Coatings Adhesives Sealants and Elastomers Market Research Reports & Consulting

Market Reports

• Decorative Coatings Market by Resin Type (Acrylic, Alkyd), Technology (Waterborne, Solventborne, Powder), User Type (DIY, Professional), Coating Type (Interior, Exterior), Application (Residential, Non-Residential), and Region - Global Forecast to 2024

  The Decorative Coatings Market is expected to grow from USD 67.0 billion in 2019 to USD 82.4 billion by 2024, at a CAGR of 4.2% during the forecast period. Key players profiled in the decorative paints & coatings market report include The Sherwin-Williams Company (US), PPG Industries, Inc. (US), Akzo Nobel N.V. (Netherlands), Kansai Paints Co., Ltd. (Japan), Asian Paints Limited (India), and Nippon Paint Holdings Co., Ltd. (Japan).

  • Published: January 2020
  • Price: $ 5650
  • TOC Available:

• Waterborne Coatings Market by Resin Type (Acrylic, Polyester, Alkyd, Epoxy, Polyurethane, PTFE, PVDF, PVDC), Application (Architectural and Industrial), Region (APAC, North America, Europe, Middle East & Africa, South America) - Global Forecast to 2024

  The waterborne coatings market is expected to grow from USD 74.1 billion in 2019 to USD 91.8 billion by 2024, at a compound annual growth rate (CAGR) of 4.4%, during the forecast period.BASF SE (Germany), AkzoNobel N.V. (Netherlands), PPG Industries Inc. (US), RPM International Inc. (US), The Sherwin-Williams Company (US), Asian Paints Limited (India), Axalta Coating Systems LLC (US), Nippon Paint Holdings Co. Ltd. (Japan), Kansai Paint Co. Ltd. (Japan), Jotun Group (Norway), and Tikkurila OYJ (Finland) are some of the players operating in the global waterborne coatings market.

  • Published: January 2020
  • Price: $ 5650
  • TOC Available:

• White Spirit Market by Type (Type 0, Type 1, Type 2, Type 3), Flash Point, Application (Thinner & Solvent, Fuels, Cleaning Agent, Degreasing Agent), Region (North America, Europe, APAC, Middle East & Africa, South America ) - Global Forecast to 2024

  The white spirit market is expected to grow from USD 6.7 billion in 2019 to USD 8.1 billion by 2024, at a compound annual growth rate (CAGR) of 4.0%, during the forecast period.Royal Dutch Shell (The Netherlands), Total S.A (France), ExxonMobil (US), Idemitsu Kosan Co. Ltd (Japan), Bharat Petroleum Corporation Limited (India), Indian Oil Corporation Limited (India), and ThaiOil Company (Japan).

  • Published: December 2019
  • Price: $ 5650
  • TOC Available:

• Polyurethane Adhesives Market by Resin Type (Thermoset & Thermoplastic), Technology (Solvent-borne, 100% solids, Dispersion), End-use Industry (Automotive, Construction, Packaging, Footwear, Industrial, and Furniture), Region - Global Forecast to 2024

  The PU adhesives market is expected to grow from USD 7.0 billion in 2019 to USD 9.1 billion by 2024, at a compound annual growth rate (CAGR) of 5.6%, during the forecast period. Major players operating in the PU adhesives include Henkel AG & CO. KGAA (Germany), H.B. Fuller Company (US), 3M Company (US), Arkema S.A. (France), and Sika AG (Switzerland).

  • Published: November 2019
  • Price: $ 5650
  • TOC Available:

• Bioadhesives Market by Type (Plant Based, Animal Based), Application (Paper & Packaging, Construction, Woodworking, Personal care, Medical), Region (APAC, North America, Europe, Middle East & Africa, South America) - Global Forecasts to 2024

  The Bioadhesives Market is expected to grow from USD 5.6 billion in 2019 to USD 9.1 billion by 2024, at a CAGR of 10.0% during the forecast period. Major players operating in the global bioadhesive market include Henkel AG (Germany), DuPont de Nemours, Inc., (US), Ashland Global Holdings Inc. (US), EcoSynthetix (Canada), Arkema S.A. (France), DaniMer Scientific LLC (US), Tate & Lyle PLC (UK), L.D. Davis Industries, Inc., (US), and Ingredion Incorporated (US).

  • Published: November 2019
  • Price: $ 5650
  • TOC Available:

• Road Marking Materials Market by Type (Performance-Based Markings And Paint-Based Markings), Application (Road & Highway Marking, Parking Lot Marking, Factory Marking, Airport Marking, Antiskid Marking), and Region - Global Forecast to 2023

  The road marking materials market size is projected to grow from USD 6.8 billion in 2018 to USD 8.8 billion by 2023, at a CAGR of 5.2%. Road markings are aids to control traffic by providing information to commuters. These are traffic signs to provide awareness to motorist or pedestrians. Various countries have introduced road safety laws and standards to ensure safety and security for the people, as well as road infrastructure.Sherwin-Williams Company (US), Ennis-Flint, Inc. (US), SWARCO AG (Austria), Geveko Markings (Denmark), SealMaster (US), 3M (US), Aximum (France), Rembrandtin Lack GmbH Nfg. KG (Austria), Crown Technology, LLC (US), and Ozark Materials LLC (US).

  • Published: November 2019
  • Price: $ 5650
  • TOC Available:

• Polybutadiene Market by Type (Solid Polybutadiene (High Cis, Low Cis, High Trans, High Vinyl), Liquid Polybutadiene), Application (Tires, Polymer modification, Industrial rubber, Chemical), and Region - Global Forecast to 2024

  The global polybutadiene market size is expected to be grow USD 13.8 billion by 2024, at a CAGR of 5.1% during the forecast period. ARALNXEO (Netherlands), UBE Industries Ltd (Japan), JSR Corporation (Japan), Kumho Petrochemical Co. Ltd (South Korea), Reliance Industries Ltd. (India), SABIC (Saudi Arabia), LG Chem Ltd (South Korea), Versalis SPA (Italy), PJSC SIBUR Holdings (Russia), Sinopec (China), and Kuraray Co. Ltd (Japan) are some of the major manufacturers of the polybutadiene market. The study includes in-depth competitive analysis of these key players in the polybutadiene market, with their company profiles, recent developments, and key market strategies.

