Resins and Polymers Market Research Reports & Consulting

Market Reports

• Polysilicon Market by End-use industry (Solar PV (Monocrystalline Solar Panel and Multicrystalline Solar Panel) and Electronics), and Region (Asia-Pacific, North America, Europe and Middle East & South America) - Global Forecast to 2021

  The global market size of polysilicon is estimated to reach USD 8.90 Billion by 2021 at a CAGR of 13.0%. The market is primarily driven by the rapid growth of the key end-use industries, such as solar PV and electronics. However, the price decrease and anti-dumping policies hinder the growth of the global polysilicon market.

  • Published: October 2016
  • Price: $ 4950
  • TOC Available:

• Greenhouse Film Market by Resin Type (Low Density Polyethylene, Linear Low Density Polyethylene, Ethylene Vinyl Acetate), Thickness (80<200 microns, 200 microns, >200 microns), Width Type (4.5M, 5.5 M, 7M, 9M), and Region - Global Forecast to 2021

  The global greenhouse film market is estimated to reach USD 4.70 Billion by 2021, at a CAGR of 10.96% from 2016 to 2021. The increasing demand for greenhouse cultivated crops, increasing land area under greenhouse protected farming, and the increasing focus on improving agricultural yield are driving the demand for the greenhouse film.

  • Published: October 2016
  • Price: $ 4950
  • TOC Available:

• Epoxy Resin Market by Physical Form (Liquid, Solid, and Solution), Application (Paints & Coatings, Adhesives & Sealants, Composites), End-Use Industry (Building & Construction, Aerospace, Wind Power, Marine, Consumer Goods) - Global Forecast to 2021

  The global epoxy resin market size is projected to reach USD 8.77 Billion by 2021 from the estimated USD 6.31 Billion in 2015, registering a CAGR of 5.77% between 2016 and 2021. The key drivers of the market are increasing penetration of composites, emerging demand from developing countries, and revolutionary advancements in weight reduction and safety.

  • Published: September 2016
  • Price: $ 4950
  • TOC Available:

• Electrical Insulation Materials Market by Type (Thermoplastics, Epoxy Resin, Ceramic), Application (Power Systems, Electronics Systems, Cables & Transmission Lines, Domestic Portable Appliances), and Region - Global Forecasts to 2021

  The electrical insulation materials market is projected to reach USD 9.58 Billion by 2021 at CAGR of 5.82% from 2016. The rising demand for energy has increased the electrical and power transmission and distribution (T&D) activities which has also led to the increased use of electrical insulation materials.

  • Published: September 2016
  • Price: $ 4950
  • TOC Available:

• Synthetic Rope Market by Material Type (Polypropylene, Polyester, Nylon, Polyethylene, Specialty Fibers), End-Use Industry (Marine & Fishing, Oil & Gas, Construction, Cranes, Sports & Leisure, Others), and by Region - Global Forecast to 2021

  The global market size of synthetic rope is projected to reach USD 1.69 Billion by 2021. The market is projected to witness a CAGR of 5.9%, in terms of value, during the forecast period. In this study, 2015 is considered as the base year for estimating the market size of synthetic ropes. The market size is projected for the period between 2016 and 2021. The report presents the size and the potential growth of the synthetic ropes market across different market segments categorized on the basis of material type, application, and region.

  • Published: May 2016
  • Price: $ 4950
  • TOC Available:

• Wood Plastic Composite Market by Type (Polyethylene, Polyvinylchloride, Polypropylene, Others), Application (Building & Construction Products, Automotive Components, Industrial & Consumer Goods, Others), Region (North America, Europe, Asia-Pacific, RoW) - Global Trends & Forecast to 2021

  The wood-plastic composites market is projected to reach USD 5.84 Billion by 2021, at a CAGR of 12.4% from 2016 to 2021. Based on application, the wood-plastic composites market has been segmented into building & construction products, automotive components, industrial & consumer goods, and others. Based on type, the market has been segmented into polyethylene (PE), polyvinylchloride (PVC), polypropylene (PP), and others.

  • Published: April 2016
  • Price: $ 4950
  • TOC Available:

• Natural Fiber Composites Market by Type (Wood Fiber and Non-Wood Fiber), Manufacturing Process (Compression Molding, Injection Molding, and Others), Application (Building & Construction, Automotive, and Electrical & Electronics), and Region - Global Forecasts to 2021

  The NFCs market was worth USD 3.36 Billion, in 2015, and is projected to reach USD 6.50 Billion in 2021 expected to register a CAGR of 11.68%, between 2016 and 2021. Natural fibers have become crucial in technical composite applications due to the demand for recyclable and biodegradable raw materials. In this study, 2014 has been considered as the historical year and 2015 as the base year for estimating market size of NFCs. NFCs market, according to this report, is segmented into type, manufacturing process, application, and region.

