Here are relevant reports on : blow-molding-market
-
Off-highway Plastics Market by Material Type (Polypropylene, Polyvinyl Chloride, Polyethylene, Polyamide, Acrylonitrile Butadiene Styrene, Polycarbonate, Polyoxymethylene, Thermoplastic Elastomer, Bio-based Plastics), Process Type (Injection Molding, Extrusion, Compression Molding, Blow Molding, Additive Manufacturing/3D Printing, Other Process Types), End User (Construction, Agriculture, Mining, Material Handling), and Region – Global Forecast to 2030
The off-highway plastics market is projected to reach USD 13.08 billion by 2030 from USD 9.44 billion in 2025, at a CAGR of 6.8% during the forecast period. The Key players Bemis Manufacturing Company (US), EVCO Plastics (US), MacLean-Fogg (US), Gemini Group, Inc. (US), Lippert (US), Mack Molding Co. (US), Rochling (Germany), Mitsubishi Chemical Group (Japan), Trelleborg AB (Sweden), and Varroc Group (India).
- Published: February 2026
- Price: $ 4950
- TOC Available:
-
Natural Fiber Composites Market by Type (Flax, Kenaf, Hemp), Resin Type (PP, PE, PA), Manufacturing Process (Compression Molding, Injection Molding), End-Use Industry (Automotive, Building & Construction), and Region - Global Forecast to 2029
The natural fiber composites market is expected to grow from USD 0.35 billion in 2024 to USD 0.46 billion in 2029, at a CAGR of 5.3% during the forecast period. Prominent companies include Polyvlies Franz Beyer GmbH (Germany), TECNARO GMBH (Germany), FlexForm Technologies (US), Meshlin Composites Zrt. (Hungary), GreenGran BN (China), BUSS AG (Switzerland), Green Dot Bioplastics, Inc. (US), NPSP BV (Netherlands), Bcomp (Switzerland), BPREG Composites (Turkey), Weifang Yunding Holding Group Co., Ltd. (China), Holland Composites (Netherlands), MYNUSCo (India), HempFlax Group B.V. (Netherlands), and UPM (Finland), and among others.
- Published: January 2025
- Price: $ 4950
- TOC Available:
-
Epoxy Composite Market by Fiber Type (Glass, Carbon), Manufacturing Process (Lay-up, Compression Molding, Resin Injection, Resin Transfer Molding, Filament Winding, and Pultrusion), End-use Industry, and Region - Global Forecast to 2021
The epoxy composite market was valued at USD 21.60 Billion in 2015, and is projected to reach USD 33.06 Billion by 2021, at a CAGR of 7.34% between 2016 and 2021. The use of epoxy composite is becoming crucial in industries, such as wind energy, aerospace & defense, automotive & transportation, sporting goods, pipe & tank, electrical & electronics, marine, and others, due to its properties, including lightweight, low maintenance, durability, and high tensile strength and flexibility.
- Published: April 2017
- Price: $ 4950
- TOC Available:
-
Polyoxymethylene Market by Type (Homopolymer, Copolymer), Processing Technique (Injection Molding, Extrusion, Compression Molding), Grade, End-use Industry, and Region - Global Forecast To 2030
The polyoxymethylene market is projected to be valued at USD 3.73 billion in 2025 and USD 4.64 billion in 2030, registering a CAGR of 4.51% during the forecast period. The key players include Celanese Corporation (US), Daicel Corporation (Japan), Mitsubishi Gas Chemical Company, Inc. (Japan), BASF (Germany).
- Published: March 2026
- Price: $ 4950
- TOC Available:
-
Glass Filled Nylon Market by Type (Polyamide 6, Polyamide 66),End Use Industry(Automotive, Electrical & Electronics, Industrial), Manufacturing Process(Injection Molding, Extrusion Molding), Glass Filling and Region Global Forecast to 2024
The glass filled nylon market is projected to grow from USD 8.2 billion in 2019 to USD 10.8 billion by 2024, at a CAGR of 5.8% between 2019 and 2024. The market is growing due to the high demand from the automotive, industrial, and electrical & electronics industries.BASF SE (Germany), Asahi Kasei Corporation (Japan), Lanxess (Germany), DowDuPont Inc (US), Royal DSM N.V. (Netherlands), Ensinger GmbH (Germany), Arkema (France), SABIC (Saudi Arabia), Evonik (Germany), and Ascend Performance Materials (US).
- Published: April 2019
- Price: $ 4950
- TOC Available:
-
Automotive Composites Market by Fiber Type (Glass, Carbon), Resin Type (Thermoset, Thermoplastic), Manufacturing Process (Compression Molding, Injection Molding, RTM), Application, Vehicle Type, and Region - Forecast to 2031
The global automotive composites market is estimated to reach USD 19.35 billion by 2031 from USD 10.74 billion in 2026, at a CAGR of 12.5%. Prominent companies include Toray Industries, Inc. (Japan), SGL Carbon (Germany), POLYTEC HOLDING AG, ElringKlinger AG (Germany), Syensqo (Belgium), HENGRUI CORPORATION (HRC) (China), Exel Composites (Finland), Teijin Limited (Japan), Mitsubishi Chemical Group Corporation (Japan), Piran Advanced Composites (UK), IDI Composites International (US), and Röchling SE & Co. KG (Germany).