  • Published: October 2019
  • Price: $ 5650
  • TOC Available:

• Insulation Coating Materials Market by Type (Acrylic, Epoxy, Polyurethane, YSZ, and Mullite), End-Use Industry (Aerospace, Automotive, Marine, Industrial, Building & Construction), and Region - Global Forecast to 2023

  The market for insulation coating materials is projected to grow from USD 8.7 billion in 2018 to USD 12.5 billion by 2023, at a CAGR of 7.5% during the forecast period. Insulation coatings prevent the transfer of heat or sound from one surface area to another. These coatings help save energy. Insulation coatings are used in building & construction, industrial, aerospace, marine, automotive, and other industries. The leading players in the insulation coating materials market are AkzoNobel (Netherlands), PPG Industries (US), The Sherwin-Williams Company (US), Kansai Paint CO., LTD. (Japan), Jotun Group (Norway), Nippon Paint (Japan), and Mascoat (US).

  • Published: October 2019
  • Price: $ 5650
  • TOC Available:

• Coating Equipment Market by Type (Liquid Coating, Powder Coating, and Specialty Coating), End-use Industry (Automotive & Transportation, Aerospace, Industrial, Building & Infrastructure), and Region - Global Forecast to 2023

  The market size for coating equipment is projected to grow from USD 20.4 billion in 2018 to more than 27.7 billion by 2023, at a CAGR of 6.3%. Increasing demand from end-use industries and the need for replacement of existing coating systems are the driving factor for the coating equipment market.The leading players in the coating equipment market are Nordson Corp (US), IHI Corp (Japan), OC Oerlikon (Switzerland), SATA (Germany), Graco (US), ANEST IWATA (JAPAN), ASAHI Sunac Corp. (Japan), J. Wagner (Germany), Carlisle Companies (US), and WIWA Wilhelm Wagner (Germany).

  • Published: October 2019
  • Price: $ 5650
  • TOC Available:

• Methyl Methacrylate Adhesives Market by Substrate (Metal, Plastic, Composite), End Use Industry (Automotive & Transportation, Marine, Wind Energy, Building & Construction, General Assembly), and Region - Global Forecast to 2023

  The market size of MMA adhesives is estimated at USD 1.09 billion in 2018 and is projected to reach USD 1.56 billion by 2023, at a CAGR of 7.5%. The high demand from the automotive & transportation industry in emerging countries is leading to the increasing consumption of MMA adhesives.The key players profiled in this report include Illinois Tool Works Inc. (US), Arkema (France), SCIGRIP (UK), Scott Bader (UK), Lord Corporation (US), Henkel (Germany), Permabond LLC (US), Parsons Adhesive Inc. (US), Huntsman Corporation (US), and 3M (US).

  • Published: October 2019
  • Price: $ 5650
  • TOC Available:

• Thermal Spray Coatings Market by Material (Ceramics. Metals & Alloys), Process (Combustion Flame & Electrical), End-use Industry (Aerospace, Healthcare, Automotive, Energy & Power, Electronics), Region - Global Forecast to 2023

  The global thermal spray coatings market is estimated to be USD 9.9 billion in 2018 and is projected to reach USD 13.7 billion by 2023, at a CAGR of 6.7% from 2018 to 2023. The growth of aerospace, automotive, and healthcare industries is expected to drive the thermal spray coatings market. Praxair Surface Technologies, Inc (US), BodyCote (UK), Oerlikon Metco (Switzerland), Surface Technology (UK), H.C Starck GmbH (Germany), F.W. Gartner Thermal Spraying (US), Arc Spray (Pty) Ltd (South Africa), Metallisation Limited (UK), Plasma-Tec, Inc. (US), C&M Technologies GmbH (Germany), AMETEK Inc. (US), Flame Spray SpA (Italy), BryCoat Inc. (US), Thermal Spray Technologies, Inc. (tst) (US) are the key players operating in the thermal spray coatings market.

  • Published: October 2019
  • Price: $ 5650
  • TOC Available:

• Laminating Adhesives Market by Technology (Solvent-based, Solventless, and Water-based), Resin (Polyurethane and Acrylic), End-Use Industry (Packaging, Industrial, and Automotive & Transportation), and Region - Global Forecast to 2024

  The Laminating Adhesives Market is expected to grow from USD 2.6 billion in 2019 to USD 3.6 billion by 2024, at a CAGR of 6.9% during the forecast period. Major players operating in the laminating adhesives market include Henkel (Germany), H.B. Fuller (US), DowDupont (US), and Arkema (Bostik) (France).

  • Published: October 2019
  • Price: $ 5650
  • TOC Available:

• Conductive Ink Market by Type (Silver, Copper, Carbon/Graphene, Carbon Nanotube, Conductive Polymer), Application (Photovoltaics, RFID, PCB, Membrane Switches, Displays, Bio-Sensors, Thermal Heating), Region - Global Forecast to 2024

  The conductive ink market size is projected to grow from USD 3.3 billion in 2019 to USD 4.0 billion by 2024, at a CAGR of 4.0%. The growth of the conductive inks market can be attributed to the increasing usage of conductive inks in the electronic industry. Some of the key players operating in the conductive inks market are DowDuPont (US), Henkel AG & Co. KGaA (Germany), Heraeus Holding GmbH (Germany), Johnson Matthey (UK), Poly-Ink (France), Sun Chemical Corporation (US), NovaCentrix (US), Creative Materials Inc. (US), Applied Ink Solutions (US), and Vorbeck Materials (US). Competition among these players is high, and they mostly compete with each other on prices and quality of their products and product customization. The growth of the end-use segments of the conductive inks market is likely to encourage the manufactures to provide better products and technologies to their customers and explore the untapped markets.

  • Published: October 2019
  • Price: $ 5650
  • TOC Available:

• Electric Vehicle Adhesives Market by Resin Type (Epoxy, Polyurethane, Silicone, Acrylic), Application (Exterior, Interior, Powertrain), Form (Liquid, Film & Tape), Substrate (Polymer, Composite, Metals), and Region - Global Forecast to 2024

  The EV adhesive market size is expected to growUSD 2,158 million by 2024, at a CAGR of 57.0% between 2019 and 2024 during the forecasting period. The major players in this market are Henkel (Germany), H.B. Fuller (US), Sika AG (Switzerland), 3M (US), Wacker Chemie AG (Germany), Bostik SA – An Arkema company (France), L&L Products (US), Jowat SE (Germany), Ashland (US), PPG Industries, (US) and Permabond (UK).

