALENE (PEN)
8.3.1.1.4 Polyethylene terephthalate
TABLE 37 BENEFITS AND APPLICATIONS OF POLYETHYLENE TEREPHTHALATE (PET)
8.3.1.2 Paper
8.3.1.2.1 Paper offers flexibility, cost-effectiveness, and printing sustainability
8.3.1.2.2 Polyacrylate
8.3.1.2.3 Polystyrene
8.3.1.2.4 Polyvinylpyrrolidone
8.3.1.2.5 Polyvinyl alcohol
8.3.1.3 Other organic substrates
8.3.2 INORGANIC SUBSTRATES
8.3.2.1 Glass
8.3.2.1.1 Glass features excellent mechanical and optical properties
8.3.2.2 Other inorganic substrates
8.3.2.2.1 Silicon
8.3.2.2.2 Metal oxides
8.3.2.2.2.1 Silicon dioxide
8.3.2.2.2.2 Aluminum oxide
8.3.2.2.2.3 Titanium oxide
9 PRINTED ELECTRONICS MARKET, BY RESOLUTION (Page No. - 126)
9.1 INTRODUCTION
FIGURE 42 PRINTED ELECTRONICS MARKET, BY RESOLUTION
FIGURE 43 BELOW 100 LINES/CM TO DOMINATE PRINTED ELECTRONICS MARKET OVER FORECAST PERIOD
TABLE 38 PRINTED ELECTRONICS MARKET, BY RESOLUTION, 2017–2020 (USD MILLION)
TABLE 39 PRINTED ELECTRONICS MARKET, BY RESOLUTION, 2021–2026 (USD MILLION)
9.2 BELOW 100 LINES/CM
9.2.1 BELOW 100 LINES/CM SEGMENT HOLDS LARGEST SIZE OF PRINTED ELECTRONICS MARKET
TABLE 40 BELOW 100 LINES/CM PRINTED ELECTRONICS MARKET, BY PRINTING TECHNOLOGY, 2017–2020 (USD MILLION)
TABLE 41 BELOW 100 LINES/CM PRINTED ELECTRONICS MARKET, BY PRINTING TECHNOLOGY, 2021–2026 (USD MILLION)
9.3 100–200 LINES/CM
9.3.1 100–200 LINES/CM SEGMENT OF PRINTED ELECTRONICS MARKET PROJECTED TO GROW STEADILY FROM 2021 TO 2026
TABLE 42 100–200 LINES/CM PRINTED ELECTRONICS MARKET, BY PRINTING TECHNOLOGY, 2017–2020 (USD MILLION)
TABLE 43 100–200 LINES/CM PRINTED ELECTRONICS MARKET, BY PRINTING TECHNOLOGY, 2021–2026 (USD MILLION)
9.4 ABOVE 200 LINES/CM
9.4.1 ABOVE 200 LINES/CM RESOLUTION ENSURES HIGH-PERFORMANCE CIRCUIT FUNCTIONALITIES
TABLE 44 ABOVE 200 LINES/CM PRINTED ELECTRONICS MARKET, BY PRINTING TECHNOLOGY, 2017–2020 (USD MILLION)
TABLE 45 ABOVE 200 LINES/CM PRINTED ELECTRONICS MARKET, BY PRINTING TECHNOLOGY, 2021–2026 (USD MILLION)
10 PRINTED ELECTRONICS MARKET, BY APPLICATION (Page No. - 132)
10.1 INTRODUCTION
FIGURE 44 PRINTED ELECTRONICS MARKET, BY APPLICATION
FIGURE 45 DISPLAYS SEGMENT TO CAPTURE LARGEST SHARE OF PRINTED ELECTRONICS MARKET IN 2020
TABLE 46 PRINTED ELECTRONICS MARKET, BY APPLICATION, 2017–2020 (USD MILLION)
TABLE 47 PRINTED ELECTRONICS MARKET, BY APPLICATION, 2021–2026 (USD MILLION)
10.2 DISPLAYS
TABLE 48 PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY TYPE, 2017–2020 (USD MILLION)
TABLE 49 PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY TYPE, 2021–2026 (USD MILLION)
TABLE 50 PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY PRINTING TECHNOLOGY, 2017–2020 (USD MILLION)
TABLE 51 PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY PRINTING TECHNOLOGY, 2021–2026 (USD MILLION)
TABLE 52 PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY REGION, 2017–2020 (USD MILLION)
TABLE 53 PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY REGION, 2021–2026 (USD MILLION)
10.2.1 E-PAPER DISPLAYS
TABLE 54 PRINTED ELECTRONICS MARKET FOR E-PAPER DISPLAYS, BY TYPE, 2017–2020 (USD MILLION)
TABLE 55 PRINTED ELECTRONICS MARKET FOR E-PAPER DISPLAYS, BY TYPE, 2021–2026 (USD MILLION)
10.2.1.1 Electrochromic displays
10.2.1.1.1 Increasing global adoption of electrochromic displays owing to their consistent performance and flexibility
10.2.1.2 Electrophoretic displays
10.2.1.2.1 Rising use of electrophoretic displays by e-readers contributing to an increase in demand for these displays
10.2.1.3 Other e-paper displays
10.2.2 ELECTROLUMINESCENT DISPLAYS
10.2.2.1 OLED displays
10.2.2.1.1 Use of printed electronics in developing OLED displays makes them thinner, rollable, and more efficient
10.2.2.2 Flexible OLED displays
10.2.2.2.1 Prevailing trend of flexible consumer electronic devices projected to drive market for flexible OLED displays
