Here are relevant reports on : tent-fabric-market
-
Automotive Upholstery Market by Application (Carpets, Dashboards, Roof Liners, Seat Covers, Sun Visors & Trunk Liners), Upholstery Materials, Fabric Type (Non-woven & Woven), Integrated Technology, Vehicle Type, and Region - Global Forecast to 2025
The automotive upholstery market is estimated to be USD 4.65 Billion in 2017 and is projected to grow at a CAGR of 6.59% from 2017 to 2025, to reach a market size of USD 7.74 Billion by 2025. The key drivers for the market are the increasing demand for advanced automotive technologies and automotive interiors, rising focus on lightweight automotive materials, and the development of a varied non-fabric substitutes for automotive upholstery. The automotive upholstery market is dominated by a few global application suppliers and comprises several regional players. Some of the key players operating in the market are Lear Corporation (US), Adient PLC (Ireland), Toyota Boshoku (Japan), and Faurecia S.A. (France).
- Published: February 2018
- Price: $ 4950
- TOC Available:
-
Healthcare Adhesive Tapes Market by Resin (Acrylic, Rubber, Silicone), Backing Material (Paper, Fabric, Plastic), Application (Surgery, Hygiene, Wound Dressing, Secure Iv Lines, Ostomy Seal, Splint, Bandages, Diagnostic), and Region - Forecast to 2023
The market for healthcare adhesive tapes is estimated to grow from USD 27.2 billion in 2018 to USD 37.3 billion by 2023, at a CAGR of 6.51% during the forecast period due the high demand for these tapes for primary treatment of wounds by covering and securing to prevent bacterial infections, and to hold bandages in place. They are also used for securing dressings, catheters, and infusion or drainage devices. It comes in a variety of lengths and widths that are designed to meet a wide range of bandaging needs. The growth of the market is due to the increasing use of these tapes in wound care and for surgery in emerging economies such as India, China, Thailand, Indonesia, Brazil, and Argentina.3M (US), Cardinal Health, Inc. (US), Nitto Denko Corporation (Japan), Johnson & Johnson Services, Inc. (US), PAUL HARTMANN AG (Germany), Avery Dennison Corporation (US), NICHIBAN Co., Ltd. (Japan), Smith & Nephew (UK), Lohmann GmbH & Co.KG (Germany), Scapa Group Plc (US), Medline Industries Inc. (US), and Essity Aktiebolag (PUBL) (Sweden). Nitto Denko Corporation (Japan)
- Published: April 2019
- Price: $ 4950
- TOC Available:
-
Synthetic Dyes Market by Structure, Form, Application, Fabric Type, Type (Acid; Disperse; Reactive; Direct; Basic; Solvent), End-Use Industry (Textile; Leather; Pulp & Paper; Building & Construction; Personal Care) - Global Forecast to 2029
The synthetic dyes market is expected to grow from USD 7.08 billion In 2024 to USD 9.05 billion by 2029, at a CAGR of 5.0% during the forecast period. Mergers, new product launches and expansions are the major growth strategies adopted by the key players in the market. The key global players in the Synthetic Dyes market Archroma (Switzerland), Lanxess (Germany), Zhejiang Longsheng Group Co., Ltd (Dystar) (China), Heubach GmbH (Germany), Kiri Industries (India), Atul Ltd (India), Bodal Chemicals Ltd (India), Chromascape (US), Henkel AG & Co (Germany), Kemira Oyj (Finland), Milliken & Company (US), Solenis LLC (US), Zhejiang Jihua Group (China) and Zhejiang Runtu Co., Ltd (China).
- Published: September 2024
- Price: $ 4950
- TOC Available:
-
Performance Fabric Market by Type (Coated Fabrics, Polyamide, Polyester, Composite Fabrics, & Aramid), Application (Water, Stain, Abrasion, Fire, U.V. Resistance & Anti-Microbial), End-Use Industry and by Region - Global Trends & Forecast to 2020
The global performance fabric market is projected to register a CAGR of 4.8% between 2015 and 2020 to reach a market size of USD 79.55 Billion by 2020. The performance fabrics market is currently growing on account of the technological developments in performance fabrics and the increasing demand for higher functionality and comfort fabrics from end-use industries. The base year taken for estimating the market figures of 2015 in the report is 2014. This report contains forecasts for the performance fabrics market between 2015 and 2020.
- Published: February 2016
- Price: $ 4950
- TOC Available:
-
Data Center Fabric Market by Solutions (Switching, Routers, Controllers, SAN, Network Security Equipments, Management Software) & User Environment (Enterprises, Telecommunications, Cloud Providers) - Worldwide Forecasts & Analysis (2014 - 2019)
Continuously developing next-generation enterprise Information Technology (IT) architecture for data centers is enhancing the adoption and utilization of fabric in the data centers. Data center fabric is emerging as a solution to meet the networking demands for virtual and cloud environments in new data centers. Fabric network reduces the tiers in the legacy network architecture, providing agility, flexibility and efficiency in operations. The traditional network is not efficient in handling east-west flow of data among servers due to virtualization of data centers. Fabric provides relatively simple network architecture than the three-tiered network, and helps in utilizing the advantages of new technologies such as virtual machines and cloud storage to the fullest.