  • Published: April 2016
  • Price: $ 4950
  • TOC Available:

• Nomex Honeycomb Market by Application (Aerospace & Defense, Transportation, Sporting Goods and Others), Aerospace & Defense, Sub Application (Interior and Exterior), and by Region - Global Forecasts to 2021

  The Nomex honeycomb market is estimated to grow from USD 237.1 Million in 2015 to USD 383.3 Million by 2021, at a compound annual growth rate (CAGR) of 8.51% between 2016 and 2021. The base year considered for the study is 2015 and the market size is forecasted from 2016 to 2021. The report estimates the market size and future growth potential of Nomex honeycomb market across different segments such as application and region.

  • Published: April 2016
  • Price: $ 4950
  • TOC Available:

• Petroleum Resins Market by Type (C5, C9, Hydrogenated Hydrocarbon Resins and C5/C9 Resins), Application (Adhesive & Sealants, Printing Inks, Paints & Coatings), End-Use Industry (Building & Construction, Tire) and by Region - Global Forecast to 2021

  The global petroleum resins market is estimated to reach USD 2.58 Billion by 2021, at a CAGR of 7.7%. The market is segmented by application, such as adhesives & sealants, printing inks, paints & coatings, rubber compounding, tapes & labels, and others applications; by type that includes C5 petroleum resins, C9 petroleum resins, hydrogenated hydrocarbon resins, and C5/C9 petroleum resins; by end-use industry such as building & construction, tire industry, personal hygiene, consumer goods, automotive, and others; by region, namely, North America, Middle East & Africa, Latin America, Asia-Pacific, and Europe. The base year considered for the study is 2015, while the forecast period is between 2016 and 2021.

  • Published: April 2016
  • Price: $ 4950
  • TOC Available:

• Sports Composites Market by Resin Type, Fiber Type (Carbon, Glass, and Other Fibers), Application (Golf Stick, Rackets, Bicycle, Hockey Stick, Skis & Snowboards, and Others), & by Region - Global Forecasts to 2021

  The global sports composites market was USD 2.73 Billion in 2015, registering a CAGR of 5.59% between 2016 and 2021. In this study, 2014 has been considered as the historical year, 2015 as the base year, and 2016-2021 as forecast period for estimating the market size of composites-based sporting goods. In this research report, the market for composites-based sporting goods has been categorized based on resin type, fiber type, application, and region and forecasts revenue growth and analysis of trends on each of the submarkets.

  • Published: April 2016
  • Price: $ 4950
  • TOC Available:

• Polyurethane (PU) Microspheres Market by Applications (Encapsulation, Coatings, Adhesives, and Cosmetics) - Global Trends & Forecasts to 2020

  The global Polyurethane (PU) microspheres market is expected to reach USD 74.4 Million by 2020 from USD 47.6 Million in 2014, growing at a CAGR of 7.8% from 2015 to 2020. The base year considered for the study is 2014 and the forecast period considered is from 2015 to 2020. This report provides a detailed analysis of the PU microspheres market based on application and region.

  • Published: March 2016
  • Price: $ 4950
  • TOC Available:

• Polymethyl Methacrylate (PMMA) Microspheres Market by Application (Displays, Coatings, Cosmetics, Medical, 3D Printing Inks, and Films), & Size (0 To 30 Microns, Above 30 Microns) - Global Forecast to 2020

  The global PMMA microsphere market is projected to reach USD 191.7 Million by 2020 from USD 118.1 Million in 2014, at a CAGR of 8.5% during the period 2015 to 2020. The growth of the market is largely attributed toward the increasing demand for flat panel display, architectural coatings, and medical applications in which PMMA microspheres are majorly used.

  • Published: March 2016
  • Price: $ 4950
  • TOC Available:

• Carbon Fiber Resin Market by Resin Type (Thermoset, Thermoplastic), by Form (Prepreg, Non-Prepreg), by Application, and by Region - Global Forecast to 2021

  The carbon fiber resin market is estimated to grow from USD 292.7 Million in 2016 to USD 532.7 Million by 2021, at a compound annual growth rate (CAGR) of 12.7% from 2016 to 2021. The report aims at estimating the market size and future growth potential of the carbon fiber resin market across different segments such as application, resin type, form, and region. The base year considered for the study is 2015 and the market size is forecast from 2016 to 2021.