  • Published: October 2019
  • Price: $ 5650
  • TOC Available:

• Adhesive Tapes Market by Resin Type (Acrylic, rubber, silicone), Technology (Solvent, Water and Hot-Melt-Based), Substrate (PP, Paper, PVC), Application (Packaging, Healthcare, Electrical & Electronics, Automotive), and Region-Global Forecast to 2022

  The adhesives tapes market is estimated to be USD 51.25 Billion in 2017 and is projected to reach USD 69.42 Billion by 2022, at a CAGR of 6.26% from 2017 to 2022. The increasing use of adhesives tapes in various applications, such as packaging, healthcare, electrical & electronics, building & construction, white goods, and automotive is driving the growth of the adhesives tapes market.Key players operating in the adhesives tapes markets include 3M Company (US), Nitto Denko Corporation (Japan), Tesa SE (Germany), Lintec Corporation (Japan), Intertape Polymer Group, Inc. (Canada), Avery Dennison Corporation (US), Shurtape Technologies, LLC (US), and Scapa Group Plc (UK).

  • Published: October 2019
  • Price: $ 5650
  • TOC Available:

• Adhesives & Sealants Market by Adhesive Formulating Technology (Water-Based, Solvent-Based, Hot-Melt, Reactive), Sealant Resin Type (Silicone, Polyurethane, Plastisol, Emulsion, Butyl, Polysulfide), Application, Region - Global Forecast to 2024

  The adhesives & sealants market is expected to grow from USD 58.9 billion in 2019 to USD 73.8 billion by 2024, at a compound annual growth rate (CAGR) of 4.6%, during the forecast period.Major players in the adhesives & sealants market include Henkel (Germany), H.B. Fuller (US), Sika (Switzerland), Arkema (France), Huntsman Corporation (US), 3M Company (US), Illinois Tool Works Inc. (US), Avery Dennison Corporation (US), DowDuPont Inc. (US), and Wacker Chemie Ag (Germany).

  • Published: September 2019
  • Price: $ 5650
  • TOC Available:

• Aerospace Tapes Market by Resin Type (Acrylic, Rubber, Silicone), Backing Material (Paper/Tissue, Film, Foam), End-use Industry (Commercial Aviation, Military Aviation, General Aviation), and Region - Global Forecast to 2024

  The aerospace tapes market is expected to grow from USD 2.0 billion in 2019 to USD 2.4 billion by 2024, at a compound annual growth rate (CAGR) of 4.0%, during the forecast period.Major players operating in the aerospace tapes market include 3M Company (US), Nitto Denko Corporation (Japan), Avery Dennison Corporation (US), tesa SE (Germany), Scapa Group plc (UK), Intertape Polymer Group (Canada), Compagnie de Saint-Gobain S.A. (France), Berry Global, Inc. (US), Advance Tapes International (UK), Stokvis Tapes BV (Netherlands), Shurtape Technologies, LLC (US), DeWAL Industries (US), MBK Tape Solutions (US), GERGONNE - The Adhesive Solution (France), Adhesives Research, Inc. (US), American Biltrite Inc. (US), Can-Do National Tape, Inc. (US), Av-DEC, Inc. (US), JTAPE Limited (UK), Fralock Innovative Materials Manufacturing & Automation (US), UltraTape (US), and Mask-Off Company, Inc. (US).

  • Published: August 2019
  • Price: $ 5650
  • TOC Available:

• Paints & Coatings Market by Resin (Acrylic, Alkyd, Epoxy, Polyurethane, Polyester), Technology (Waterborne, Solventborne, Powder), Application (Architectural [Residential, Non-residential], Industrial), and Region - Global Forecasts to 2024

  The paints and coatings market is expected to grow from USD 153.9 billion in 2019 to USD 199.9 billion by 2024, at a compound annual growth rate (CAGR) of 5.4%, during the forecast period.Major players operating in the paints and coatings market include AkzoNobel N.V. (Netherlands), PPG Industries (US), The Sherwin-Williams Company (US).

  • Published: August 2019
  • Price: $ 5650
  • TOC Available:

• Elastic Adhesives & Sealants Market by Resin Type (Polyurethane, Silicone, SMP), End-Use Industry (Construction, Industrial, Automotive & Transportation), Region (North America, Europe, APAC, South America, Middle East & Africa) - Global Forecast to 2024

  The elastic adhesives and sealants market is expected to grow from USD 16.4 billion in 2019 to USD 22.3 billion by 2024, at a compound annual growth rate (CAGR) of 6.3%, during the forecast period.Major players operating in the elastic adhesives & sealants include Henkel AG & CO. KGAA (Germany), Arkema S.A. (France), H.B. Fuller Company (US), DowDuPont Inc. (US), Sika AG (Switzerland), and 3M Company (US).

  • Published: August 2019
  • Price: $ 5650
  • TOC Available:

• Structural Adhesives Market by Technology (Solvent-Based, Water-Based), Resin (Epoxy, Polyurethane, Acrylic, MMA, Cyanoacrylate), Application (Building & Construction, Automotive, Wind Energy, Aerospace), and Region - Global Forecast to 2024

  The structural adhesives market is expected to grow from USD 14.0 billion in 2019 to USD 19.4 billion by 2024, at a compound annual growth rate (CAGR) of 6.8%, during the forecast period.The key companies profiled in this report are the Henkel (Germany), Huntsman (US), 3M (US), H.B. Fuller (US), Sika (Switzerland), Illinois Tool Works (US).

  • Published: August 2019
  • Price: $ 5650
  • TOC Available:

• Polyurethane Dispersion Market by Type (Low Solvent, Solvent-Free), Application (Paints & Coating, Adhesive & Sealants, Leather Finishing, Textile Finishing), And Region (North America, Europe, Asia Pacific, MEA, SA) - Global Forecast to 2024

  The global polyurethane dispersion (PUD) market is expected to reach USD 3.4 billion by 2024, at a CAGR of 7.0% during the same period. Dow Chemical Company (US), BASF SE (Germany), Mitsui Chemical Inc. (Japan), Covestro AG (Germany), Huntsman Corporation (US),Lubrizol Corporation (US), Cytec Solvay Group (Belgium), Perstorp AB (Sweden), Chase Corporation (US), Lanxess AG (Germany), Lamberti SPA (Italy), Rudolf GMBH (Germany), and Alberdingk Boley GmbH (Germany), are the key players operating in the polyurethane dispersion market.