- Published: April 2014
- Price: $ 4950
- TOC Available:
-
Automotive Interior Materials Market by Type (Polymer, Genuine Leather, Fabric), Application (Seat, Dashboards, Safety Components), Vehicle Type (Passenger Cars, Buses & Coaches), and Region - Global Forecast to 2030
The automotive interior materials market is expected to grow from USD 53.09 billion in 2024 to USD 65.26 billion by 2030, at a CAGR of 3.52% during the forecast period. The key players profiled in the report include Lear Corporation (US), Asahi Kasei Corporation (Japan), Toyota Boshoku Corporation (Japan), Forvia (France), Toyoda Gosei Co., Ltd. (Japan), Grupo Antolin-Irausa, S.A.U. (Spain), Yanfeng Automotive Interiors (China), SEIREN CO., LTD. (Japan), DK Leather Seats Sdn. Bhd. (Malaysia), DRAXLMAIER Group (Germany), and among others.
- Published: May 2025
- Price: $ 4950
- TOC Available:
-
Wetroom Waterproofing Solutions Market by Type (Fabric/Fleece Backed Sheet Membrane, Pre-Waterproofed Substrates, Shower Pan Liner), Raw material (Polyurethane, PVC, Polyurea, Acrylic, ABS, Polystyrene), Application, & Region - Global Forecast 2028
The wetroom waterproofing solutions market is expected to grow from USD 6.4 billion in 2023 to USD 8.3 billion by 2028, at a CAGR of 5.4% during the forecast period. To enable an in-depth understanding of the competitive landscape, the report includes the profiles of some of the top players in the Wetroom waterproofing solutions Market. These Sika AG (Switzerland), BASF SE (Germany), MAPEI Corporation (Italy), Knauf Gypsum Pty Ltd (Australia), Henry Company (US).
- Published: August 2023
- Price: $ 4950
- TOC Available:
-
Medical Packaging Market by Material (Polymer, Non-woven Fabric, Paper & Paperboard), Packaging Type (Bags & Pouches, Trays, Boxes), Application (Medical Equipment & Tools, Medical Devices, Implants, IVDs), Packing Type, and Region - Forecast to 2022
The market for medical packaging is projected to grow from USD 35.31 Billion in 2016 to USD 50.55 Billion by 2022, at a compound annual growth rate (CAGR) of 6.29% from 2017 to 2022. The base year considered for the study is 2016 and the market size is projected from 2017 to 2022. The global market for medical packaging is dominated by large players such as Avery Dennison Corporation (U.S.), 3M Company (U.S.), E. I. du Pont de Nemours and Company (U.S.), CCL Industries, Inc. (Canada) , Amcor Limited (Australia), Constantia Flexibles Group GmbH (Austria), Bemis Company (U.S.) , Sonoco Products Company (U.S.) , WestRock Company (U.S.). These players have adopted various strategies to expand their global presence and increase their market share. Mergers & acquisitions, expansions, and new product launches are some of the major strategies adopted by market players to achieve growth in the medical packaging market.
- Published: July 2017
- Price: $ 4950
- TOC Available:
-
Composite Tooling Market by Fiber Type (Carbon and Glass), Resin Type (Epoxy, BMI, and others), Form (Fabric and Prepreg), and Application (Aerospace & Defense, Wind, Automotive, and Others) - Global Forecast to 2021
The market size of composite tooling was worth USD 361.0 Million in 2015, and is projected to reach USD 551.8 Million by 2021, at a CAGR of 7.35%. Composite tooling is becoming crucial in automotive, aerospace, wind, and among others. The need for superior quality tooling and strong and rigid composite components is increasing the demand of composite tooling.
- Published: September 2016
- Price: $ 4950
- TOC Available:
-
Prepreg Market by Fiber Type (Glass, Carbon, Others), By Resin Type (Thermoset, Thermoplastic), Form (Tow, Fabric), Manufacturing, Application ( Aerospace & Defense, Wind Energy, Sporting Goods, Automotive) and Region - Global Forecast 2026
The global prepreg market size is projected to reach USD 12.6 billion by 2026, at a CAGR of 12.5% during the forecast period. The key players in the prepreg market include Solvay Group (Belgium), Hexcel Corporation (United States), Toray Industries, Inc. (Japan), Teijin Limited (Japan), and Mitsubishi Chemical Holdings Corporation (Japan), are some of the key players in the prepreg market. SGL Group (Germany), Axiom Materials (United States), Gurit Holding AG (Switzerland), Park Aerospace Corp. (United States), and Plastic Reinforcement Fabrics Ltd. (United Kingdom) are among others. These companies are involved in adopting various inorganic and organic strategies to increase their foothold in the prepreg market. These players have taken different organic and inorganic developmental strategies over the past five years.
- Published: March 2022
- Price: $ 4950
- TOC Available:
Records 21 to 30 of 50
