Here are relevant reports on : heat-moisture-exchanger-market
-
Geothermal Heat Pumps Market - By Capacity & Applications - (2011-2018)
- Published: March 2026
- Price: $ 4950
- TOC Available:
-
Metal Heat Treating Market – by Services, Equipment, Application and Geography, Trends and Forecast To 2018
Metal Heat treating is a method used to alter the physical, and sometimes chemical, properties of a material. Most metal components require thermal processing to alter their physical and metallurgical properties in order to meet the engineered requirements of their intended use.
- Published: March 2026
- Price: $ 4950
- TOC Available:
-
Global Geothermal Power and Heat Pump Market Outlook: (2010-2015)
Geothermal energy is a renewable source of energy derived from the earth’s crust. The heat available underneath is called as geothermal heat, which is utilized to generate power by drilling wells and employing various technologies such as dry steam, flash steam, and binary cycle. Another major utilization of geothermal heat is its direct use in space heating, aquaculture, horticulture, swimming pools, and spa treatments. These two applications form the geothermal energy industry and are the focus areas of interest in the report.
- Published: March 2026
- Price: $ 4950
- TOC Available:
-
Thermal & Heat Resistant Coating Market - By Type, Application & Geography - 2018
- Published: March 2026
- Price: $ 4950
- TOC Available:
-
Remote Microgrids Market - By Technology (Diesel Generators, Combined Heat and Power, Renewable energy) - (2011-2018)
- Published: March 2026
- Price: $ 4950
- TOC Available:
-
Metal Heat Treatment Market - By Type, Application & Geography - 2018
- Published: March 2026
- Price: $ 4950
- TOC Available:
-
One Component Adhesive Market by Type (Anaerobic, Cyanoacylates, Heat Cure, Moisture Cure, Radiation Cure and Silicones), by Application (Glass Industry, Micro Electronics and Optics, Automotive Industry, Metal Fabrication and Aerospace Industry), and by Region - Trends & Forecasts to 2020
One component adhesives can be defined where adhesive components are premixed in their final proportions where the chemical conditions are blocked. This chemical condition gets activated on the specific condition. This requires either high temperature or substances or media (light, humidity) from the surroundings to initiate the curative mechanism. The containers in which this type of adhesive are transported or stored must be carefully chosen to prevent any undesired reactions. These adhesives are usually 100% solid systems. Single component adhesives are classified as Anaerobic, Cyanoacrylates, Heat Cure, Moisture cure, Radiation Cure and Silicones. Cyanoacrylates were the world’s first single-component instant adhesives with significant bonding capacity that could bond almost everything, including the skin on a user’s fingers.
- Published: March 2026
- Price: $ 4950
- TOC Available:
-
Fuel Cells Market for Military, Aviation and Space by Platform (Airborne, Ground and Space), By End Use (Military & Commercial), System (Compressor, Heat Exchanger, Pumps, Controller), Type (PEMFC, PAFC, MCFC & SOFC), Application (Stationary, Portable, & Transportation) and Region - Global Forecast to 2023
The study involved 4 major activities in estimating the current market size of the global fuel cells market for military, aviation and space. Exhaustive secondary research was carried out to collect information on the market, its peer markets, and its parent market. The next step was to validate these findings, assumptions, and sizing with the industry experts across the value chain of the global fuel cells market for military, aviation and space through primary research. Both, top-down and bottom-up approaches were employed to estimate the complete market size. These were followed by the market breakdown and data triangulation procedures to estimate the size of various segments and subsegments of the market.
- Published: March 2026
- Price: $ 4950
- TOC Available:
-
Data Center Solutions Market by Infrastructure (IT (Server, Storage, Network), Power (Generator, UPS, Switchgear, PDU, Switchboard), Cooling (CRAC & CRAH, Chiller, Heat Exchanger, CDU)), Rack (Enclosed, Open Frame), Software (DCIM, BMS) - Forecast to 2030
The global data center solutions market is expanding rapidly, with a projected market size anticipated to rise from about USD 448.95 billion in 2025 to USD 1,105.28 billion by 2030, featuring a CAGR of 19.7%. The major players in the data center solutions market include Dell Technologies (US), Broadcom (US), Nvidia (US), HPE (US), Supermicro Computer Inc. (US), Lenovo (China), Schneider Electric (France), Huawei (China), IBM (US), and Cisco (US).
- Published: July 2025
- Price: $ 4950
- TOC Available:
-
Asia Pacific Heat Exchanger Market by Material (Metals, Alloys, Brazing Clad Materials), Type (Shell & Tube, Plate & Frame, Air-cooled), End-Use Industry (Chemical, Energy, HVACR, Food & Beverage, Power, Pulp & Paper), and Countries - Forecast to 2030
The Asia Pacific heat exchanger market is projected to reach USD 9.37 billion in 2030 from USD 6.26 billion in 2025, at a CAGR of 8.4% during the forecast period. The Key Players ALFA LAVAL (Sweden), Kelvion Holding GmbH (Germany), Danfoss (Denmark), Exchanger Industries Limited (Canada), Mersen (France), API Heat Transfer (US), Johnson Controls (Ireland), Xylem (US), Wabtec Corporation (US), SPX FLOW (US), LU-VE S.p.A. (Italy), Modine Manufacturing Company (US), and Wieland (Germany), among others.
- Published: March 2026
- Price: $ 4950
- TOC Available:
Records 21 to 30 of 50
