Here are relevant reports on : tractor-seat-market
-
Spring Market by Vehicle Type (Passenger Car, Light & Heavy Commercial Vehicle), Spring Type (Coil, Leaf, Balance, Flat), Application Type (Air Bag, Seat Belt, Suspension, Fuel Injection, Clutch, Valve), and Region - Global Trends and Forecast to 2020
Springs are being used in automobiles since a very long time because of the vital service in terms of comfort, safety and convenience that they provide. In case of suspension, they enhance the driver’s manoeuvrence over the vehicle as well as provide the comfort. For seat belt and airbags, they help to provide safety to the occupants, whereas in case of powertrain, the valve springs and fuel injector springs help in maintaining valve timing and fuel injection. The importance of springs in the automotive industry can be categorized in three main points. Firstly, the springs improve the performance of the components. The performance of a vehicle depends highly on a properly functioning transmission and to ensure that the springs need to be of high quality. Secondly, high quality springs also allow the vehicle to run efficiently which implies fuel saving. This becomes an important factor especially in the price sensitive economies of the developing and under developed nations. And last but not the least, good quality springs offer durability to the vehicle which is one of the biggest concerns when the vehicle is being purchased.
- Published: June 2026
- Price: $ 4950
- TOC Available:
-
Electric Vehicle Plastics Market by Type (ABS, PU, PA, PC, PVB, PP, PVC, PMMA), Application & Component (Dashboard, Seat, Trim, Bumper, Body, Battery, Engine, Lighting, Wiring), Battery Type & Material, Vehicle Type and Region - Global Forecast to 2027
The Electric Vehicle Plastics market is projected to reach USD 12.6 billion in 2027, at a CAGR of 27.9% during the forecast period. The Major players in Electric Vehicle Plastics market includes BASF SE(Germany), Lyondellbasell Industries Holdings B.V. (Netherlands), Sabic (Saudi Arabia), Dow (US) & Dupont (US).
- Published: September 2022
- Price: $ 4950
- TOC Available:
-
Bathroom and Toilet Assist Devices Market by Product Type (Chairs & Stools, Bath Lifts, Toilet Seat Raisers, Toilet Aids, Commodes, Handgrips & Grab Bars, Bath Aids), Region (North America, Asia-Pacific, Europe, Row) - Global Forecast to 2020
The global bathroom and toilet assist devices market size is projected to grow at a CAGR of 5.7%. Factors, such as rise in the aging population, growing rate of awareness about assistive devices, and technological advancement are driving the growth of this market.
- Published: April 2016
- Price: $ 4950
- TOC Available:
-
Marine Seats Market by Component, Ship Type (Military, Commercial), Seat Type (Captain Seats, Passenger Seats, Crew Seats, General Seats), End User (OEM, Aftermarket) and Region (North America, Europe, APAC and Rest of the World) - Forecast to 2027
The Marine seats market is expected to grow from USD 1.6 billion in 2022 to USD 1.9 billion by 2027, at a compound annual growth rate (CAGR) of 4.9% during the forecast period.The Major players West Marine (US), Sun Marine (Netherlands), Recaro (Netherlands), Allsalts (Canada), and Shockwave (Canada).
- Published: August 2022
- Price: $ 4950
- TOC Available:
-
Springs Market for Automotive, By Application (Air Bag, Seat Belt, Suspension, Fuel Injection, Clutch, Valve, Others), Type (Coil Springs, Leaf Spring, Balance Spring, Flat Spring, Others), Vehicle Type and Region – Global Trends and Forecast to 2021
Springs are being used in automobiles since a very long time because of the vital service in terms of comfort, safety and convenience that they provide. In case of suspension, they enhance the driver’s handling over the vehicle as well as provide the comfort. The study will segments the automotive spring market on the basis of region, type, and by application type.