  • Published: March 2016
  • Price: $ 4950
  • TOC Available:

• High Performance Film Market by Material (Polyester, EVA, Polyolefin, Others), by Type (Barrier, Safety & Security, Others) by Application (Automotive, Aerospace, Electrical & electronics, Packaging, Construction), by Region - Global Trends & Forecast to 2020

  The global high-performance film (HPF) market, in terms of value, is projected to reach USD 42.25 Billion by 2020, growing at a CAGR of 7.51% from 2015 to 2020. High-growth application areas such as construction, packaging, automotive & transportation, and electrical & electronics, and extensive product launch and agreement & collaboration activities by companies are key factors driving the growth of the global HPF market.

  • Published: March 2016
  • Price: $ 4950
  • TOC Available:

• FRP Rebar Market by Resin Type, by Fiber Type, by Application (Highways, Bridges, & Buildings, Marine Structures & Waterfronts, Water Treatment Plants, and Others) - Global Forecasts to 2021

  The global market size of FRP rebar, in terms of value, is projected to reach USD 91.00 Million by 2021, at a CAGR of 11.4% between 2016 and 2021. The increasing number of patents filed for FRP rebars products & applications by global players, growing projects, continuous agreements, and expansion activities undertaken by companies are key factors for the growth of the global market for FRP rebar.

  • Published: March 2016
  • Price: $ 4950
  • TOC Available:

• Performance Fabric Market by Type (Coated Fabrics, Polyamide, Polyester, Composite Fabrics, & Aramid), Application (Water, Stain, Abrasion, Fire, U.V. Resistance & Anti-Microbial), End-Use Industry and by Region - Global Trends & Forecast to 2020

  The global performance fabric market is projected to register a CAGR of 4.8% between 2015 and 2020 to reach a market size of USD 79.55 Billion by 2020. The performance fabrics market is currently growing on account of the technological developments in performance fabrics and the increasing demand for higher functionality and comfort fabrics from end-use industries. The base year taken for estimating the market figures of 2015 in the report is 2014. This report contains forecasts for the performance fabrics market between 2015 and 2020.

  • Published: February 2016
  • Price: $ 4950
  • TOC Available:

• Ethylene Vinyl Acetate Market by Type (VLEVA, LEVA, MEVA and HEVA), by End-Use Industry (Footwear & Foam, Packaging, Agriculture, Photovoltaic Panels, Pharmaceutical, and Others), by Region - Trends & Forecasts to 2020

  The global ethylene vinyl acetate (EVA) market size, in terms of value, is projected to reach USD 9.71 Billion by 2020, at a CAGR of 3.5% between 2015 and 2020. The high potential from the packaging and footwear & foam industry, increasing global demand for EVA in solar energy sector, and continuous expansion and merger & acquisition activities undertaken by different companies are the key factors for the growth of the global EVA market.

  • Published: February 2016
  • Price: $ 4950
  • TOC Available:

• Molding Compound Market by Thermoset Resin Type (Phenolic, Epoxy, Polyester and Others), by Applications (Electricals, Aerospace, Automotive and Others), and by Region- Global Forecasts to 2020

  The global molding compounds market by thermoset resin type to grow from USD 8.04 Billion in 2015 to USD 10.96 Billion by 2020, at a compound annual growth rate (CAGR) of 6.40% between 2015 and 2020. The global molding compounds market by thermoset resin type has witnessed a strong growth in the past few years considering the high demand from the electrical application market. Thermoset molding compounds provides anti-corrosive and heat resistant properties which increase product life cycle and greater efficiency in electrical applications.

  • Published: February 2016
  • Price: $ 4950
  • TOC Available:

• Sheet Molding Compound and Bulk Molding Compound Market by Resin Type (Polyester and Others), Fiber Type (Glass Fiber and Carbon Fiber), Application (Transportation, Electrical & Electronics, Construction and Others) and Region - Global Forecasts to 2020

  The SMC and BMC market is estimated to grow from USD 2.36 Billion in 2015 to USD 3.26 Billion by 2020, at a compound annual growth rate (CAGR) of 6.69% from 2015 to 2020. The report aims at estimating the market size and future growth potential of the SMC and BMC market across different segments such as application, fiber type, resin type, and region. The base year considered for the study is 2014 and the market size is forecast from 2015 to 2020. A shift in the trend from traditional materials such as iron, aluminum, and steel toward the usage of lightweight SMC and BMC is witnessed. SMC and BMC offer properties such high strength, corrosion resistance, fire & flame resistance, good electrical insulation, and a few others resulting in increased demand of the thermoset compounds.