  • Published: August 2019
  • Price: $ 5650
  • TOC Available:

• Abrasion Resistant Coatings Market by Type (Metal/Ceramic, Polymer), End-Use Industry (Oil & Gas, Marine, Power Generation, Transportation, Mining, Construction), Region (North America, APAC, Europe, MEA, South America) - Global Forecast to 2024

  The abrasion resistant coatings market is expected to grow from USD 8.0 billion in 2019 to USD 11.1 billion by 2024, at a compound annual growth rate (CAGR) of 6.5% during the forecast period.The leading players in the abrasion-resistant coatings market are AkzoNobel N.V. (Netherlands), Saint-Gobain (France), Jotun A/S (Norway), The Sherwin-Williams Company (US), Hempel A/S (Denmark), Praxair Surface Technologies (UK), Henkel (Germany), and Sika AG (Switzerland).

  • Published: July 2019
  • Price: $ 5650
  • TOC Available:

• Specialty Tapes Market by Resin (Acrylic, Rubber, Silicone), Backing Material (PVC, Paper, Woven/Non-Woven, Pet, Foam, PP), Application (Electronics, Healthcare, Automotive, White Goods, Construction, Printing), and Region - Global Forecast to 2024

  The specialty tapes market size is projected to grow from USD 44.2 billion in 2019 to USD 59.3 billion by 2024, at a CAGR of 6.1% during the forecast period. There is a high demand for specialty tapes in the healthcare & hygiene, electrical & electronics, automotive, white goods, and building & construction industries as manufacturers are mainly focusing on presenting a new variety of products with improved properties. Furthermore, the utilization of the healthcare services, awareness regarding hygiene products, infrastructure development, and upgradation of electronic equipment are increasing the demand for specialty tapes. Thus, manufacturers are manufacturing tapes with an exceptional focus on heat as well as weather resistance features, which is also driving the specialty tapes market.3M (US), Nitto Denko Corporation (Japan), tesa SE (Germany), Lintec Corporation (Japan), Avery Dennison Corporation (US), Scapa Group Plc (US), Intertape Polymer Group, Inc. (Canada), Berry Global Inc. (US), Saint-Gobain Performance Plastics (France), Lohmann GMBH& Co. KG (Germany), and Nichiban Co. Ltd. (Japan). 3M Company (US)

  • Published: July 2019
  • Price: $ 5650
  • TOC Available:

• Non-Conductive Ink Market by Substrate (Glass, Ceramic, Acrylic), Application (PCB Panels, PV Panels, Led Packaging), and Region (North America, Europe, APAC, Middle East & Africa, South America) - Global Forecast to 2024

  The global non-conductive ink market is estimated to be USD 403 million in 2019 and is projected to reach USD 560 million by 2024, at a CAGR of 7.0% during the same period. The demand for non-conductive inks is driven mainly by its growing demand in printed circuit boards.DowDuPont (US), Henkel AG & Co. KGaA (Germany), Teikoku Printing Inks Mfg. Co., Ltd (Japan), Applied Cavitation Incorporated (US), Poly-Ink (France), Sun Chemical Corporation (US), NovaCentrix (US), Creative Materials Inc. (US), Applied Ink Solutions (US), and Vorbeck Materials (US),

  • Published: June 2019
  • Price: $ 5650
  • TOC Available:

• Sustained Release Coatings Market by Application (In Vitro, In Vivo), Substrate Type (Tablets, Capsules, Pills), Polymer Material Type (Ethyl & Methyl Cellulose, Polyvinyl & Cellulose Acetate, Methacrylic Acid, PEG), and Region - Global Forecast to 2024

  The sustained release coating market size is projected to grow from USD 478 million in 2019 to USD 660 million by 2024, at a CAGR of 6.6% during the forecast period. With the increasing demand for microencapsulated products, significant R&D activities are being carried out by various companies in the market, thus aiding the growth of the sustained release coating market. New technologies, such as sustained release coating, are required to tap niche markets in cancer and brain tumor-specific drug delivery.Colorcon (US), BASF (Germany), Evonik (Germany), and Coating Place (US).

  • Published: June 2019
  • Price: $ 5650
  • TOC Available:

• Surface Protection Tapes Market by Type (Polyethylene, Polypropylene, Polyvinyl chloride), Surface Material (Polished metals, Glass, Plastic) End-use (Electronics & appliances, Building & construction, Automotive), and Region - Global Forecast to 2024

  The surface protection tapes market is projected to grow from USD 12.3 billion in 2019, to reach USD 18.0 billion by 2024, recording a CAGR of 8.0% from 2019 to 2024. The demand for surface protection tapes is driven by the growing use of these tapes due to their durability, ease of application, and ease of removal properties. In addition, advancement in the adhesive tapes technology is projected to offer opportunities for the growth of this market.Toray Industries, Inc. (Japan), Intertape Polymer Group (Canada), Tesa SE (Germany), DowDuPont (US), Chevron Phillips Chemical Company (US), Nitto Denko Corporation (Japan), 3M (US), Berry Global Inc. (US), Avery Dennison (US), and Compagnie de Saint-Gobain S.A. (France)

  • Published: June 2019
  • Price: $ 5650
  • TOC Available:

• Hot Melt Adhesive Tapes Market by Adhesive Resin (Rubber, Silicone), Backing Material (PP, Polyester), Product Type (Commodity, Specialty), Application (Packaging, Consumer & DIY, Masking, Healthcare & Hygiene) and Region - Global Forecast to 2024

  The hot melt adhesive tapes market size is projected to grow from USD 15.5 billion in 2019 to USD 21.7 billion by 2024, at a CAGR of 7.0%, during the forecast period. The market is witnessing a high growth due to the growing use of hot melt adhesive tapes in diverse applications. The increasing adoption of hot melt adhesive technology is also leading to the growth of the market.3M Company (US), Nitto Denko Corporation (Japan), tesa SE (Germany), Avery Dennison Corporation (US), Intertape Polymer Group Inc. (Canada), Shurtape Technologies, LLC (US), Scapa Group plc (UK), LINTEC Corporation (Japan), ACHEM Technology Corporation (Taiwan), TE Connectivity Ltd (Switzerland)

  • Published: May 2019
  • Price: $ 5650
  • TOC Available:

