Here are relevant reports on : machine-vision-lighting-market
-
Intelligent Lighting Market by Lighting Type (LED, CFL, LFL, HID), Control Component (Relays, Timers, Occupancy Sensors, Daylight Sensors, Dimming Actuators, Switch Actuators, Blind/Shutter Actuators, Transmitters, Receivers) & Geography (2014-2020)
Intelligent lighting involves the use of lighting controls that deliver correct amount of light when needed. It deals with the technology where lights can automatically perform various operations at set times or under set conditions.
- Published: August 2026
- Price: $ 4950
- TOC Available:
-
LED Light Engine Market by Product Type (Lamps and Luminaires), Installation Type (New Installation and Retrofit Installation), End-Use Application (Indoor Lighting and Outdoor Lighting), and Geography - Forecast to 2036
The global LED light engine market was valued at USD 63.41 billion in 2025 and is estimated to reach USD 139.31 billion by 2036, at a CAGR of 7.4% between 2025 and 2036. Key factors influencing the market growth are increasing demand for energy-efficient lighting systems; modernization and development of infrastructure, for example, smart cities, which leads to the implementation of lighting systems based on IoT; reduction in the price of LEDs; penetration of LEDs as light sources in general lighting; and rapid growth of LED technology over conventional lighting technology. The LED light engine market is currently dominated by Signify Lighting NV (Netherlands), OSRAM Licht AG (Germany), GE lighting (US), Cree, Inc. (US), Hubbell Inc. (US), Zumtobel Group AG (Austria), Wipro Enterprises (P) Ltd. (India), Samsung Electronics (South Korea), LG Innotek (South Korea), Legrand SA (France), Glamox AS (Norway), Lutron Electronics Co., Inc. (US), among others. A few of the major strategies adopted by these players to compete in the LED light engine market, include product launches & developments, partnerships, and mergers & acquisitions.
- Published: August 2026
- Price: $ 4950
- TOC Available:
-
Smart Offices Market by Product (Smart Lighting/Lighting Controls, Security Systems, Energy Management Systems, HVAC Control Systems, Audio–Video Conferencing Systems), Software & Service, Office Type, and Geography - Global Forecast to 2035
The Smart Office Market is undergoing rapid expansion as enterprises globally transition toward intelligent workplace ecosystems powered by AI, IoT, automation, and digital collaboration platforms. In 2025, the global Smart Office Market size is estimated at approximately USD 47 billion, and it is projected to reach nearly USD 142 billion by 2035, growing at a CAGR of 11 %–12 % during the forecast period 2025–2035.
- Published: August 2026
- Price: $ 4950
- TOC Available:
-
Robotic Vision Market Size, Share & Trends by Type (2D Vision Systems, 3D Vision Systems), Component (Cameras, LED Lighting, Optics, Processors & Controllers, Frame Grabbers, Deep Learning Software), Deployment (Robotic Guidance System, Robotic Cells)- Global Forecast to 2030
The global robotic vision market is expected to grow from USD 3.29 billion in 2025 to USD 4.99 billion in 2030, at a compound annual growth rate (CAGR) of 8.7% during the forecast period. The Key Players Cognex Corporation (US), KEYENCE CORPORATION (Japan), Teledyne Technologies Inc. (US), Omron Corporation (Japan), and FANUC CORPORATION (Japan).
- Published: June 2025
- Price: $ 4950
- TOC Available:
-
North America Robotic Vision Market by Type (2D Vision, 3D Vision Systems), Component (Cameras, LED Lighting, Optics, Processors & Controllers, Frame Grabbers, Deep Learning Software), Deployment (Robotic Guidance System, Robotic Cells) - Forecast to 2030
The North America robotic vision market is projected to reach USD 0.95 billion in 2025 and USD 1.45 billion by 2030, at a CAGR of 8.9% from 2025 to 2030. Leading players in the North America robotic vision market include Cognex Corporation (US), Keyence Corporation, Teledyne Technologies Inc., Omron Corporation, and Fanuc Corporation.