  • Published: February 2016
  • Price: $ 4950
  • TOC Available:

• Plastomer Market by Application (Film-Food Packaging, Film-Non-Food Packaging, Film-Stretch & Shrink Film, Automotive, Wires & Cables, Polymer Modification, Medical and Others) and Region (Asia-Pacific, North America, Europe and Row) - Global Forecast to 2020

  The markets size of plastomers is estimated to reach USD 5.33 Billion by 2020, at a CAGR of 7.4% between 2015 and 2020. The report covers the plastomers market by application (film-food packaging, film-non-food packaging, film-stretch & shrink film, automotive, wires & cables, polymer modification, medical, and others); and by region (North America, Europe, Asia-Pacific, and RoW). Base year considered for the study is 2014 while the forecast period is between 2015 and 2020.

  • Published: January 2016
  • Price: $ 4950
  • TOC Available:

• Polyphenylene Sulfide Market by Application (Automotive, Electrical & Electronics, Filter Bags, Aerospace, Industrial, Coatings, and Others) and by Region (Asia-Pacific, North America, Europe, and Row) - Global Forecast to 2020

  The global Polyphenylene Sulfide (PPS) market is estimated to reach USD 1,574.7 Million by 2020, registering a CAGR of 9.6% between 2015 and 2020. The market is driven by increasing demand for PPS in emerging markets and high demand from the automotive, electrical & electronics and filter bag application segments. PPS has unique properties, such as high temperature resistance, chemical resistance, flame retardancy, good electrical properties, and high dimensional stability, for which it is widely used in harsh fire-prone chemical environments.

  • Published: January 2016
  • Price: $ 4950
  • TOC Available:

• 3D PA (Polyamide) Market by Application (Healthcare, Aerospace & Defense, Automotive, Electronics, Others), by Type (PA11, PA12), by Region (Asia-Pacific, Europe, North America, RoW), by Scenario One and Two - Global Forecasts to 2020

  The 3D PA (polyamide) market consisting of PA11 and PA12 is projected to reach USD 48.6 Million by 2020, at a CAGR of 26.59%, by scenario one and USD 85.1 Million, at a CAGR of 41.2% from 2015 to 2020, by scenario two. The key factors responsible for this growth is its increased usage in healthcare and aerospace & defense sectors for customized products. As the market is dependent on the commercial growth of the 3D printing technology, this report has been prepared based on two scenarios where scenario one represents normal growth and scenario two represents exponential one. These scenarios are based on certain factors such as rate of adoption by end-use industries.

  • Published: January 2016
  • Price: $ 4950
  • TOC Available:

• Spandex Fiber Market by Production Process (Solution Dry Spinning, and Solution Wet Spinning), by End-Use (Textile, and Healthcare) & by Region (Asia-Pacific, North America, Europe, and RoW) - Forecast to 2020

  The spandex fiber market was valued at USD 3.57 Billion in 2014, and is expected to grow at a CAGR of 7.2% from 2015 to 2020. The base year used for study is 2014 and the forecast period is 2015 to 2020. This report provides a detailed analysis of the spandex fiber market based on end-use, production process, and region.

  • Published: January 2016
  • Price: $ 4950
  • TOC Available:

• Bioceramics and Piezoceramics Market by Material (Bio-Inert, Bio-Active, & Bio-Resorbable Ceramics, Piezo Ceramcis), by Application (Dental & Orthopedic Implants, Surgical, & Diagnostic Instrument, Implanatable Electronic Devices), by Region - Global Forecast to 2020

  Bioceramics and piezoceramics are materials which are made of alumina or hydroxyapatite, calcium phosphate, which are used in the body to replace a function like bone material or hips or knees, for instance. There are four major types of bioceramics and piezoceramics materials that are, bio-inert ceramics, bio-active ceramics, bio-resorbable ceramics, and piezoceramics. The global bioceramics and piezoceramics market is projected to be worth USD 16.3 Billion by 2020, registering a CAGR of 6.4% between 2015 and 2020. In this study, 2013 has been considered as the historical year and 2014 as the base year for estimating market size of bioceramics and piezoceramics.