• Splicing Tapes Market by Resin (Acrylic, Rubber, Silicone), Backing Material (Paper/Tissue, Pet/Polyester, Non-Woven & Others), Application (Paper & Printing, Packaging, Electronics, Labeling), and Region - Forecast to 2023

  The splicing tapes market size is projected to grow from USD 527 million in 2018 to USD 593 million by 2023, at a CAGR of 2.37% during the forecast period. There is a high demand for splicing tapes in the paper & printing and packaging industries due to the increase in population and digitalization in many parts of the globe. Digitalization process has driven the market of online shopping which has propelled the demand for packaging and labeling. Also, paper and paperboard packaging are gaining consumer’s attraction due to their effective solutions in food & beverages, healthcare, manufacturing, personal care, and other industries which is also driving the splicing tapes market.tesa SE (Germany), 3M Company (US), Nitto Denko Corporation (Japan), Avery Dennison Corporation (US), Intertape Polymer Group, Inc. (Canada), Scapa Group PLC (UK), Shurtape Technologies, PLC (US), ECHOtape (US), and Adhesive Research, Inc. (US). tesa SE (Germany)

  • Published: May 2019
  • Price: $ 5650
  • TOC Available:

• Healthcare Adhesive Tapes Market by Resin (Acrylic, Rubber, Silicone), Backing Material (Paper, Fabric, Plastic), Application (Surgery, Hygiene, Wound Dressing, Secure Iv Lines, Ostomy Seal, Splint, Bandages, Diagnostic), and Region - Forecast to 2023

  The market for healthcare adhesive tapes is estimated to grow from USD 27.2 billion in 2018 to USD 37.3 billion by 2023, at a CAGR of 6.51% during the forecast period due the high demand for these tapes for primary treatment of wounds by covering and securing to prevent bacterial infections, and to hold bandages in place. They are also used for securing dressings, catheters, and infusion or drainage devices. It comes in a variety of lengths and widths that are designed to meet a wide range of bandaging needs. The growth of the market is due to the increasing use of these tapes in wound care and for surgery in emerging economies such as India, China, Thailand, Indonesia, Brazil, and Argentina.3M (US), Cardinal Health, Inc. (US), Nitto Denko Corporation (Japan), Johnson & Johnson Services, Inc. (US), PAUL HARTMANN AG (Germany), Avery Dennison Corporation (US), NICHIBAN Co., Ltd. (Japan), Smith & Nephew (UK), Lohmann GmbH & Co.KG (Germany), Scapa Group Plc (US), Medline Industries Inc. (US), and Essity Aktiebolag (PUBL) (Sweden). Nitto Denko Corporation (Japan)

  • Published: April 2019
  • Price: $ 5650
  • TOC Available:

• Polyaspartic Coatings Market by Type (Pure Polyurea, Hybrid Polyurea), Systems (Quartz, Metallic), End-use Industry (Building & Construction, Transportation, Industrial, Power Generation, Landscape), Region - Global Forecast to 2023

  The market for polyaspartic coatings is projected to grow from USD 358 million in 2018 to USD 521 million by 2023, at a CAGR of 7.8% during the forecast period. Aspartics react with aliphatic polyisocyanates to form polyaspartics. Polyaspartic technology differentiates itself from traditional polyurethanes as these polyaspartic esters can be used in various end-use applications by simple manipulation. While coating systems such as epoxy and polyurethane take longer to cure polyaspartic coatings cure more quickly. These coatings can also be easily formulated for application at temperatures below freezing. Polyaspartic coatings are used for bridges, flooring, OEM coatings, automotive repair, wind turbines, and pipelines in the oil & gas industry, among others.Covestro AG (Germany), The Sherwin-Williams Company (US), PPG Industries (US), BASF SE (Germany), AkzoNobel (Netherlands), Hempel Group (Denmark), Rust-Oleum (US), Laticrete (US), SIKA AG (Switzerland), Satyen Polymers (India), and VIP Coatings (Germany).

  • Published: April 2019
  • Price: $ 5650
  • TOC Available:

• Architectural Coatings Market by Resin Type (Acrylic, Alkyd), Technology (Waterborne, Solventborne, Powder), User Type (DIY, Professional), Coating Type (Interior, Exterior), Application (Residential, Non-Residential) and Region - Global Forecast to 2023

  The market of Architectural coatings is projected to grow from USD 65.0 billion in 2018 to USD 82.4 billion by 2023, at a CAGR of 4.9%, during the forecast period. The global architectural coatings market is witnessing high growth on account of increasing applications, technological advancements, and the growing demand in APAC. The economic growth in developing countries, increasing investment in infrastructure, stringent environmental regulations, growing purchasing power, and the rising demand for green and environmentally friendly coatings are also leading to the growth of the market.PPG Industries, Inc. (US), Akzo Nobel N.V. (Netherlands), The Sherwin-Williams Company (US), Kansai Paints Co., Ltd. (Japan), Asian Paints Limited (India), and Nippon Paint Holdings Co., Ltd. (Japan). Some of the other players operating in the global market include BASF SE (Germany), Masco Corporation (US), Jotun Group (Norway), and RPM International Inc. (US).

  • Published: April 2019
  • Price: $ 5650
  • TOC Available:

• Non-woven Adhesives Market by Technology (Hot-melt), Type (Styrenic Block Copolymers, Amorphous Poly Alpha Olefin, Ethylene Vinly Acetate), Application (Baby Care, Feminine Hygiene, Adult Incontinence, Medical), and Region - Global Forecast to 2023

  The non-woven adhesives market size is estimated to be USD 2.0 billion in 2018 and is projected reach USD 3.1 billion by 2023, at a CAGR of 8.71%, between 2018 and 2023. The key market driver is the growing usage of non-woven adhesives in baby care, feminine hygiene, and adult incontinence applications. Along with that, the rising awareness for high-quality products and growing demand from APAC, the Middle East & Africa, and South America are driving the growth. However, the growth of the non-woven adhesives market is stagnant in the baby diaper market in developed regions, and the market is affected by the volatility in raw material prices.Henkel AG (Germany), H.B. Fuller (US), Arkema (France), Moresco Corporation (Japan), Lohmann- Koester GmbH & Co.KG (Germany), Beardow & Adams (Adhesives) Ltd. (UK), ADTEK Malaysia Sdn Bhd (Malaysia), Colquimica Adhesives (Portugal), Savare Specialty Adhesives (Italy), and Palmetto Adhesives Company, Inc. (US).