10.2.2.3 LCDs
10.2.2.3.1 Highly suited to television and automotive applications
10.3 PHOTOVOLTAIC CELLS
10.3.1 RISING USE OF PRINTED PV CELLS TO ENHANCE EFFICIENCY OF SOLAR CONVERSION DEVICES
FIGURE 46 INKJET TECHNOLOGY FOR PV CELLS TO WITNESS GROWTH AT HIGHEST CAGR FROM 2021-2026
TABLE 56 PRINTED ELECTRONICS MARKET FOR PV CELLS, BY PRINTING TECHNOLOGY, 2017–2020 (USD MILLION)
TABLE 57 PRINTED ELECTRONICS MARKET FOR PV CELLS, BY PRINTING TECHNOLOGY, 2021–2026 (USD MILLION)
TABLE 58 PRINTED ELECTRONICS MARKET FOR PV CELLS, BY REGION, 2017–2020 (USD MILLION)
TABLE 59 PRINTED ELECTRONICS MARKET FOR PV CELLS, BY REGION, 2021–2026 (USD MILLION)
10.4 RFID TAGS
10.4.1 GROWING ADOPTION OF PRINTED RFID TAGS OVER SILICON CHIPS OWING TO THEIR COST BENEFITS
TABLE 60 PRINTED ELECTRONICS MARKET FOR RFID TAGS, BY PRINTING TECHNOLOGY, 2017–2020 (USD MILLION)
TABLE 61 PRINTED ELECTRONICS MARKET FOR RFID TAGS, BY PRINTING TECHNOLOGY, 2021–2026 (USD MILLION)
FIGURE 47 APAC TO CAPTURE LARGEST SHARE OF PRINTED ELECTRONICS MARKET FOR RFID TAGS FROM 2020–2026
TABLE 62 PRINTED ELECTRONICS MARKET FOR RFID TAGS, BY REGION, 2017–2020 (USD MILLION)
TABLE 63 PRINTED ELECTRONICS MARKET FOR RFID TAGS, BY REGION, 2021–2026 (USD MILLION)
10.5 LIGHTING
TABLE 64 PRINTED ELECTRONICS MARKET FOR LIGHTING, BY TYPE, 2017–2020 (USD MILLION)
TABLE 65 PRINTED ELECTRONICS MARKET FOR LIGHTING, BY TYPE, 2021–2026 (USD MILLION)
TABLE 66 PRINTED ELECTRONICS MARKET FOR LIGHTING, BY PRINTING TECHNOLOGY, 2017–2020 (USD MILLION)
TABLE 67 PRINTED ELECTRONICS MARKET FOR LIGHTING, BY PRINTING TECHNOLOGY, 2021–2026 (USD MILLION)
TABLE 68 PRINTED ELECTRONICS MARKET FOR LIGHTING, BY REGION, 2017–2020 (USD MILLION)
TABLE 69 PRINTED ELECTRONICS MARKET FOR LIGHTING, BY REGION, 2021–2026 (USD MILLION)
10.5.1 ELECTROLUMINESCENT LIGHTING
10.5.1.1 Electroluminescent lighting offers high flexibility and thin-form factor
10.5.2 ORGANIC LIGHT-EMITTING DIODE LIGHTING
10.5.2.1 Growing awareness of green building to increase the demand for printed OLED lighting
10.6 SENSORS
FIGURE 48 TRADITIONAL SENSOR MANUFACTURING PROCESS
FIGURE 49 PRINTED SENSOR MANUFACTURING PROCESS
FIGURE 50 HUMIDITY SENSORS TO WITNESS GROWTH AT A HIGHER CAGR
TABLE 70 PRINTED ELECTRONICS MARKET FOR SENSORS, BY TYPE, 2017–2020 (USD MILLION)
TABLE 71 PRINTED ELECTRONICS MARKET FOR SENSORS, BY TYPE, 2021–2026 (USD MILLION)
TABLE 72 PRINTED ELECTRONICS MARKET FOR SENSORS, BY PRINTING TECHNOLOGY, 2017–2020 (USD MILLION)
TABLE 73 PRINTED ELECTRONICS MARKET FOR SENSORS, BY PRINTING TECHNOLOGY, 2021–2026 (USD MILLION)
TABLE 74 PRINTED ELECTRONICS MARKET FOR SENSORS, BY REGION, 2017–2020 (USD MILLION)
TABLE 75 PRINTED ELECTRONICS MARKET FOR SENSORS, BY REGION, 2021–2026 (USD MILLION)
10.6.1 TOUCH SENSORS
10.6.1.1 Touch sensors are designed cost-effectively and effortlessly
10.6.2 GAS SENSORS
10.6.2.1 Growing concern for indoor and outdoor air quality to fuel market growth
10.6.3 HUMIDITY SENSORS
10.6.3.1 Humidity sensors help control environmental conditions
10.6.4 PRESSURE SENSORS
10.6.4.1 Technological advancements in printed pressure sensors make them ideal for healthcare applications
10.6.5 IMAGE SENSORS
10.6.5.1 Easily scalable into larger areas and high-pixel densities
10.6.6 TEMPERATURE SENSORS
10.6.6.1 Rising demand for reliable, high-performance, and low-cost temperature sensors fuels market growth
10.6.7 OTHER SENSORS
10.7 BATTERIES
10.7.1 PRINTED BATTERIES ARE IDEAL FOR HEALTHCARE APPLICATIONS
TABLE 76 PRINTED ELECTRONICS MARKET FOR BATTERIES, BY PRINTING TECHNOLOGY, 2017–2020 (USD MILLION)
TABLE 77 PRINTED ELECTRONICS MARKET FOR BATTERIES, BY PRINTING TECHNOLOGY, 2021–2026 (USD MILLION)
TABLE 78 PRINTED ELECTRONICS MARKET FOR BATTERIES, BY REGION, 2017–2020 (USD MILLION)
TABLE 79 PRINTED ELECTRONICS MARKET FOR BATTERIES, BY REGION, 2021–2026 (USD MILLION)