  • Published: January 2016
  • Price: $ 4950
  • TOC Available:

• Cellular Concrete Market by Application (Building Material, Road Sub-bases, Concrete Pipes, Void Filling, Roof Insulation, Bridge Abutment, and others), by End-user (Residential Building, Commercial Building, Infrastructure, Others) - Global Forecasts to 2020

  The cellular concrete market size is estimated to grow from USD 337.6 Million in 2015 to reach USD 449.8 Million by 2020, at a CAGR of 5.9%. The segments considered for this report are based on end user, application, and region. The segmentation by end user consists of commercial buildings, residential buildings, and infrastructure. Based on application, the report has been segmented into building materials, road sub-bases, concrete pipes, void filling, roof insulation, and bridge abutment.

  • Published: January 2016
  • Price: $ 4950
  • TOC Available:

• Composite Decking & Railing Market by Type (Capped and Uncapped), by Resin Type (Polyethylene, Polypropylene, Polyvinylchloride, and Others), by Application (Residential and Non-Residential) & by Region Global Trends and Forecasts to 2020

  MarketsandMarkets expects the global composite decking & railing market to grow from USD 1.70 Billion in 2015 to USD 3.09 Billion by 2020, at a compound annual growth rate (CAGR) of 12.60% from 2015 to 2020. The global composite decking & railing market has witnessed a strong growth in the past few years considering the high demand of capped composites in the U.S., Germany and developing countries such as Middle East, Brazil and China. The growing construction industry in these countries is driving the composite decking & railing market.

  • Published: January 2016
  • Price: $ 4950
  • TOC Available:

• Crystalline Polyethylene Terephthalate Market by Applications (Food Packaging and Beverage Packaging); & by Region (Asia-Pacific, Europe, North America, and Rest of the World) - Global Trends & Forecasts to 2020

  The global crystalline PET market is projected to reach USD 12.16 Billion by 2020, at a CAGR of 9.0% from 2015 to 2020. The food packaging application segment is projected to account for the maximum share of the Crystalline PET market. This market has been segmented on the basis of by application and region.

  • Published: December 2015
  • Price: $ 4950
  • TOC Available:

• 3D Printing Powder Market by Type (Metal, Plastic, Ceramic), by Application (Aerospace & Defense, Automotive, Medical & Dental, Others), by Geography (North America, Europe, Asia-Pacific, RoW) - Global Forecast to 2020

  The global 3D printing powder market is projected to reach USD 636.9 Million by 2020, at a CAGR of 24.4% from 2015 to 2020. The growth of the 3D printing powder market is primarily driven by the expiry of key patents for powder-based additive manufacturing in 2014 and increasing investments in research & development of powder-based technology.

  • Published: November 2015
  • Price: $ 4950
  • TOC Available:

• Polymer Blends and Alloys Market by Type (PC, PPE/PPO-Based Blends and Alloys and Others), by Application (Automotive, Electrical & Electronics, Consumer Goods, and Others) & by Region - Global Trends and Forecasts to 2020

  The polymer blends and alloys to grow from USD 3.3 Billion in 2015 to USD 4.2 Billion by 2020, at a compound annual growth rate (CAGR) of 5.30% from 2015 to 2020. Polymer blends and alloys. The report aims at estimating the market size and future growth potential of polymer blends and alloys market across different segments such as application, types, and region. The base year considered for the study is 2014 and the market size is forecasted from 2015 to 2020. Polymer blends are replacing the traditional materials and base polymers in end user application industries, the automotive application is expected to play a key role in fueling the growth of the market in the next five years.

  • Published: November 2015
  • Price: $ 4950
  • TOC Available:

• Eco Fibers Market by Type (Organic Fibers, Recycled Fibers, Regenerated Fibers, and Others), by Application (Clothing/Textile, Household & Furnishings, Industrial, Medical, and Others), and by Region (North America, Europe, Asia-Pacific, and Rest of the World) - Global Forecast to 2020

  The global eco fibers market was worth USD 39.02 Billion in 2014, and is projected to register a CAGR of 11.46% between 2015 and 2020. In this study, 2013 has been considered as the historical year and 2014 as the base year for estimating the market size of eco fibers. Eco fibers are produced from either natural materials such as organic cotton, hemp, jute, or synthetic materials such as polyethylene, polyester, or polypropylene which are recycled to convert them into eco fibers.

