Here are relevant reports on : silicon-carbide-market
-
Aircraft Power Electronics Market by Components (Generators, Rectifiers, Converters, Others), Voltage (Less than 200 V, 200 V to 500 V, More than 500 V), Technology (More Electric, Hybrid Electric, Fully Electric), Application (Power Generation Management, Flight Control & Operation, Cabin System, Configuration Management, Power Distribution, Air Pressurization and Condition), Material (Silicon Carbide (SiC), Gallium Nitride (GaN) and Others), Platforms (Commercial Aviation, Military Aviation, Business & General Aviation), and Region - Global Forecast to 2025
The study involved four major activities in estimating the current market size for the aircraft power electronics market. Exhaustive secondary research was undertaken to collect information on the market, the peer markets, and the parent market. The next step was to validate these findings, assumptions, and sizing with industry experts across the value chain through primary research. Both top-down and bottom-up approaches were employed to estimate the complete market size. Thereafter, market breakdown and data triangulation procedures were used to estimate the market size of segments and subsegments.
- Published: January 2026
- Price: $ 4950
- TOC Available:
-
Coated Abrasive Market by Product Type (Belts, Discs, Rolls, Sheets, Others Product Type), Material Type (Aluminum Oxide, Silicon Carbide, Zirconia Alumina, Ceramic Alumina, Other Material Type), Backing Material (Cloth, Paper, Fiber, Polyester, Other Backing Material), End-use Industry (Construction, Woodworking, Automotive, Aerospace, Metal Working, Other End-Use Industries), and Region - Global Forecast to 2030
The global Coated Abrasive market size is projected to reach USD 20 billion by 2030 from USD 15 billion in 2024 at a CAGR of 6.8% between 2025 and 2030.
- Published: January 2026
- Price: $ 4950
- TOC Available:
-
Silicon Carbide (SiC) Market by SiC Discrete Device (SiC Diode and SiC MOSFET), SiC Module, Voltage Range (Up to 1,200 V, Low (1,200 V to 1,700 V), Medium (1,700 V to 3,300 V), High (More than 3,300 V)), Automotive SiC Device - Global Forecast to 2030
The silicon carbide (SiC) market is expected to grow from USD 3.83 billion in 2025 to USD 12.03 billion by 2030, at a compound annual growth rate (CAGR) of 25.7% during the forecast period. The Key Players STMicroelectronics (Switzerland), Semiconductor Components Industries, LLC (US), Infineon Technologies AG (Germany), Wolfspeed, Inc. (US), and ROHM Co., Ltd. (Japan), Fuji Electric Co., Ltd. (Japan), Toshiba Electronic Devices & Storage Corporation (Japan), Microchip Technology Inc. (US), Mitsubishi Electric Corporation (Japan), and Robert Bosch GmbH (Germany).
- Published: October 2025
- Price: $ 4950
- TOC Available:
-
Wide Bandgap Semiconductors Market By Material ( Silicon Carbide (SiC),Gallium Nitride (GaN),Aluminum Nitride (AlN)), Device Type(Power Devices, Radio Frequency (RF) Devices), Vertical(Automotive, Consumer Electronics, Aerospace, IT & Telecommunications) Region (North America, Europe, Asia Pacific, ROW ) – Global Forecast To 2030
The major players in the global Wide Bandgap Semiconductors Market
- Published: January 2026
- Price: $ 4950
- TOC Available:
-
Low Noise Amplifier (LNA) Market by Frequency (<6 GHz, 6–60 GHz, and >60 GHz), Material (Silicon, Silicon Germanium, Gallium Arsenide), Vertical (Consumer, Telecom, Military, Industrial, Automotive and Medical), and Geography - Global Forecast to 2023
The low noise amplifier (LNA) market is expected to grow from USD 1.17 Billion in 2016 to USD 3.00 Billion by 2023, at a CAGR of 13.8% between 2017 and 2023. The major players of the LNA market are NXP Semiconductors N.V. (Netherlands), Analog Devices, Inc. (US), Infineon Technologies AG (Germany), L3 Narda-MITEQ (US), Qorvo, Inc. (US), Skyworks Solutions, Inc. (US), ON Semiconductor Corp. (US), Panasonic Corp. (Japan), Texas Instruments, Inc. (US), and Teledyne Microwave Solutions (US). The key innovators of the market are Custom MMIC (US), MACOM Technology Solutions Holdings, Inc. (US), SAGE Millimeter, Inc. (US), WanTcom Inc. (US), and DBWave Technologies Co., Ltd. (China).