TABLE 80 PRINTED ELECTRONICS MARKET FOR BATTERIES, BY VOLTAGE, 2017–2020 (USD MILLION)
TABLE 81 PRINTED ELECTRONICS MARKET FOR BATTERIES, BY VOLTAGE, 2021–2026 (USD MILLION)
10.8 OTHER APPLICATIONS
TABLE 82 PRINTED ELECTRONICS MARKET FOR OTHER APPLICATIONS, BY PRINTING TECHNOLOGY, 2017–2020 (USD MILLION)
TABLE 83 PRINTED ELECTRONICS MARKET FOR OTHER APPLICATIONS, BY PRINTING TECHNOLOGY, 2021–2026 (USD MILLION)
TABLE 84 PRINTED ELECTRONICS MARKET FOR OTHER APPLICATIONS, BY REGION, 2017–2020 (USD MILLION)
TABLE 85 PRINTED ELECTRONICS MARKET FOR OTHER APPLICATIONS, BY REGION, 2021–2026 (USD MILLION)
11 PRINTED ELECTRONICS MARKET, BY END-USE INDUSTRY (Page No. - 161)
11.1 INTRODUCTION
FIGURE 51 PRINTED ELECTRONICS MARKET, BY END-USE INDUSTRY
FIGURE 52 AUTOMOTIVE & TRANSPORTATION TO ACCOUNT FOR LARGEST SHARE OF PRINTED ELECTRONICS MARKET IN 2021
TABLE 86 PRINTED ELECTRONICS MARKET, BY END-USE INDUSTRY, 2017–2020 (USD MILLION)
TABLE 87 PRINTED ELECTRONICS MARKET, BY END-USE INDUSTRY, 2021–2026 (USD MILLION)
11.2 AUTOMOTIVE & TRANSPORTATION
11.2.1 AUTOMOTIVE & TRANSPORTATION END-USE INDUSTRY PROJECTED TO ACCOUNT FOR LARGEST SHARE OF PRINTED ELECTRONICS MARKET FROM 2021 TO 2026
TABLE 88 PRINTED ELECTRONICS MARKET FOR AUTOMOTIVE & TRANSPORTATION, BY REGION, 2017–2020 (USD MILLION)
TABLE 89 PRINTED ELECTRONICS MARKET FOR AUTOMOTIVE & TRANSPORTATION, BY REGION, 2021–2026 (USD MILLION)
11.3 CONSUMER ELECTRONICS
11.3.1 INCREASED DEMAND FOR COMPACT ELECTRONIC DEVICES IS FUELING MARKET GROWTH
TABLE 90 PRINTED ELECTRONICS MARKET FOR CONSUMER ELECTRONICS, BY REGION, 2017–2020 (USD MILLION)
TABLE 91 PRINTED ELECTRONICS MARKET FOR CONSUMER ELECTRONICS, BY REGION, 2021–2026 (USD MILLION)
11.4 HEALTHCARE
11.4.1 SPREAD OF COVID-19 LED TO INCREASED DEMAND FOR PATIENT MONITORING SOLUTIONS AND WEARABLE DEVICES
TABLE 92 PRINTED ELECTRONICS MARKET FOR HEALTHCARE, BY REGION, 2017–2020 (USD MILLION)
TABLE 93 PRINTED ELECTRONICS MARKET FOR HEALTHCARE, BY REGION, 2021–2026 (USD MILLION)
11.5 RETAIL & PACKAGING
11.5.1 EMERGING APPLICATIONS OF PRINTED ELECTRONICS TO PROPEL MARKET GROWTH
FIGURE 53 APAC TO ACCOUNT FOR LARGEST SHARE OF PRINTED ELECTRONICS MARKET FOR RETAIL & PACKAGING IN 2021
TABLE 94 PRINTED ELECTRONICS MARKET FOR RETAIL & PACKAGING, BY REGION, 2017–2020 (USD MILLION)
TABLE 95 PRINTED ELECTRONICS MARKET FOR RETAIL & PACKAGING, BY REGION, 2021–2026 (USD MILLION)
11.6 AEROSPACE & DEFENSE
11.6.1 PRINTED ELECTRONIC DEVICES HELP REDUCE SIZE AND WEIGHT OF AEROSPACE & DEFENSE COMMUNICATION SYSTEMS
TABLE 96 PRINTED ELECTRONICS MARKET FOR AEROSPACE & DEFENSE, BY REGION, 2017–2020 (USD MILLION)
TABLE 97 PRINTED ELECTRONICS MARKET FOR AEROSPACE & DEFENSE, BY REGION, 2021–2026 (USD MILLION)
11.7 CONSTRUCTION & ARCHITECTURE
11.7.1 GROWING TREND OF SMART BUILDINGS TO FUEL MARKET GROWTH
TABLE 98 PRINTED ELECTRONICS MARKET FOR CONSTRUCTION & ARCHITECTURE, BY REGION, 2017–2020 (USD MILLION)
TABLE 99 PRINTED ELECTRONICS MARKET FOR CONSTRUCTION & ARCHITECTURE, BY REGION, 2021–2026 (USD MILLION)
11.8 OTHER END-USE INDUSTRIES
TABLE 100 PRINTED ELECTRONICS MARKET FOR OTHER END-USE INDUSTRIES, BY REGION, 2017–2020 (USD MILLION)
TABLE 101 PRINTED ELECTRONICS MARKET FOR OTHER END-USE INDUSTRIES, BY REGION, 2021–2026 (USD MILLION)
12 GEOGRAPHIC ANALYSIS (Page No. - 173)
12.1 INTRODUCTION
FIGURE 54 REGIONAL SPLIT OF PRINTED ELECTRONICS MARKET
FIGURE 55 APAC TO CAPTURE MAJOR SHARE OF PRINTED ELECTRONICS MARKET IN 2020 (USD MILLION)
TABLE 102 PRINTED ELECTRONICS MARKET, BY REGION, 2017–2020 (USD MILLION)
TABLE 103 PRINTED ELECTRONICS MARKET, BY REGION, 2021–2026 (USD MILLION)
12.2 APAC
FIGURE 56 APAC: PRINTED ELECTRONICS MARKET SNAPSHOT
TABLE 104 APAC PRINTED ELECTRONICS MARKET, BY APPLICATION, 2017–2020 (USD MILLION)
TABLE 105 APAC PRINTED ELECTRONICS MARKET, BY APPLICATION, 2021–2026 (USD MILLION)