  • Published: November 2015
  • Price: $ 4950
  • TOC Available:

• Barrier Materials Market by Type (PVDC, EVOH, PEN and Others), by End-Use Industry (Food & Beverage, Pharmaceutical, Cosmetic, Agriculture, and Others) - Global Forecast to 2020

  Barrier materials are categorized into varied types, such as PVDC, EVOH, and PEN, based on their functionalities. They possess inherent properties, such as high durability, strong impact and thermal, and chemical resistances. Barrier Materials: The global barrier materials market was valued at USD 1.74 Billion in 2014 and is expected to reach USD 2.64 Billion by 2020, at a CAGR of 7.26%, between 2015 and 2020

  • Published: November 2015
  • Price: $ 4950
  • TOC Available:

• Cold Insulation Market by Material (Fiber Glass, Phenolic Foams, Polystyrene Foams, Polyurethane Foams, and Others), by End-Use Industry (Chemicals, HVAC, Oil & Gas, Refrigeration, and Others) - Trends & Forecasts to 2020

  The cold insulation market size is projected to reach USD 5.7 Billion by 2020, at a CAGR of 7.8% during the forecast period. A material or combinations of two or more materials that can be used to prevent heat loss or heat gain to conserve the valuable energy are known as insulation materials. Depending on various applications, these materials can be manufactured in any size and shape. Insulation is the most cost-effective measure to combat climate change. Insulating materials have the ability to protect the environment from harmful greenhouse gases.

  • Published: November 2015
  • Price: $ 4950
  • TOC Available:

• Textile Composites Market by Fiber Type (Carbon, Glass, Aramid and Others), by Textile Type (Woven, Non-Woven), by Application (Electrical & Electronics, Wind, Sporting Goods, Marine, Construction and Others) & by Region - Global Forecast to 2020

  The textile composite material market is estimated at USD 4,770.0 Million in 2015 and is projected to reach USD 6,597.0 Million by 2020, at a CAGR of 6.7%, between 2015 and 2020. Since the last thirty to forty years, the usages of textiles composite in applications have increased steadily, penetrating, and conquering new markets, constantly. The importance of textiles composite has already been proven being light-weight materials with high strength & stiffness properties, the current challenge is to make them cost effective.

  • Published: October 2015
  • Price: $ 4950
  • TOC Available:

• Composite Resin Market by Resin Type (Thermoset and Thermoplastic), by Manufacturing Process (Layup, Injection Molding, Filament Winding, Pultrusion, Compression Molding, RTM, and Others), by Application & by Region - Global Forecasts to 2020

  The global composite resin market size by end-use applications, in terms of value, was USD 9,317.4 Million in 2014 and is projected to grow at a CAGR of 5.6% between 2015 and 2020. The use of composite resin in Construction & Infrastructure, Transportation, Electricals & Electronics, Pipes & Tanks, Wind Energy, Marine, Aerospace & Defense applications has increased steadily. Apart from its traditional use in construction & infrastructure, transportation, electricals & electronics, wind energy, pipes & tanks, marine, aerospace & defense, composite resin has established a significant position in sophisticated niche applications such as healthcare and sporting goods.

  • Published: October 2015
  • Price: $ 4950
  • TOC Available:

• Asia-Pacific Geomembranes Market by Material Type, by Technology, by Application (Waste Management, Water Management, Mining, Tunnel Liners, Coal Ash Containment, Salt Farming, and Others), and by Country - Trends & Forecast to 2020

  Geomembrane is an impermeable membrane liner or barrier used to block the movement of water, fluids, or other materials of soluble nature in man-made structures. Geomembranes are primarily manufactured from polyethylene and have use in the containment of liquid, solid waste management, mining, and other applications. The Asia-Pacific geomembranes market is projected to grow from more than USD 500 Million in 2015 to USD 1,000 Million by 2020, at a CAGR of 15.0% between 2015 and 2020.

  • Published: October 2015
  • Price: $ 4950
  • TOC Available:

• Liquid Crystal Polymer Market by Application (Electrical & Electronics, Consumer Goods, Lightning, Automotive, Medical & Others) and by Brands (Laperos LCP, Vectra/Zenite, Sumikasuper, Xydar, Siveras & Others) - Global Forecasts to 2020

  LCPs are partially crystalline aromatic polyesters based on p-hydroxybenzoic acid and related monomers. LCPs form areas of highly ordered structures when in the liquid phase but the degree of order is less than that of a regular solid crystal. LCPs have excellent properties such as they are fire resistant at high temperatures and chemically resistant in very thin walled applications. Therefore, LCPs hold immense potential for a variety of applications which depend on an optical or a mechanical response to external stimuli. The LCPs market is projected to register a CAGR of 6.0% between 2015 and 2020 to reach USD 1.2 Billion, by 2020.