  • Published: March 2019
  • Price: $ 5650
  • TOC Available:

• Anti-Graffiti Coatings Market by Vehicle Type (Water Based and Others), End Use Industry (Construction and Transportation), and Region (North America, South America, Europe, Asia Pacific, Middle East & Africa) - Global Forecast to 2023

  The anti-graffiti coatings market report covers both anti-graffiti coatings and anti-graffiti films market. The combined market size of anti-graffiti coatings & films is projected to grow from the estimated USD 72 million in 2018 to USD 87 million by 2023, at a compound annual growth rate (CAGR) of 3.8% during the forecast period. Anti-graffiti coatings and films are widely used as surface protection systems that offer resistance to graffiti or vandalism in the construction and transportation industries. The growth of the anti-graffiti coatings & films market is, therefore, directly associated with the growing demand for graffiti-resistant coatings and films from the construction and transportation industries.Sherwin-Williams Company (US), Evonik Industries (Germany), DuluxGroup (Australia), Axalta Coating Systems (US), Teknos Group (Finland), Merck Group (Germany), Rainguard (US), Wacker Chemie (Germany), 3M (US), Avery Dennison Corporation (US), Opalux (UK), Graffiti Shield (US), Hydron Protective Coatings (UK), and SEI Industrial Chemicals (US).

  • Published: March 2019
  • Price: $ 5650
  • TOC Available:

• Ink Additives Market by Type ( Dispersing & Wetting Agents, Foam Control Additives, Slip/Rub Materials, Rheology Modifiers), Process, Technology, Application (Packaging, Publishing, Printing), and Region - Global Forecast to 2023

  The ink additives market size is estimated at USD 1.5 billion in 2018 and is projected to reach USD 2.0 billion by 2023, at a CAGR of 5.2%. This growth is attributed to the increasing applications, technological advancements, and increasing demand from Asia Pacific, mainly from India, China, and Southeast Asian countries. In addition, the growing e-commerce business in APAC is expected to increase the demand for corrugated boxes and boards, thereby driving the ink additives market.ALTANA AG (US), BASF SE (Germany), Evonik Industries (Germany), Elementis PLC (UK), Dow Corning (US), Shamrock Technologies (US), Munzing Chemie GmbH (Germany), Solvay S.A. (Belgium), Harima Chemicals Group (Japan), and Lubrizol (US).

  • Published: February 2019
  • Price: $ 5650
  • TOC Available:

• Gelcoat Market by Resin Type (Polyester, Vinyl Ester, Epoxy), End Use Industry (Marine, Transportation, Construction, Wind Energy), Region (North America, Asia Pacific, Europe, Middle East & Africa and Latin America)-Global Forecast to 2024

  The gelcoat market is projected to grow from USD 1.2 billion in 2019 to USD 1.7 billion by 2024, at a CAGR of 8.0% between 2019 and 2024. The market is growing due to the high demand from wind energy, construction, transportation, and marine industries.Ineos Enterprise (UK), Bufa Composite Systems GmbH (Germany), HK Research Corporation (US), Allnex (Germany), Scott Bader Company (UK), Poliya Composites Resins and Polymers (Turkey), Interplastic Corporation (US), Alpha Owens Corning (AOC) Aliancys (US), Polynt-Reichhold Group (US), and Turkuaz Polyester (Turkey).

  • Published: February 2019
  • Price: $ 5650
  • TOC Available:

• Coating Resins Market by Resin Type (Acrylic, Alkyd, Polyurethane, Vinyl, Epoxy), Technology (Waterborne, Solventborne, Powder, High Solids), Application (Architectural, General Industrial, Automotive), and Region - Global Forecast to 2023

  The market of coating resins is projected to grow from USD 29.5 billion in 2018 to USD 37.9 billion by 2023, at a compound annual growth rate (CAGR) of 5.1%, during the forecast period. The growth of end-use industries, such as building & construction, packaging, general industrial, automotive, marine, aerospace, and furniture, is a key factor driving the growth of the coating resins market.The major players operating in the coating resins market include Arkema S.A. (France), BASF SE (Germany), Royal DSM N.V. (Netherlands), Allnex Netherlands B.V. (Germany), and DowDuPont (US).Arkema S.A.

  • Published: January 2019
  • Price: $ 5650
  • TOC Available:

• Aerospace Adhesives & Sealants Market by Resin Type (Epoxy, Silicone, PU), Technology (Solvent-based, Water-based), End-use Industry (Commercial, Military, General Aviation), User Type (OEM, MRO), Aircraft Type, and Region - Global Forecast to 2023

  The global aerospace adhesives & sealants market is projected to reach USD 1,008 million by 2023, at a CAGR of 5.4% between 2018 and 2023. The increasing penetration of composites in aircraft and rising aircraft deliveries are increasing the demand for aerospace adhesives and sealants. The emerging middle-class population in developing countries, such as China, India, and Brazil, has also triggered the growth of the aerospace adhesives & sealants market. The key players in the aerospace adhesives & sealants market are 3M (US), Henkel AG & Co. KGaA (Germany), Huntsman International LLC. (US), PPG Industries Inc. (US), and Cytec Solvay Group (Belgium).

  • Published: January 2019
  • Price: $ 5650
  • TOC Available:

• Anti-Slip Coating Market by Resin (Epoxy, Polyurethane, Polyaspartic & Acrylic), Type (Water-based, Solvent-based), End-use Industry, and Region (North America, Europe, APAC, Middle East & Africa, South America) - Global Forecast to 2023

  The market for anti-slip coatings is projected to grow from USD 105 million in 2018 to USD 161 million by 2023, at a CAGR of 6.5% during the forecast period. Anti-slip coatings are used on various surfaces such as workshop floors, stairs, scaffolds, and so on. It is wear resistant and resists oils, acids, detergents, and others. Anti-slip coatings can be directly used without the need for any previous mixing. The leading players in the anti-slip coatings market are 3M (US), PPG Industries (US), Axalta Coating Systems (US), Hempel A/S (Europe), RPM International (Mexico), Sherwin Williams (US), Amsteps Products (England), Randolph Products (UK), No Skidding Products (US), North Central Electric (US), Paramelt RMC B.V (Netherlands), Safemate Anti-slip Pvt. Ltd. (Germany), Skidproof Ltd. (UK), Industrial Applications Inc. (UK), Halosurfaces International Ltd. (New Zealand), Wooster Products (US), Anti-slip Anywhere (US), Tesoplas (England), American Safety Technologies (US), and Diamond Safety Concepts (Japan).