- Published: June 2026
- Price: $ 4950
- TOC Available:
-
Car Door Latch Market by Application (Side Door Latch, Hood Latch, Tailgate Latch, and Back Seat Latch), Lock Type (Electronic and Non-Electronic), Vehicle Type (Passenger Car and Light Commercial Vehicle) and Region - Global Forecast to 2021
The car door latch market is projected to grow at a CAGR of 5.80%, from USD 4.97 Billion in 2016 to USD 6.59 Billion by 2021. Global automobile demand is increasing continuously due to reasons such as increase in population, developments in suburbs, and infrastructural expansions, which are major driving factors for the car door latch market. As increase in global automobile demand will directly impact the production of car door latches.
- Published: February 2017
- Price: $ 4950
- TOC Available:
-
Passenger Car Seat Market by Type & Technology (Powered, Heated, Ventilated, Memory, Massage), Trim Material (Genuine, Synthetic, Fabric, Foam), Component (Armrest, Belt, Headrest, Height Adjuster, Recliner), EV (BEV, PHEV, FCEV) - Global Forecast to 2030
The passenger car seat market is projected to reach USD 46.1 billion by 2030 at a CAGR of 1.1% over the forecast period. Prominent companies include Adient Plc (US), Faurecia (France), Lear Corporation (US), Toyota Boshoku Corporation (Japan), and Magna International (Canada) are the leading manufacturers of passenger car seats in the global market.
- Published: July 2023
- Price: $ 4950
- TOC Available:
-
Aircraft Evacuation Market by Equipment Type (Life Vest, Evacuation Slide & Raft, Ejection Seat, & Emergency Floatation), Fit (Line fit & Retrofit), Aircraft Type (NB, WB, VLA, RTA, Fighter Jet, & Helicopter), and Region - Global Forecast to 2022
The aircraft evacuation market is projected to grow from USD 1.30 Billion in 2017 to USD 1.73 Billion by 2022, at a CAGR of 5.96% during the forecast period. Key players in the aircraft evacuation market are UTC Aerospace Systems (U.S.), Zodiac Aerospace (France), EAM Worldwide (U.S.), Martin-Baker (U.K.), Npp Zvezda Pao (Russia), Trelleborg AG (Sweden), GKN Aerospace Services Limited (U.K.), Cobham Plc (U.K.), and DART Aerospace (Canada), among others. These companies have well-equipped manufacturing facilities and strong distribution network across North America, Europe, and Asia-Pacific.
- Published: June 2017
- Price: $ 4950
- TOC Available:
-
Automotive Interior Market by Component (HUD, Door Panel, Dome Module, Seat, Headliner, Center Console, Center Stack), Material Type, Level of Autonomy, Electric Vehicle, Passenger Car Class, ICE Vehicle Type, and Region - Global Forecast to 2032
The global automotive interior market size is projected to reach USD 205.77 billion by 2032, at a CAGR of 2.2% during the same period. The automotive interior market is dominated by global players such as FORVIA Faurecia (France), Adient plc. (US), Continental AG (Germany), Yanfeng (China), Lear Corporation (US), Antolin (Spain), SAMVARDHANA MOTHERSON GROUP (India), Toyota Boshoku Corporation (Japan), Robert Bosch GmbH (Germany), Hyundai Mobis (South Korea), Denso Corporation (Japan), ZF Friedrichshafen AG (Germany), Panasonic (Japan), Valeo (France), and DRÄXLMAIER Group (Germany).
- Published: May 2025
- Price: $ 4950
- TOC Available:
-
In-vehicle Infotainment Market by Component (Infotainment Unit, HUD, Passenger Display, Digital IC), Application (Navigation, VPA, App Store, Music, Rear Seat), OS, Connectivity, Form Factor, Display Size, Location, ICE & EV, and Region – Global Forecast to 2032
The in-vehicle infotainment market is projected to grow from USD 23.07 billion in 2025 to USD 40.49 billion by 2032 at a CAGR of 8.4%.The key Players
- Published: January 2026
- Price: $ 4950
- TOC Available:
Records 31 to 40 of 50