TABLE 106 APAC PRINTED ELECTRONICS MARKET, BY END-USE INDUSTRY, 2017–2020 (USD MILLION)
TABLE 107 APAC PRINTED ELECTRONICS MARKET, BY END-USE INDUSTRY, 2021–2026 (USD MILLION)
FIGURE 57 CHINA TO CAPTURE MAJOR SHARE OF APAC PRINTED ELECTRONICS MARKET IN 2020 (USD MILLION)
TABLE 108 APAC PRINTED ELECTRONICS MARKET, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 109 APAC PRINTED ELECTRONICS MARKET, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 110 APAC PRINTED ELECTRONICS MARKET FOR SENSORS, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 111 APAC PRINTED ELECTRONICS MARKET FOR SENSORS, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 112 APAC PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 113 APAC PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 114 APAC PRINTED ELECTRONICS MARKET FOR BATTERIES, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 115 APAC PRINTED ELECTRONICS MARKET FOR BATTERIES, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 116 APAC PRINTED ELECTRONICS MARKET FOR RFID TAGS, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 117 APAC PRINTED ELECTRONICS MARKET FOR RFID TAGS, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 118 APAC PRINTED ELECTRONICS MARKET FOR LIGHTING, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 119 APAC PRINTED ELECTRONICS MARKET FOR LIGHTING, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 120 APAC PRINTED ELECTRONICS MARKET FOR PV CELLS, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 121 APAC PRINTED ELECTRONICS MARKET FOR PV CELLS, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 122 APAC PRINTED ELECTRONICS MARKET FOR OTHER APPLICATIONS, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 123 APAC PRINTED ELECTRONICS MARKET FOR OTHER APPLICATIONS, BY COUNTRY, 2021–2026 (USD MILLION)
12.2.1 CHINA
12.2.1.1 Growth in automotive and consumer electronics industry to propel demand for printed electronics
12.2.2 AUSTRALIA
12.2.2.1 Increased R&D activities into printed electronics to boost market growth in Australia
12.2.3 JAPAN
12.2.3.1 Presence of numerous printed electronics consumers is supporting market growth in Japan
12.2.4 SOUTH KOREA
12.2.4.1 Flourishing consumer electronics industry and presence of key manufacturers of printed electronics fueling market growth in South Korea
12.2.5 REST OF APAC
12.3 AMERICAS
FIGURE 58 AMERICAS: PRINTED ELECTRONICS MARKET SNAPSHOT
TABLE 124 AMERICAS PRINTED ELECTRONICS MARKET, BY APPLICATION, 2017–2020 (USD MILLION)
TABLE 125 AMERICAS PRINTED ELECTRONICS MARKET, BY APPLICATION, 2021–2026 (USD MILLION)
TABLE 126 AMERICAS PRINTED ELECTRONICS MARKET, BY END-USE INDUSTRY, 2017–2020 (USD MILLION)
TABLE 127 AMERICAS PRINTED ELECTRONICS MARKET, BY END-USE INDUSTRY, 2021–2026 (USD MILLION)
FIGURE 59 NORTH AMERICA TO CAPTURE MAJOR SHARE OF AMERICAS PRINTED ELECTRONICS MARKET IN 2020 (USD MILLION)
TABLE 128 AMERICAS PRINTED ELECTRONICS MARKET, BY REGION, 2017–2020 (USD MILLION)
TABLE 129 AMERICAS PRINTED ELECTRONICS MARKET, BY REGION, 2021–2026 (USD MILLION)
TABLE 130 AMERICAS PRINTED ELECTRONICS MARKET FOR SENSORS, BY GEOGRAPHY, 2017–2020 (USD MILLION)
TABLE 131 AMERICAS PRINTED ELECTRONICS MARKET FOR SENSORS, BY GEOGRAPHY, 2021–2026 (USD MILLION)
TABLE 132 AMERICAS PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY GEOGRAPHY, 2017–2020 (USD MILLION)
TABLE 133 AMERICAS PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY GEOGRAPHY, 2021–2026 (USD MILLION)
TABLE 134 AMERICAS PRINTED ELECTRONICS MARKET FOR BATTERIES, BY GEOGRAPHY, 2017–2020 (USD MILLION)
TABLE 135 AMERICAS PRINTED ELECTRONICS MARKET FOR BATTERIES, BY GEOGRAPHY, 2021–2026 (USD MILLION)
TABLE 136 AMERICAS PRINTED ELECTRONICS MARKET FOR RFID TAGS, BY GEOGRAPHY, 2017–2020 (USD MILLION)