  • Published: January 2019
  • Price: $ 5650
  • TOC Available:

• Seam Sealing Tapes Market by Type (Single-layered, Multi-layered), Backing Material (Polyurethane, Polyvinyl Chloride), and Region (North America, Europe, Asia Pacific, Middle East & Africa, South America) - Global Forecast to 2023

  The seam sealing tapes market is expected to grow from USD 205 million in 2018 to USD 283 million by 2023, at a CAGR of 6.7% from 2018. The growth in the sports and outdoor apparel industry, owing to the growing health awareness among consumers and increasing fitness activities, is driving the growth of the seam sealing tapes market during the forecast period. In addition, increase in demand for protective clothing and accessories such as military, surgical/medical, and chemical protection garments are influencing the growth of the market.Bemis Associates (US), Toray Industries (Japan), Himel Corp. (Korea), Sealon (Korea), Loxy AS (Norway), Gerlinger Industries (Germany), DingZing (Taiwan), Adhesive Films (US), San Chemicals (Japan), and Essentra (UK).

  • Published: December 2018
  • Price: $ 5650
  • TOC Available:

• PVDC Coated Films Market and Acrylic Coated Films Market by Film Type (PP, PET, and PVC), Coating Side (Single and Double), Application (Packaging, Lamination, and Labelling), End-Use Industry and Region - Global Forecast to 2023

  The PVDC coated films market is projected to grow from USD 1.5 billion in 2018 to USD 1.9 billion by 2023, at a CAGR of 6.0% between 2018 and 2023. The acrylic coated films market is projected to grow from USD 714 million in 2018 to USD 978 million by 2023, at a CAGR of 6.5% during the forecast period. The market is growing due to the high demand from the food & beverage and health & personal care industries. PVDC coated films, and acrylic coated films are used in these industries as they exhibit properties such as superior moisture barrier, excellent aroma barrier and mineral oil barrier, and dimensional stability.

  • Published: December 2018
  • Price: $ 5650
  • TOC Available:

• Low Temperature Powder Coatings Market by Substrate (Non-metal, Metal), Resin (Polyester & Hybrids, Epoxy & Hybrids, PU, Acrylic), End-use Industry (Furniture, Appliances, Automotive, Architectural, Electronics, Medical), and Region - Forecast to 2023

  The market for low temperature powder coatings is estimated to grow from USD 3.9 billion in 2018 to USD 5.2 billion by 2023, at a CAGR of 6.0% during the forecast period. Increase in energy savings due to reduction in cure temperatures, growing end-use industries, and technological advancements are the major factor driving the low temperature powder coatings market. Low temperature coatings have been specifically formulated to develop a fully cured coating at lower oven temperatures or with shorter dwell times at conventional oven temperatures. Powder-based low temperature coatings have near zero volatile organic compounds (VOC) emission and produce much thicker coatings than conventional liquid coatings without running or sagging. They also exhibit superior properties over conventional paints, including high resistance to corrosion, high-quality finish, chipping and abrasion resistance, durability, cost-effectiveness, and reduced processing time.Akzo Nobel N.V. (Netherlands), Axalta Coating Systems, LLC (US), Jotun A/S (Norway), PPG Industries, Inc. (US), The Sherwin-Williams Company (US), Teknos Group (Finland), Forrest Technical Coatings (US), Platinum Phase Sdn Bhd (Malaysia), Tulip Paints (India), Protech Powder Coatings Inc. (Canada), and CIN Industrial Coatings (Portugal).

  • Published: December 2018
  • Price: $ 5650
  • TOC Available:

• Water-based Adhesive Market by Resin Type (PAE, PVA Emulsion, VAE Emulsion, SB Latex, and PUD), Application (Tapes & Labels, Paper & Packaging, Woodworking, Building & Construction, and Automotive & Transportation), and Region - Global Forecast to 2023

  The water-based adhesive market is expected to grow from USD 15.3 billion in 2018 to USD 20.2 billion by 2023, at a CAGR of 5.7% during the forecast period. The growth of several applications such as tapes & labels, paper & packaging, and woodworking is driving the demand for water-based adhesives.Major players operating in the water-based adhesive market include Henkel (Germany), H.B. Fuller (US), Arkema (Bostik) (France), and Sika (Switzerland).

  • Published: November 2018
  • Price: $ 5650
  • TOC Available:

• Cable Testing and Certification Market by Voltage (Low Voltage, Medium Voltage and High Voltage), Test (Routine Test, Sample Test and Type Test), End-User (Cable Manufacturers and Utility Providers), and Region - Global Forecast to 2023

  The market for cable testing and certification is projected to grow from USD 11.3 billion in 2018 to USD 14.7 billion by 2023, at a compound annual growth rate (CAGR) of 5.4% during the forecast period. Cable testing and certification are widely used to verify the cable’s safety and efficiency. The growth of the cable testing and certification market is, therefore, directly associated with the growing demand for cables in the electrical & electronics, transportation, and energy generation & distribution applications.DEKRA (Germany), Underwriters Laboratories (US), British Approvals Service for Cables (UK), SGS (Switzerland), BRE Global (UK), TÜV Rheinland (Germany), Bureau Veritas (France), Intertek (UK), TÜV NORD GROUP (Germany), North Central Electric (US), RN Electronics (UK), TÜV SÜD (Germany), Eland Cables (UK), and Industrial Tests (US).

  • Published: November 2018
  • Price: $ 5650
  • TOC Available:

• Adhesive Film Market by Film Material (Polypropylene, Polyvinyl Chloride, Polyethylene), Application (Tapes, Graphic Films, Labels), End-Use Industry (Packaging, Transportation, Electrical & Electronics), and Region - Global Forecast to 2023

  The market for adhesive film is expected to grow from USD 57.2 billion in 2018 to USD 75.4 billion by 2023, at a compound annual growth rate (CAGR) of 5.7% during the forecast period. The growth of end-use industries such as packaging, automotive & transportation, and electrical & electronics is the key factors driving the growth of the adhesive film market. Major players operating in the adhesive film market include 3M Company (US), Avery Dennison Corporation (US), UPM-Kymmene OYJ (Finland), CCL Industries (Canada), and Toray Industries (Japan), among others.