- Published: July 2026
- Price: $ 4950
- TOC Available:
-
Polyetherimide (PEI) Market by Form (Film, Sheet, Granule, Tube, Rod), Grade (Reinforced, Unreinforced), Process Type (Injection Molding, Extrusion, Thermoforming, Compression Molding), End-use Industry, and Region - Global Forecast to 2024
The market for PEI is projected to grow from USD 522 million in 2019 to USD 714 million by 2024, at a CAGR of 6.5% during the forecast period. PEI is a high-performance polymer with both ether links and imide groups in its polymer chain. It is used in high-temperature applications where fast dissipation of heat is essential. Due to its creep resistance, low smoke emission, and flame resistance, the demand for PEI as a thermally conductive plastic has increased significantly. PEI, along with thermally conductive fillers, is a cost-effective solution to metals due to lesser manufacturing steps and joints. PEI is widely used as an alternative to metals in compact electronic gadgets, as it increases the performance of compact electronics by heat dissipation. In addition to the electronics industry, PEI is used in transportation, medical, consumer good, and industrial end-use industries.PEI market are SABIC (Saudi Arabia), RTP Company (US), Ensinger Plastics (Germany), Röchling Group (Germany), Kuraray Europe (Germany), Mitsubishi Chemical Advanced Materials (Japan), Solvay SA (Belgium), and Toray Industries (Japan).
- Published: June 2019
- Price: $ 4950
- TOC Available:
-
Rail Composites Market by Fiber Type (Glass Fiber, Carbon Fiber), Resin Type (Polyester, Phenolic, Epoxy, Vinyl Ester), Manufacturing Process (Lay-up, Injection Molding, Compression Molding, RTM), Application, & Region - Global Forecast to 2028
The rail composites market is expected to grow from USD 1.7 billion in 2023 to USD 2.4 billion by 2028, at a CAGR of 7.2% during the forecast period. Prominent companies in the rail composites market include Gurit Holdings AG (Switzerland), Hexcel Corporation (US), 3A Composites (Switzerland), Toray Industries, Inc. (Japan), Solvay (Belgium), Teijin Limited (Japan), Premier Composite Technologies (UAE), Dartford Composites Ltd. (UK), Exel Composites (Finland), Avient Corporation (US), Kineco Limited (India), BASF SE (Germany), AVIC Cabin Systems (UK), BFG International (Bahrain), and Reliance Industries Ltd. (India).
- Published: March 2024
- Price: $ 4950
- TOC Available:
-
Blow-fill-seal Technology Market by Material (Polypropylene & Polyethylene), Product (Bottles, Vials, Ampoules), End-use Industry (Pharmaceutical), and Region (North & South America, Europe, Asia Pacific, Middle East & Africa) - Global Forecast to 2023
MarketsandMarkets projects the growth of the blow-fill-seal technology market from USD 292.3 million in 2018 to USD 386.0 million by 2023, at a CAGR of 5.71%. The blow-fill-seal technology market is expected to witness high growth due to factors, such as rise in the middle-class populations, growth in demand from the pharmaceutical and other industries including chemical, food & beverage, and automotive; and preference for hygienic and convenient packaging. The major players include Catalent (US), Recipharm (Sweden), Rommelag (Germany), Unither Pharmaceuticals (France), Pharmapack (Japan), Unipharma (US), Curida (Norway), Weiler Engineering (US), The Ritedose Corporation (US), and Unicep Packaging (US). These companies have adopted strategies, such as acquisitions, expansions, and agreements to meet the increase in demand in emerging markets.
- Published: September 2018
- Price: $ 4950
- TOC Available:
-
Fluoropolymer Processing Aid Market by Polymer Type (PP, PE, PVC), Application (Blow Film & Cast Film, Pipes & Tubes, Wires & Cables, Fibers & Raffia), Form (Neat/Additive and Masterbatch) and Region - Global Forecast to 2029
The fluoropolymer processing aid market is expected to grow from USD 1.53 billion in 2024 to USD 1.75 billion by 2029, at a CAGR of 5.7% during the forecast period. The key players profiled in the report include Arkema (France), 3M Company (US), The Chemours Company (US), Daikin Industries, Ltd. (Japan), Syensqo (Belgium), Adplast (Portugal), SCG Chemicals, Public Company Limited (Thailand), Tosaf Compounds LTD (Israel), Ampacet Corporation (US), and Shanghai Lanpoly Polymer Technology Co., Ltd. (China), Plastiblends India Limited (India), and among others.
- Published: January 2025
- Price: $ 4950
- TOC Available:
Records 11 to 20 of 50