TABLE 137 AMERICAS PRINTED ELECTRONICS MARKET FOR RFID TAGS, BY GEOGRAPHY, 2021–2026 (USD MILLION)
TABLE 138 AMERICAS PRINTED ELECTRONICS MARKET FOR LIGHTING, BY GEOGRAPHY, 2017–2020 (USD MILLION)
TABLE 139 AMERICAS PRINTED ELECTRONICS MARKET FOR LIGHTING, BY GEOGRAPHY, 2021–2026 (USD MILLION)
TABLE 140 AMERICAS PRINTED ELECTRONICS MARKET FOR PV CELLS, BY GEOGRAPHY, 2017–2020 (USD MILLION)
TABLE 141 AMERICAS PRINTED ELECTRONICS MARKET FOR PV CELLS, BY GEOGRAPHY, 2021–2026 (USD MILLION)
TABLE 142 AMERICAS PRINTED ELECTRONICS MARKET FOR OTHER APPLICATIONS, BY GEOGRAPHY, 2017–2020 (USD MILLION)
TABLE 143 AMERICAS PRINTED ELECTRONICS MARKET FOR OTHER APPLICATIONS, BY GEOGRAPHY, 2021–2026 (USD MILLION)
12.3.1 NORTH AMERICA
TABLE 144 NORTH AMERICA PRINTED ELECTRONICS MARKET, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 145 NORTH AMERICA PRINTED ELECTRONICS MARKET, BY COUNTRY, 2021–2026 (USD MILLION)
12.3.1.1 US
12.3.1.1.1 US to dominate printed electronics market in North America
12.3.1.2 Canada
12.3.1.2.1 Numerous initiatives taken by government and non-government institutions to support market growth in Canada
12.3.1.3 Mexico
12.3.1.3.1 Increase in automotive production and export to fuel demand for printed electronic devices
12.3.2 SOUTH AMERICA
12.3.2.1 Increasing demand for printed electronics in automotive and transportation applications creates market opportunities
12.4 EUROPE
FIGURE 60 EUROPE: PRINTED ELECTRONICS MARKET SNAPSHOT
FIGURE 61 DISPLAYS TO CAPTURE MAJOR SHARE OF EUROPE PRINTED ELECTRONICS MARKET IN 2020 (USD MILLION)
TABLE 146 EUROPE PRINTED ELECTRONICS MARKET, BY APPLICATION, 2017–2020 (USD MILLION)
TABLE 147 EUROPE PRINTED ELECTRONICS MARKET, BY APPLICATION, 2021–2026 (USD MILLION)
TABLE 148 EUROPE PRINTED ELECTRONICS MARKET, BY END-USE INDUSTRY, 2017–2020 (USD MILLION)
TABLE 149 EUROPE PRINTED ELECTRONICS MARKET, BY END-USE INDUSTRY, 2021–2026 (USD MILLION)
TABLE 150 EUROPE PRINTED ELECTRONICS MARKET, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 151 EUROPE PRINTED ELECTRONICS MARKET, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 152 EUROPE PRINTED ELECTRONICS MARKET FOR SENSORS, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 153 EUROPE PRINTED ELECTRONICS MARKET FOR SENSORS, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 154 EUROPE PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 155 EUROPE PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 156 EUROPE PRINTED ELECTRONICS MARKET FOR BATTERIES, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 157 EUROPE PRINTED ELECTRONICS MARKET FOR BATTERIES, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 158 EUROPE PRINTED ELECTRONICS MARKET FOR RFID TAGS, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 159 EUROPE PRINTED ELECTRONICS MARKET FOR RFID TAGS, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 160 EUROPE PRINTED ELECTRONICS MARKET FOR LIGHTING, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 161 EUROPE PRINTED ELECTRONICS MARKET FOR LIGHTING, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 162 EUROPE PRINTED ELECTRONICS MARKET FOR PV CELLS, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 163 EUROPE PRINTED ELECTRONICS MARKET FOR PV CELLS, BY COUNTRY, 2021–2026 (USD MILLION)
TABLE 164 EUROPE PRINTED ELECTRONICS MARKET FOR OTHER APPLICATIONS, BY COUNTRY, 2017–2020 (USD MILLION)
TABLE 165 EUROPE PRINTED ELECTRONICS MARKET FOR OTHER APPLICATIONS, BY COUNTRY, 2021–2026 (USD MILLION)
12.4.1 GERMANY
12.4.1.1 Technological innovations related to automotive industry driving market growth
12.4.2 FRANCE
12.4.2.1 Surged demand for electric vehicles in France to spur growth of printed electronics market
12.4.3 UK
12.4.3.1 Robust economy and significant funding from public and private authorized bodies are responsible for market growth