  • Published: October 2018
  • Price: $ 5650
  • TOC Available:

• Packaging Coating Additives Market by Function (Slip, Anti-Static, Anti-fog, Anti-block, Antimicrobial), Formulation (Water-based, Solvent-based, Powder-based), Application (Food, Industrial, Healthcare, Consumer), and Region - Global forecast to 2023

  The packaging coating additives market is projected to grow from USD 688.4 million in 2018 to USD 874.5 million by 2023, at a CAGR of 4.9% from 2018 to 2023. Increasing demand for packaged foods is driving the growth of the packaging coating additives market. Major players operating in the packaging coating additives market include Croda International Plc (UK), BASF SE (Germany), Clariant AG (Switzerland), Lonza Group (Switzerland), 3M Company (US), Arkema Group (France), Evonik Industries AG (Germany), and Solvay S.A. (Belgium), among others.

  • Published: September 2018
  • Price: $ 5650
  • TOC Available:

• Silicone Elastomers Market by Type (HTV, LSR, RTV), Process (Extrusion, Liquid Injection, Injection, Compression), End-use Industry (Transportation, Electronics, Healthcare, Consumer Goods, Industrial Machinery), and Region - Global Forecast to 2023

  The increasing use of silicone elastomers in various end-use industries is driving the silicone elastomers market across the globe. The silicone elastomers market is projected to grow from USD 6.38 billion in 2018 to USD 8.81 billion by 2023, at a CAGR of 6.7% between 2018 and 2023. The superior properties of silicone elastomers, aging population fueling the demand from the healthcare industry, and high demand for silicone elastomers from the electrical & electronics industry are driving the silicone elastomers market across the globe.Dow Corning (US), Wacker Chemie (Germany), Momentive Performance Materials (US), Shin-Etsu (Japan), China National Bluestar Silicones (China), KCC Corporation (South Korea), Reiss Manufacturing (US), Mesgo SpA (Italy), Zhejiang Xinan Chemical Industrial Group Co., Ltd. (China), and Specialty Silicone Products (US) are the key players operating in the silicone elastomers market.

  • Published: September 2018
  • Price: $ 5650
  • TOC Available:

• Foam Tape Market by Resin (Acrylic, Rubber, Silicone), Technology (Solvent, Water, Hot-Melt), Type (PE, PU, Acrylic), End-Use Industry (Automotive, Building & Construction, Electrical & Electronics, Paper & Printing), and Region - Global Forecast to 2023

  The foam tape market is estimated at USD 7.44 billion in 2018 and is projected to reach USD 10.35 billion by 2023, at a CAGR of 6.83% from 2018 to 2023. The increasing use of foam tape in various industries such as electrical & electronics, building & construction, automotive, and paper & printing is driving the foam tape market. 3M Company (US), Nitto Denko Corporation (Japan), Tesa SE (Germany), Lintec Corporation (Japan), Intertape Polymer Group, Inc. (Canada), Avery Dennison Corporation (US), HALCO (US), 3F (Germany), and Scapa Group Plc (UK) are some of the key players operating in the foam tape market.

  • Published: September 2018
  • Price: $ 5650
  • TOC Available:

• Fiberglass Roving Market by Fiber Glass Type (E, ECR, H, AR, S),Product Type(Single-end, Multi-end, Chopped),End-use Industry (Transportation, Construction, Electrical & Electronics, Pipe & Tank, Wind, Aerospace, Marine),and Region Global Forecast to 2023

  The global fiberglass roving market is projected to grow from USD 8.24 billion in 2018 to USD 11.02 billion by 2023, at a CAGR of 6.0% during the forecast period. The fiberglass roving market is growing due to the high demand from the wind energy, electrical & electronics, pipes & tanks, construction & infrastructure, and transportation industries. Fiberglass roving products are preferred as they can reduce the weight of the product and are stronger than metallic parts. The fiberglass roving market witnessed strong growth in the past few years due to the growing use in the US, Germany, China, Brazil, and Japan.Companies such as Owens Corning (US), Jushi Group (China), Chongqing Polycomp International Corp. (China), and Taishan Fiberglass (China) are some of the leading players in the global fiberglass roving market

  • Published: September 2018
  • Price: $ 5650
  • TOC Available:

• Coupling Agents Market by Type (Sulfur Silane, Vinyl Silane, Amino Silane, Epoxy Silane), Application (Rubber & Plastics, Fiber Treatment, Adhesives & Sealant, Paints & Coatings), and Region (North America, Europe, APAC) - Global Forecast to 2023

  The coupling agent market is projected to reach USD 614.1 million by 2023, at a CAGR of 3.5% from 2018 to 2023. Coupling agents are bifunctional compounds, which are manufactured by using silica and mono-silanes. The superior binding properties along with high adhesion and ease of processing make coupling agents a choice of material for various applications in rubber tire manufacturing and other automotive components. Coupling agents are mainly used in rubber & plastics and fiber treatment applications. The growth of these applications is driving the coupling agent market, globally. The key companies profiled in the global coupling agent market research report include Wacker Chemie (Germany), Momentive Performance Materials (US), Dow-DuPont (US), Evonik (Germany), and Shin-Etsu Chemicals (Japan), and others.

  • Published: August 2018
  • Price: $ 5650
  • TOC Available:

• Intumescent Coatings Market by Type (Thin-Film, Thick Film), Substrates (Structural Steel & Cast Iron, Wood), Application Technique (Spray, Brush & Roller), End-use Industry (Building & Construction, Industrial), and Region - Global Forecast to 2023

  The intumescent coatings market is projected to grow from an estimated USD 900.1 million in 2018 to USD 1,110.0 million by 2023, at a CAGR of 4.3% from 2018 to 2023. Intumescent coatings are used for passive fire protection in end-use industry segments, such as building & construction, industrial, and aerospace. Intumescent coatings act as a protective barrier for substrates against fire to provide rescue and evacuation time in the event of a fire. Increasing awareness, regulations, and emphasis regarding the safety measures for the building & construction industry as well as the increasing preference for lightweight materials in the building & construction industry are driving the market for intumescent coatings.Key players in the intumescent coatings market include AkzoNobel (Netherlands), PPG (US), Jotun (Japan), The Sherwin-Williams Company (US), and Hempel (Denmark).

  • Published: August 2018
  • Price: $ 5650
  • TOC Available:

• First
• Previous
• 1
• 2
• 3
• 4
• 5
• Next
• Last