Here are relevant reports on : breathing-circuit-market
-
Power Distribution Unit Market by Type (Basic, Metered, Switched, Monitored, ATS, Hot Swap, Dual Circuit), Phase (Single & Three), Power Rating (Up to 120 V, 120–240 V, 240–400 V, above 400 V), End User and Region - Global Forecast to 2027
The power distribution unit market is projected to reach USD 5.7 billion by 2027, at a CAGR of 7.9% during the forecast period. Key Players include Schneider Electric (France), Legrand (France), Eaton (Ireland), Cisco Systems (US), ABB (Switzerland), Vertiv (US), nVent (UK), Panduit (US), Aten (Taiwan), Delta Electronics (Taiwan), Hewlett Packard Enterprise (US), Socomec (France)
- Published: May 2022
- Price: $ 4950
- TOC Available:
-
DC Circuit Breaker Market by Voltage (Medium Voltage and High Voltage), Type (Solid-State and Hybrid), Insulation (Vacuum and Gas), End-User (T&D utilities, Power generation, Renewables, and Railways) and Region - Global Forecast to 2024
The DC Circuit Breaker market is projected to reach a size of USD 3.2 billion by 2024 at a CAGR of 6.54%, from an estimated USD 2.3 billion in 2019. This growth can be attributed to the growth in electrical network infrastructure, increasing investments in the transmission & distribution infrastructure, increasing demand for reliable and secure power supply, and increasing investments in renewable power generation.ABB (Switzerland), Siemens (Germany), Eaton (Ireland), Toshiba (Japan), Larsen & Toubro (India), Mitsubishi (Japan), Powell (US), Rockwell Automation (US), Fuji Electric (Japan), CG Power (India), ENTEC Electric & Electronic (South Korea), and BRUSH Group (UK).
- Published: May 2019
- Price: $ 4950
- TOC Available:
-
Circuit Breaker Market By Insulation Type (Vacuum, Air, Gas, Oil), Voltage (Low, Medium, High), Installation (Indoor, Outdoor), End User (T&D Utilities, Industrial, Commercial & Residential, Renewables, Railways, Other End Users), Region - Global Forecast to 2030
The global circuit breaker market is expected to grow from USD 22.70 billion in 2025 to USD 30.32 billion by 2030, at a compound annual growth rate (CAGR) of 6.0% during the forecast period. The Key Players ABB (Switzerland), Schneider Electric (France), Siemens (Germany), Mitsubishi Electric (Japan), Eaton (Ireland), Emerson Electric Co. (US), Fuji Electric Co., Ltd. (Japan), Rockwell Automation (US), LS ELECTRIC Co., Ltd. (South Korea) and TOSHIBA CORPORATION (Japan).
- Published: December 2025
- Price: $ 4950
- TOC Available:
-
Low Voltage DC Circuit Breaker Market by Voltage (Below 60V, 60V-120V, 120V-380V, 380V-1.5kV), Type (Air, Molded Case, Others), Breaking Mechanism (Solid-state, Hybrid, Mechanical), End User, and Region - Global Forecast to 2030
The global low voltage DC circuit breaker market is expected to reach USD 1.80 billion in 2025 and USD 2.52 billion by 2030, exhibiting a CAGR of 7.0% during the forecast period.
- Published: January 2026
- Price: $ 4950
- TOC Available:
-
Motor Protection Market by Device (Overload Relay, Vacuum Contactor, Combination Starter & Motor Protection Circuit Breaker), by Industry (Oil & Gss, Water & Wastewater, Infrastructure, Food & Beverages, Metals & Mining), by Power, and by Region - Global Trends & Forecast to 2020
The global motor protection market size is estimated to be around USD 5.09 Billion in 2015, and is expected to grow at a CAGR of 6.86% during the forecast period. Factors driving the motor protection market include global rise in demand for motors and growing concern towards its safety and growth in HVAC system. Major offshore oil & gas developments and rising expenditures in the water & wastewater industry are the major opportunities of the motor protection market.