12.4.4 REST OF EUROPE
12.5 ROW
TABLE 166 ROW PRINTED ELECTRONICS MARKET, BY APPLICATION, 2017–2020 (USD MILLION)
TABLE 167 ROW PRINTED ELECTRONICS MARKET, BY APPLICATION, 2021–2026 (USD MILLION)
TABLE 168 ROW PRINTED ELECTRONICS MARKET, BY END-USE INDUSTRY, 2017–2020 (USD THOUSAND)
TABLE 169 ROW PRINTED ELECTRONICS MARKET, BY END-USE INDUSTRY, 2021–2026 (USD THOUSAND)
FIGURE 62 MIDDLE EAST TO CAPTURE MAJOR SHARE OF ROW PRINTED ELECTRONICS MARKET IN 2020 (USD MILLION)
TABLE 170 ROW PRINTED ELECTRONICS MARKET, BY REGION, 2017–2020 (USD MILLION)
TABLE 171 ROW PRINTED ELECTRONICS MARKET, BY REGION, 2021–2026 (USD MILLION)
TABLE 172 ROW PRINTED ELECTRONICS MARKET FOR SENSORS, BY REGION, 2017–2020 (USD MILLION)
TABLE 173 ROW PRINTED ELECTRONICS MARKET FOR SENSORS, BY REGION, 2021–2026 (USD MILLION)
TABLE 174 ROW PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY REGION, 2017–2020 (USD MILLION)
TABLE 175 ROW PRINTED ELECTRONICS MARKET FOR DISPLAYS, BY REGION, 2021–2026 (USD MILLION)
TABLE 176 ROW PRINTED ELECTRONICS MARKET FOR BATTERIES, BY REGION, 2017–2020 (USD THOUSAND)
TABLE 177 ROW PRINTED ELECTRONICS MARKET FOR BATTERIES, BY REGION, 2021–2026 (USD THOUSAND)
TABLE 178 ROW PRINTED ELECTRONICS MARKET FOR RFID TAGS, BY REGION, 2017–2020 (USD THOUSAND)
TABLE 179 ROW PRINTED ELECTRONICS MARKET FOR RFID TAGS, BY REGION, 2021–2026 (USD THOUSAND)
TABLE 180 ROW PRINTED ELECTRONICS MARKET FOR LIGHTING, BY REGION, 2017–2020 (USD THOUSAND)
TABLE 181 ROW PRINTED ELECTRONICS MARKET FOR LIGHTING, BY REGION, 2021–2026 (USD THOUSAND)
TABLE 182 ROW PRINTED ELECTRONICS MARKET FOR PV CELLS, BY REGION, 2017–2020 (USD THOUSAND)
TABLE 183 ROW PRINTED ELECTRONICS MARKET FOR PV CELLS, BY REGION, 2021–2026 (USD THOUSAND)
TABLE 184 ROW PRINTED ELECTRONICS MARKET FOR OTHER APPLICATIONS, BY REGION, 2017–2020 (USD MILLION)
TABLE 185 ROW PRINTED ELECTRONICS MARKET FOR OTHER APPLICATIONS, BY REGION, 2021–2026 (USD MILLION)
12.5.1 MIDDLE EAST
12.5.1.1 Increased customer awareness—ongoing trend for innovative technologies is expected to drive market growth
12.5.2 AFRICA
12.5.2.1 Increased production of electronic components and devices is expected to fuel market growth in Africa
13 COMPETITIVE LANDSCAPE (Page No. - 218)
13.1 OVERVIEW
13.2 MARKET EVALUATION FRAMEWORK
TABLE 186 OVERVIEW OF STRATEGIES DEPLOYED BY KEY PRINTED ELECTRONIC SOLUTIONS MANUFACTURING COMPANIES
13.2.1 PRODUCT PORTFOLIO
13.2.2 REGIONAL FOCUS
13.2.3 MANUFACTURING FOOTPRINT
13.2.4 ORGANIC/INORGANIC STRATEGIES
13.3 MARKET SHARE ANALYSIS, 2020
TABLE 187 PRINTED ELECTRONICS MARKET: MARKET SHARE ANALYSIS (2020)
13.4 FIVE-YEAR COMPANY REVENUE ANALYSIS
FIGURE 63 FIVE-YEAR REVENUE ANALYSIS OF THE TOP FIVE MARKET PLAYERS, 2016–2020
13.5 COMPANY EVALUATION QUADRANT
13.5.1 STARS
13.5.2 EMERGING LEADERS
13.5.3 PERVASIVE PLAYERS
13.5.4 PARTICIPANTS
FIGURE 64 PRINTED ELECTRONICS MARKET: COMPANY EVALUATION QUADRANT, 2020
13.6 START-UP/SME EVALUATION MATRIX
TABLE 188 START-UPS/SMES IN THE PRINTED ELECTRONICS MARKET
13.6.1 PROGRESSIVE COMPANIES
13.6.2 RESPONSIVE COMPANIES
13.6.3 DYNAMIC COMPANIES
13.6.4 STARTING BLOCKS
FIGURE 65 PRINTED ELECTRONICS MARKET: START-UP/SME EVALUATION MATRIX, 2020
13.7 COMPANY FOOTPRINT
TABLE 189 COMPANY FOOTPRINT
TABLE 190 COMPANY APPLICATION FOOTPRINT
TABLE 191 COMPANY END-USE INDUSTRY FOOTPRINT
TABLE 192 COMPANY REGION FOOTPRINT
13.8 COMPETITIVE SITUATIONS AND TRENDS
13.8.1 PRODUCT LAUNCHES
TABLE 193 PRODUCT LAUNCHES, JANUARY 2019–DECEMBER 2021
13.8.2 DEALS
TABLE 194 DEALS, JANUARY 2019–DECEMBER 2021
13.8.3 OTHERS
TABLE 195 EXPANSIONS, JANUARY 2019–DECEMBER 2021
14 COMPANY PROFILES (Page No. - 234)
14.1 KEY PLAYERS
(Business overview, Products/solutions offered, Recent developments, Product launches, MNM view, Key strengths/right to win, Strategic choices made, and Weaknesses and competitive threats)*