  • Published: October 2015
  • Price: $ 4950
  • TOC Available:

• Chemical Protective Clothing Market by Type (Aramid & Blends, PBI, Polyamide, Cotton Fibers, Laminated Polyester, Polyolefin & Blends, UHMW Polyethylene, and Others), End-Use Industry (Construction & Manufacturing, Oil & Gas, Healthcare/Medical, Firefighting & Law Enforcement, Mining, Military, and Others), & by User Type (Industrial, and Personal) - Global Forecast to 2020

  The global chemical protective clothing market is projected to reach USD 1.29 Billion by 2020, registering a CAGR of 5.8% between 2015 and 2020. Rapid industrialization and increasing safety concerns against risky working environment is a key driver of the chemical protective clothing market. The construction & manufacturing industry consumed more than 32% of chemical protective clothing in 2014. In addition, the increasing stringent government requirements in the developed regions are expected to drive the increasing demand for chemical protective clothing during the forecast period.

  • Published: October 2015
  • Price: $ 4950
  • TOC Available:

• Cellulose Fiber Market by Fiber Type [Natural Cellulose Fibers (Cotton, Jute & Others), Man-Made Cellulose Fibers (Viscose, Lyocell, Modal & Others), by Application (Apparel, Home Textile, Industrial, and Others) & by Region - Trends & Forecast to 2020

  The global demand for cellulose fiber is expected to reach USD 36,968.8 Million by 2020. Asia-Pacific is the biggest market, in terms of value, in the global cellulose fiber market. Increasing population and improving standard of living is driving the demand of textile in this region. Natural and man-made cellulose fibers are widely used for manufacturing of textile. Apparel and home textile are the major applications that are expected to driving the growth of cellulose fiber market in the Asia-Pacific region in coming years.

  • Published: September 2015
  • Price: $ 4950
  • TOC Available:

• Patterning Material Market by Type (193 NM Immersion Resist, Positive 193 NM Dry Resist, Positive 248 NM Resist, I-Line and G-Line Resist, and Others), by Application (Automotive Sensors, DRAM, Glass Printed Circuit Boards, MEMS & NEMS Devices, and Others) - Regional Forecasts to 2020

  Patterning materials or photoresists are light sensitive materials used in the photolithography (device patterning process) processes to form patterned coating on a surface for wafers, usually silicon wafers, used in the electronics & semiconductors. The total market size for patterning materials is projected to reach USD 3,862.44 Million by 2020 from USD 2,750.00 Million in 2014, at a CAGR of 5.85% between 2015 and 2020.

  • Published: September 2015
  • Price: $ 4950
  • TOC Available:

• Polystyrene Market by Application (Packaging, Electronics, Consumer Goods & Appliances, Construction, and Others) & Geography - Global Trends & Forecast to 2019

  Polystyrene is a hard and solid plastic, which is produced through the polymerization of styrene. It is a vinyl polymer, with a long hydrocarbon chain structure, wherein a phenyl group is attached to every other carbon atom. Polystyrene is a versatile plastic that is mainly utilized in refrigerators, air conditioners, instrument panels, televisions, computers, and disposable utensils (such as foamed cups, plates, and bowls). It is also used to develop consumer products, such as CD and DVD cases and food packaging materials. It is an inexpensive and strong plastic that can be used to insulate buildings, create sterile disposable cutlery, and can also be recycled into domestic building products. The global polystyrene market is projected to reach USD 28.2 Billion by 2019, at a CAGR of 5.1% between 2014 and 2019.

  • Published: August 2015
  • Price: $ 4950
  • TOC Available:

• Pultrusion Market by type (Glass Fiber, Carbon Fiber and others), by Resin Type (Polyester, Vinyl Ester, Polyurethane and Others) by Application (Industrial, Housing, Civil Engineering, Consumers and others) and by Region - Global Trends and Forecasts to 2020

  Pultruded parts have applications across varied industry verticals, housing sectors, civil engineering, consumer and others. The industrial application segment is anticipated to be the leading application of the pultrusion market. The global pultrusion market is estimated at USD 1,619.5 Million in 2015 and is projected to reach USD 2,045.2 Million by 2020, at a CAGR of 4.8% from 2015 to 2020.