- Published: December 2015
- Price: $ 4950
- TOC Available:
-
Nanomaterials for Printing Market by Type (Nanosilver ink, Nanogold ink, Carbon nanotube ink, Copper nanoparticle ink, Copper oxide nanoparticle ink, Iron oxide nanoparticle ink and Other) & Applications (PV, Membrane switches, Displays, Automotive, Sensor, RFID, Printed circuit boards and others), and by Region - Trends & Forecasts to 2019
This study aims at estimating the global market of nanomaterials for printing market for 2013 and to project the expected demand of the same by 2019. This market research study provides a detailed qualitative and quantitative analysis of the global nanomaterials for printing market. It provides a comprehensive review of key market drivers, restraints, opportunities, winning imperatives, challenges, and key issues in the market. The market is segmented and projected for important regions, such as Asia-Pacific, Europe, North America and Rest of the World, which are further segmented for key countries in each region. Asia-Pacific is the largest market for nanomaterials for printing in terms of value contributing more than 60% global market. The demand for nanomaterials is driven in the region is driven by the increased demands from the electronics and energy industry. The nanomaterials for printing market is estimated to witness a CAGR of 22.15% between 2014 and 2019 in terms of value, and is anticipated to generate a global market value of $1,974 million by 2019.
- Published: March 2026
- Price: $ 4950
- TOC Available:
-
Thin Film Material Market By Type (CdTe, CIGS, a-Si, Others), End-User Industry [Photovoltaic Solar Cells, MEMS, Semiconductors and Electrical (Circuit Boards), Optical Coating, Others], and Deposition Processes – Global Trends & Forecast to 2018
The thin film material market is expected to grow at a healthy CAGR over the next five years to reach $10,250 million, by 2018. Europe dominates the thin film material market due to high usage of thin film material in its various end-user industries. Although the European economy has still not recovered from the Euro crisis, it will continue to lead this market, followed by North America and Asia-Pacific.
- Published: March 2014
- Price: $ 4950
- TOC Available:
-
Patterning Material Market by Type (193 NM Immersion Resist, Positive 193 NM Dry Resist, Positive 248 NM Resist, I-Line and G-Line Resist, and Others), by Application (Automotive Sensors, DRAM, Glass Printed Circuit Boards, MEMS & NEMS Devices, and Others) - Regional Forecasts to 2020
Patterning materials or photoresists are light sensitive materials used in the photolithography (device patterning process) processes to form patterned coating on a surface for wafers, usually silicon wafers, used in the electronics & semiconductors. The total market size for patterning materials is projected to reach USD 3,862.44 Million by 2020 from USD 2,750.00 Million in 2014, at a CAGR of 5.85% between 2015 and 2020.
- Published: September 2015
- Price: $ 4950
- TOC Available:
-
Molded Case Circuit Breakers Market by Type (Molded Case and Miniature), Rated Current (0-20a, 21-75a, 76-250a, 251-800a, Above 800a), End-use (T&D, Manufacturing & Process, Infrastructure, Power Generation, Transportation) - Global Forecasts to 2021
The molded case circuit breakers market is expected to grow from an estimated USD 6.92 Billion in 2016 to USD 9.62 Billion by 2021, ata CAGR of 6.82%. In this report, the molded case circuit breakers market has been analyzed with respect to five regions, namely, North America, Europe, Asia-Pacific, the Middle East & Africa, and Latin America. Asia-Pacific is expected to dominate the market, given an increase in the number of construction activities in countries such as India and China.
- Published: January 2017
- Price: $ 4950
- TOC Available:
-
Power System Simulator Market by Module (Load Flow, Short Circuit, Device Coordination Selectivity, Arc Flash), Offering (Hardware, Software, Services), End-User (Power Generation, T&D, O&G, Manufacturing, Metals), and Region - Global Forecast to 2022
The global power system simulator market was valued at USD 785.3 Million in 2016 and is projected to reach USD 1180.6 Million by 2022, growing at a CAGR of 7.14%, from 2017 to 2022. The booming power sector and augmented power generation capacities, rising adoption of IoT and cloud platforms, and reduced overall project time and cost are driving the power system simulator market globally. The power system simulator market has been segmented based on module, offering, end-user, and region. To enable an in-depth understanding of the competitive landscape, the report includes the profiles of some of the top players in the power system simulator market. These include ABB (Switzerland), Schneider Electric (France), Siemens (Germany), GE (US), ETAP (US), MathWorks (US), OPAL-RT (Canada), RTDS Technologies (Canada), and Neplan (Switzerland). The leading players are trying to understand the markets in developing economies and are adopting various strategies to increase their market shares.
- Published: December 2017
- Price: $ 4950
- TOC Available:
Records 31 to 40 of 50