- Published: July 2017
- Price: $ 4950
- TOC Available:
-
RF Duplexer Market by Material (Silicon, Gallium Arsenide and Silicon-Germanium ), by Component (RF Filter (RX/TX Filters), Surface Acoustic Wave (SAW) Filters, Bulk Acoustic Wave (BAW), Duplexers, Power Amplifiers, Antenna Switches and Demodulators and Others), by Application (Tablets , E-Readers, GPS Devices , Notebooks, Smart TV’s, Cellular Phones), and by Geography - Global Trends & Forecasts 2015 - 2020
According to the Report, One of the Major Drivers of the Market Is the Deployment of Lte Networks. The Evolution of Wireless Standards has Compelled Wireless Communication Device Manufacturers to Develop and Design Multi-Mode and Multi-Band Devices, Which, in Turn, Increase the Demand for Rf Duplexers in Wireless Communication Devices Such As Cellphones, and Tablets.
- Published: January 2026
- Price: $ 4950
- TOC Available:
-
RF Signal Chain Component Market Size, Share & Industry Trends Growth Analysis Report by Product (Filters, RF Amplifiers, Mixers, Power Dividers, Switches, Couplers, Phase Shifters), Frequency Band (Ku, Ka, L, S,C), Material (Gallium Arsenide, Gallium Nitride, Silicon, Silicon Germanium), Application and Region - Global Forecast to 2028
The global RF signal chain components market is expected to grow from USD 38.9 billion in 2022 to USD 80.0 billion by 2028, at a compound annual growth rate (CAGR) of 12.3% during the forecast period.The key players Qorvo, Inc. (US), Murata Manufacturing Co., Ltd. (Japan), Skyworks Solutions, Inc. (US), Broadcom (US), Analog Devices, Inc. (US), NXP Semiconductors (Netherlands), STMicroelectronics (Switzerland), CPI International (US), National Instruments Corp. (US), MACOM (US), Infineon Technologies AG (Germany), Mitsubishi Electric (Japan), Texas Instruments (TI) (US), Cobham Limited (UK), Astra Microwave Products Limited (India), Microchip Technology Inc. (US), MicroWave Technology, Inc. (US), Panasonic Holdings Corporation (Japan), Raytheon Technologies (US), Wolfspeed (US), APITech (US), Sumitomo Electric Industries, Ltd. (Japan), RFHIC Corporation (South Korea), Thales (France), VectraWave (France).
- Published: October 2023
- Price: $ 4950
- TOC Available:
-
Power Electronics Market by Power Discrete (Diode, Transistor, Thyristor), Power Module (FET, IGBT, Intelligent Power Module, Standard and Power Integrated Module), Power IC, Silicon, Silicon Carbide, Gallium Nitride - Global Forecast to 2030
The power electronics market is expected to grow from USD 51.73 billion in 2025 to USD 67.42 billion by 2030, at a compound annual growth rate (CAGR) of 5.4% during the forecast period. The Key Players Infineon Technologies AG (Germany), Texas Instruments Incorporated (US), Semiconductor Components Industries, LLC (US), STMicroelectronics (Switzerland), Analog Devices, Inc. (US), Mitsubishi Electric Corporation (Japan), Renesas Electronics Corporation (Japan), TOSHIBA CORPORATION (Japan), Fuji Electric Co., Ltd. (Japan), and Vishay Intertechnology, Inc. (US).
- Published: July 2025
- Price: $ 4950
- TOC Available:
-
Needle Holders Market by Type (Mayo-Hegar, Olsen-Hegar, Crilewood, Derf, Castroviejo), Application (Surgery, Microsurgery, Dental), Material (Stainless Steel, Tungsten Carbide), Usage Type (Reusable, Single Use), End User, Region - Global Forecast to 2029
The global needle holders market, valued at US$318.9 million in 2022, stood at US$367.3 million in 2024 and is projected to advance at a resilient CAGR of 7.6% from 2023 to 2028, culminating in a forecasted valuation of US$530.3 million by the end of the period. The growth of this market is driven by increased healthcare investments, the expansion of hospitals, a higher volume of surgeries, the rising adoption of microsurgery, and the growing demand for cosmetic, plastic, and reconstructive surgeries.
- Published: September 2024
- Price: $ 4950
- TOC Available:
-
Ceramic Coatings Market by Type (Oxide coatings, Carbide coatings, Nitride coatings, and others), by Technology (Thermal spray, PVD, CVD, and Others), by Application (Transportation & Automotive, Energy, Aerospace & Defense, Industrial goods, Healthcare, and Others) - Global Trends & Forecasts to 2020
Ceramic coatings are generally applied to metal or metallic alloy components or to ceramic components. They can be further classified into oxide coatings, carbide coatings, nitride coatings, and others. These coatings are generally used for wear resistance, and high temperature and corrosion resistant applications. All ceramic coatings deliver high level of performance in each of these three major areas. The global ceramic coatings market is expected to grow at a CAGR of 7.50% from 2015 to 2020 to reach a value of $10.12 Billion by 2020.
- Published: June 2015
- Price: $ 4950
- TOC Available:
Records 41 to 50 of 50