14.1.1 SAMSUNG ELECTRONICS CO., LTD.
TABLE 196 SAMSUNG ELECTRONICS CO., LTD.: BUSINESS OVERVIEW
FIGURE 66 SAMSUNG ELECTRONICS CO. LTD.: COMPANY SNAPSHOT
14.1.2 LG DISPLAY CO., LTD.
TABLE 197 LG DISPLAY CO., LTD.: BUSINESS OVERVIEW
FIGURE 67 LG DISPLAY CO., LTD.: COMPANY SNAPSHOT
14.1.3 MOLEX, LLC
TABLE 198 MOLEX, LLC: BUSINESS OVERVIEW
14.1.4 AGFA-GEVAERT GROUP
TABLE 199 AGFA-GEVAERT GROUP: BUSINESS OVERVIEW
FIGURE 68 AGFA-GEVAERT GROUP: COMPANY SNAPSHOT
14.1.5 PALO ALTO RESEARCH CENTER INCORPORATED (PARC)
TABLE 200 PALO ALTO RESEARCH CENTER INCORPORATED: BUSINESS OVERVIEW
14.1.6 NISSHA CO., LTD.
TABLE 201 NISSHA CO., LTD.: BUSINESS OVERVIEW
FIGURE 69 NISSHA CO., LTD.: COMPANY SNAPSHOT
14.1.7 DUPONT
TABLE 202 DUPONT: BUSINESS OVERVIEW
FIGURE 70 DUPONT: COMPANY SNAPSHOT
14.1.8 BASF
TABLE 203 BASF: BUSINESS OVERVIEW
FIGURE 71 BASF: COMPANY SNAPSHOT
14.1.9 NOVACENTRIX
TABLE 204 NOVACENTRIX: BUSINESS OVERVIEW
14.1.10 E INK HOLDINGS INC.
TABLE 205 E INK HOLDINGS INC.: BUSINESS OVERVIEW
FIGURE 72 E INK HOLDINGS INC.: COMPANY SNAPSHOT
14.2 OTHER KEY PLAYERS
14.2.1 YNVISIBLE INTERACTIVE INC.
14.2.2 JABIL INC.
14.2.3 OPTOMEC, INC.
14.2.4 CAMBRIDGE DISPLAY TECHNOLOGY, LTD.
14.2.5 PRINTED ELECTRONICS LIMITED
14.2.6 APPLIED INK SOLUTIONS
14.2.7 ENFUCELL
14.2.8 ENSURGE MICROPOWER ASA
14.2.9 VORBECK MATERIALS CORP.
14.2.10 T-INK, INC.
*Details on Business overview, Products/solutions offered, Recent developments, Product launches, MNM view, Key strengths/right to win, Strategic choices made, and Weaknesses and competitive threats might not be captured in case of unlisted companies.
15 APPENDIX (Page No. - 273)
15.1 DISCUSSION GUIDE
15.2 KNOWLEDGESTORE: MARKETSANDMARKETS’ SUBSCRIPTION PORTAL
15.3 AVAILABLE CUSTOMIZATIONS
15.4 RELATED REPORTS
15.5 AUTHOR DETAILS
The study involved four major activities in estimating the size of the printed electronics market. Exhaustive secondary research has been carried out to collect information on the market, the peer markets, and the parent market. Both top-down and bottom-up approaches have been employed to estimate the total market size. Market breakdown and data triangulation methods have also been used to estimate the market for segments and subsegments.
Secondary Research
In the secondary research process, various sources have been referred to for identifying and collecting information for this study on the printed electronics market. Secondary sources considered for this research study include government sources; corporate filings (such as annual reports, investor presentations, and financial statements); and trade, business, and professional associations. Secondary data has been collected and analyzed to arrive at the overall market size, which has been further validated through primary research.
Secondary research has been mainly used to obtain key information about the supply chain of the printed electronics industry to identify the key players based on their products, as well as to identify the prevailing industry trends in the printed electronics market based on printing technology, material, resolution, applications, end-use industry, and region. It also includes information about the key developments undertaken from both market- and technology-oriented perspectives.
Primary Research
Extensive primary research has been conducted after understanding and analyzing the current scenario of the printed electronics market through secondary research. Several primary interviews have been conducted with key opinion leaders from both the demand and supply sides across four major regions: Americas, Europe, APAC, and RoW. Approximately 25% of the primary interviews have been conducted with the demand side, while 75% have been conducted with the supply side. This primary data has been collected mainly through telephonic interviews, which account for 80% of the total primary interviews. Questionnaires and e-mails have also been used to collect data.
After interacting with industry experts, brief sessions were conducted with highly experienced independent consultants to reinforce the findings from our primaries. This, along with the in-house subject matter experts’ opinions, has led us to the findings as described in the remainder of this report. The breakdown of primary respondents is as follows:
To know about the assumptions considered for the study, download the pdf brochure
Market Size Estimation
The bottom-up procedure has been employed to arrive at the overall size of the printed electronics market.
- Identifying the number of printed electronics shipped at the global level
- Identifying average selling prices of global printed electronics
- Conducting multiple discussion sessions with the key opinion leaders to understand different printed electronic products and their deployment in multiple end-use industries; analyzing the break-up of the work carried out by each key company
- Verifying and crosschecking estimates at every level with key opinion leaders, including chief executive officers (CEO), directors, and operation managers, and then finally with the domain experts of MarketsandMarkets
- Studying various paid and unpaid sources of information, such as annual reports, press releases, white papers, and databases, for the company and region-specific developments undertaken in the printed electronics market
To know about the assumptions considered for the study, Request for Free Sample Report
The top-down approach has been used to estimate and validate the total size of the printed electronics market.