- Published: July 2026
- Price: $ 4950
- TOC Available:
-
U.S. Machine-to-Machine (M2M) Connections Market by Technology (Wired and Wireless), Industry Verticals (Healthcare, Utilities, Retail, Consumer Electronics, Automotive & Transportation, Security & Surveillance, and Others) - Forecast to 2020
Machine-to-Machine (M2M) refers to technologies which allow wired and wireless systems to connect to devices of the same type and enable communication within the same. The migration to 3G and 4G networks worldwide and standardization of IPv6 are some of the key reasons for the growth of this technology. The market size of M2M Communications in the U.S. is expected to reach $7,262.76 Million by 2020, at a CAGR of 6.79% between 2015 and 2020.
- Published: June 2015
- Price: $ 4950
- TOC Available:
-
Machine-to-machine (M2M) Connections Market by Technology (Wired, Wireless), End-user Industry (Automotive & Transportation, Utilities, Security & Surveillance, Healthcare, Retail, Consumer Electronics) and Region - Global Forecast to 2029
The machine-to-machine (M2M) connections market is expected to grow from USD 2.9 billion units in 2024 to USD 5.3 billion units by 2029, at a compound annual growth rate (CAGR) of 12.7% during the forecast period.The key players AT&T Intellectual Property (US), Cisco Systems, Inc. (US), Huawei Technologies (China), NXP Semiconductors N.V. (Netherlands), Texas Instruments Incorporated (US), Intel Corporation (US), China Mobile International Limited (China), Thales (France), Vodafone Group Plc (UK), Murata Manufacturing Co., Ltd. (Japan), U-Blox Holding AG (Switzerland).
- Published: January 2024
- Price: $ 4950
- TOC Available:
-
Material Testing Market by Type (Universal Testing Machine, Servohydraulic Testing Machine, Hardness Testing Equipment), Material (Metal, Plastic, Rubber & Elastomer), End User (Automotive, Construction), & Region - Global Forecast to 2030
The material testing market is expected to grow from USD 871.9 million in 2025 to USD 1,070.9 million by 2030, at a CAGR of 4.2% during the forecast period. Acquisitions and expansions are the major growth strategies adopted by the key players in the market. The key global players in the material testing market include Illinois Tool Works Inc. (US), ZwickRoell (Germany), Shimadzu Corporation (Japan), Tinius Olsen (US), Ametek (US), Mitutoyo Corporation (Japan), QATM (Germany), ERICHSEN GmbH & Co. KG (Germany), Hegewald & Peschke (Germany), and Nova Measurements LLC (US).
- Published: September 2025
- Price: $ 4950
- TOC Available:
-
Machine Tools Market by Product Type (Milling Machines, Turning Machines, Grinding Machines, Electrical Discharge Machine, Machining Centers), Automation Type (CNC, Conventional), End-User Industry, Sales Channel, and Region - Global Forecast to 2032
The machine tools market is projected to reach USD 105.11 billion by 2032, from USD 81.09 billion in 2025, with a CAGR of 3.8%. The machine tools market is dominated by established players such as Makino Inc. (Japan), JTEKT Corporation (Japan), Okuma Corporation (Japan), DMG MORI Co., Ltd. (Japan), and DN Solutions (South Korea). These companies have a global distribution network across Asia Pacific, North America, and Europe. They are vital in their domestic regions and explore geographic diversification alternatives to grow their businesses. They also focus on increasing their market share through expansion, investments, joint ventures, collaboration, and partnerships.
- Published: June 2025
- Price: $ 4950
- TOC Available:
-
Vision Care Market - Forecast to 2023
The global vision care market is expected to reach approximately USD 64 Billion by 2023 from USD 52 Billion in 2018, at a CAGR of 4.2% from 2018 to 2023. The prominent players in the global vision care market are CooperVision (US), Essilor International S.A. (France), Carl Zeiss Meditec (Germany), Johnson & Johnson Vision Care (US), Luxottica (Italy), Novartis International AG (Switzerland), Valeant Pharmaceuticals (Canada), Bausch + Lomb (US), Menicon (Japan), and Paragon Vision Sciences (US).
- Published: August 2026
- Price: $ 4950
- TOC Available:
Records 31 to 40 of 50