  • Published: August 2015
  • Price: $ 4950
  • TOC Available:

• Polyethylene Terephthalate - PET Resin & Polybutylene Terephthalate - PBT Resin Market by PET Application (Bottles, Films, Food Packaging & Others), by PBT Application (Automotive, Electrical and Electronics, Consumer Appliance, & Others) – Global Trends & Forecast to 2019

  PET & PBT resin market,along with its end products, has witnessed a significant growth in the past few years and is estimated to grow in the coming years. The increasing demand for lightweight and packaged food will be the key influencing factors for the PET resin market, with an increased emphasis on different applications. The replacement of metal by PBT structures is the driving factor for PBT resin market

  • Published: May 2014
  • Price: $ 4950
  • TOC Available:

• Polyvinylidene Fluoride - PVDF Market by End User Industry (Chemical Processing, Construction, New Energies, and Oil & Gas), & by Application (Pipes, Coatings, Fittings, Sheets, Films, Tubes, Powder, Membranes, & Cables) - Trends Forecasts to 2019

  The global PVDF market, along with its end products, has witnessed a linear growth in the past few years and this growth is estimated to increase in the coming years. The high purity, chemical inertness to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, and an upsurge in the demand in coatings, Lithium-ion batteries, flexible flow lines and photovoltaic films will be the key influencing factors for the global PVDF market with the increased emphasis on its different applications and their end-users.

  • Published: May 2014
  • Price: $ 4950
  • TOC Available:

• Adipic Acid Market by Application (Polyamide 66, Polyurethane, Adipic Esters, & Others), by Material Type (Engineering Plastics & Fibers) & by Geography (North America, Europe, Asia-Pacific, & ROW) - Global Trends & Forecast to 2019

  The adipic acid market, along with its end products, has witnessed a linear growth in the past few years. This growth is estimated to increase in the coming years. The quality, durability, lightweight nature, excellent energy absorbing property, an upsurge in the demand for durable polyamide 66, and the upcoming safety regulations & innovative techniques for its use will be the key influencing factors for the global adipic acid market with the increased emphasis on its different types and applications.

  • Published: April 2014
  • Price: $ 4950
  • TOC Available:

• Semiconductor & IC Packaging Materials Market by Types (Organic Substrates, Bonding Wires, Leadframes, Ceramic Packages, & so on), Packaging Technologies (SOP, GA, QFN, DFN, & Others), & Geography - Regional Trends & Forecast to 2019

  Semiconductor & IC packaging materials are known to protect the electronic components such as semiconductors and ICs from external impact, corrosion, and so on. These packaging materials are used along with various advanced packaging technologies for the packaging of semiconductors and integrated circuits.

  • Published: April 2014
  • Price: $ 4950
  • TOC Available:

• Bio-Polyamide, Specialty Polyamide & Precursors Market by Type (PA 6, PA 66, PA 10, PA 11, PA 12 & Others), by Precursor (CPL, ADA & HDMA), by Material (Fiber & Plastics) & Application (Textile, Automotive, E&E & Others) - Global Trends & Forecasts to 2019

  The global bio-polyamide market, along with its end products, has witnessed a linear growth in the past few years and this growth is estimated to increase in the coming years. The quality, durability, lightweight nature & excellent energy absorbing property, an upsurge in the demand for durable polyamide; and the upcoming safety regulations & innovative techniques for its use will be the key influencing factors for the global polyamide market with the increased emphasis on its different types and their applications.

  • Published: March 2014
  • Price: $ 4950
  • TOC Available:

• Thin Film Material Market By Type (CdTe, CIGS, a-Si, Others), End-User Industry [Photovoltaic Solar Cells, MEMS, Semiconductors and Electrical (Circuit Boards), Optical Coating, Others], and Deposition Processes – Global Trends & Forecast to 2018

  The thin film material market is expected to grow at a healthy CAGR over the next five years to reach $10,250 million, by 2018. Europe dominates the thin film material market due to high usage of thin film material in its various end-user industries. Although the European economy has still not recovered from the Euro crisis, it will continue to lead this market, followed by North America and Asia-Pacific.

  • Published: March 2014
  • Price: $ 4950
  • TOC Available:

• Amino Resin Market - by Types (Urea Formaldehyde, Melamine Formaldehyde, Melamine Urea Formaldehyde), Applications (Particle Board, MDF, Plywood, Laminates, Coatings) & Geography – Global Trends & Forecasts to 2018

  Amino resins are thermosetting resins formed by copolymerization of amino compounds with an aldehyde. Amino resins are used in wood panels, coatings, laminates, molding compounds, adhesives, and other industry.Amino resins are majorly used as adhesives in wood panels such as particleboards, MDF, plywood, etc. The high performance of amino resins in terms of strength and resistance they provide to wood panels are major driver of amino resin market.

  • Published: April 2013
  • Price: $ 4950
  • TOC Available:

• First
• Previous
• 4
• 5
• 6
• 7
• 8
• Next
• Last