- Focusing initially on the top-line investments and expenditures being made in the ecosystem of printed electronics. Further splitting into technology, material, application, and end-use industry and listing key developments in key market areas
- Identifying all major players in the printed electronics market by printed electronics-based devices, materials, and their penetration in various end-use industries through secondary research and verifying with a brief discussion with industry experts
- Analyzing revenues, product mix, geographic presence, and key end-use industry for which printed electronics are served by all identified players to estimate and arrive at the percentage splits for all key segments
- Discussing these splits with the industry experts to validate the information and identifying key growth pockets across all key segments
- Breaking down the total market based on verified splits and key growth pockets across all segments
Data Triangulation
After arriving at the overall market size—using the market size estimation processes as explained above—the market has been split into several segments and subsegments. To complete the entire market engineering process and arrive at the exact statistics of each market segment and subsegment, data triangulation, and market breakdown procedures have been employed, wherever applicable. The data has been triangulated by studying various factors and trends from both the demand and supply sides in the printed electronics market.
Report Objectives
- To describe and forecast the global size of the printed electronics market, in terms of value and volume
- To describe, segment, and forecast, the printed electronics market based on printing technology, material, resolution, application, and end-use industry, in terms of value
- To describe and forecast the market for four key regions: America, Europe, the Asia Pacific (APAC), and the Rest of the World (RoW), in terms of value
- To describe different substrate transport techniques in printed electronics
- To provide detailed information regarding drivers, restraints, opportunities, and challenges influencing the growth of the printed electronics market
- To provide a detailed overview of the supply chain of the printed electronics ecosystem, along with the average selling prices of printed electronics materials
- To strategically analyze the ecosystem, tariffs and regulations, patent landscape, trade landscape, and case studies pertaining to the market under study
- To describe the detailed impact of COVID-19 on the market
- To strategically analyze micromarkets1 with regard to individual growth trends, prospects, and contributions to the overall market
- To analyze opportunities in the market for stakeholders and provide a competitive landscape of the market
- To analyze competitive developments such as product launches, expansions, partnerships, collaborations, agreements, and acquisitions in the printed electronics market
- To strategically profile the key players in the printed electronics market and comprehensively analyze their market ranking and core competencies2
Available customizations:
With the given market data, MarketsandMarkets offers customizations according to a company’s specific needs. The following customization options are available for the report:
- Detailed analysis and profiling of additional market players based on various blocks of the supply chain
Get in-depth analysis of the COVID-19 impact on the Printed Electronics Market
Benchmarking the rapid strategy shifts of the Top 100 companies in the Printed Electronics Market
Request For Special Pricing
- Triangulate with your Own Data
- Get Data as per your Format and Definition
- Gain a Deeper Dive on a Specific Application, Geography, Customer or Competitor
- Any level of Personalization
- What are the Known and Unknown Adjacencies Impacting the Printed Electronics Market
- What will your New Revenue Sources be?
- Who will be your Top Customer; what will make them switch?
- Defend your Market Share or Win Competitors
- Get a Scorecard for Target Partners
Growth opportunities and latent adjacency in Printed Electronics Market
I am interested in failure rate cause in ink printing and screen printing. I believe direct electroplating of micro/nano features is more dependable.
We are trying to analyse the investment and growth opportunities in printed electronics market. Looking for a complete market forecast and overview of printed electronics market
Printing technology is using different types of inks on target surfaces by mechanical, hydrodynamic, or electromechanical forces.We are into research and development of production technologies and are trying to design printing NFC antenna through different printers. Can you please help us in understand the different types of materials that can be used for this. Also, can you please elaborate the scope of each segment considered in this report?
Printed electronics make use of metal-based inks to manufacture electronic components. Conductive inks, especially silver conductive inks, have been widely used so far. I am trying to understand the different substrates and inks used in the printed electronics market. Does your report cover this specific interest of mine?
Presently, the printed electronics market is experiencing growth at a greater pace since several innovations related to sensors, ICs, batteries, displays, printing technologies, and printing materials are taking place. We are trying to analyze investment and growth opportunities in the printed electronics market, and hence are looking for a complete market forecast and overview of the printed electronics market.
Printed electronic devices are increasingly used across verticals such as automotive and transportation, medical, and consumer electronics. Factors such as increasing demand for thin and flexible form factors, especially for the displays of consumer electronic devices can be responsible for this growth. What is the adoption rate of printed electronics in different industries?
There have been various recent developments pertaining to the printed electronics market. Several companies have taken a keen interest in using printed electronics products. We are exploring new start up ideas and are keen to understand the printed electronics market. We would like to know the market overview for the global printed electronics market pertaining to end users, suppliers, and competitors in the market.
I am looking for overall power electronics market ecosystem and overview. Is this a part of your report.
We are exploring new start up ideas and are keen to understand printed electronics market.
I am trying to understand the different substrate and Inks used in printed electronics market. Does your covers this specific interest of mine.
I am looking for new investment option and applications pertaining to printed electronics market.
I would like to know the market overview for global printed electronics market pertaining to end users, suppliers and competitors in the market
I am interested in buying this report if it covers data around debt research. Could you please share a sample for this
We are into research and development of production technologies and are trying to design printing NFC antenna through different printers. Can you please help us in understanding different types of materials that can be used for this.
Could you elaborate on scope of each segment considered in this report