Here are relevant reports on : conductive-polymers-market
-
Polymer Emulsion Market by Type (Acrylics, Vinyl Acetate Polymers, SB Latex) Application (Paints & Coatings, Adhesives & Sealants, Paper & Paperboard) End Use Industry (Buildings & Construction, Automotive, Textile & Coatings) - Global Forecast to 2025
The global polymer emulsion market size is expected to grow USD 38.1 billion by 2025, at a CAGR of 8.6% during the forecasting period. DIC Corporation (Japan), Dow Chemical Company (US), BASF SE (Germany), Arkema Group (France), Celanese Corporation (US), Trinseo (US), The Lubrizol Corporation (US), Wacker Chemie AG (Germany), Synthomer Plc (UK), and Asahi Kasei Corporation (Japan) are the major players in the polymer emulsion market.
- Published: August 2020
- Price: $ 4950
- TOC Available:
-
Electric Vehicle (Car) Polymers Market by Type (Engineering Plastics (ABS, PA, PC, PPS, Fluoropolymer), Elastomers (Synthetic Rubber, Natural Rubber, Fluoroelastomer)), Component (Powertrain, Exterior, Interior), and Region - Global Forecast to 2024
The electric vehicle (car) polymers market size is projected to grow from the estimated USD 4.1 billion in 2019 to USD 52.5 billion by 2024, at a compound annual growth rate (CAGR) of 67% during the forecast period. Electric vehicle polymers are the polymers that are used in electric cars to reduce their weight without affecting the efficiency of the car. Polymers are the only materials that can replace metals as they have similar properties to those of metals, such as flame retardancy, abrasion resistance, stiffness, toughness, electrical insulation, and heat resistance. Replacing metals with the polymers is a key solution for the electric car manufacturers to reduce the overall weight of the electric cars.BASF (Germany), DowDuPont (US), Covestro (Germany), Celanese (US), SABIC (Saudi Arabia), Solvay (Belgium), LANXESS (Germany), LG Chem (South Korea), Asahi Kasei (Japan), and Evonik Industries (Germany).
- Published: June 2019
- Price: $ 4950
- TOC Available:
-
Microfiltration Membranes Market by Type (Fluorinated Polymers, Cellulosic, Polysulfones, Ceramic), pore size (>=0.1 micron, >=0.4 micron, >=0.8 micron), Filtration Mode (Cross flow, Direct flow), Applications - Global Forecast to 2029
The microfiltration membranes market is expected to grow from USD 1.38 billion in 2024 to USD 2.16 billion by 2029, at a CAGR of 9.3% during the forecast period. The Microfiltration membranes market report comprises key service providers such as Merck KGaA (Germany), Sartorius AG (Germany), Kovalus Separation Solutions (US), Hydranautics (US), Pall Corporation (US), 3M (US), Pentair (UK), Asahi Kasei Corporation (Japan), TORAY INDUSTRIES, INC. (Japan), Veolia (France).
- Published: March 2025
- Price: $ 4950
- TOC Available:
-
Self-Healing Materials Market by Form (Extrinsic, Intrinsic), Material Type (Concrete, Coatings, Polymers, Asphalt, Ceramic, Metals), End-Use Industry (Building & Construction, Transportation, Mobile Devices), and Region - Global Forecast to 2021
The market size for self-healing materials is projected to reach USD 2,447.7 Million by 2021, at a CAGR of 95.0% during the forecast period. The growth of the market can be attributed to the properties of self-healing materials that yield long-term financial benefits compared to traditional materials. Building & construction is one of the major end-use industries for self-healing materials in emerging as well as developed economies.
- Published: March 2017
- Price: $ 4950
- TOC Available:
-
Rapid Prototyping Materials Market by Type (Polymers, Metals, Ceramics), Form (Filament, Powder, Ink), Function (Conceptual, Functional Prototype), End User (Aerospace & Defense, Manufacturing & Construction, Healthcare) - Global Forecast to 2021
The rapid prototyping materials market was valued at USD 217.5 Million in 2015 and is projected to reach USD 903.8 Million by 2021, at a CAGR of 26.8% between 2016 and 2021. Major factors driving the growth of the rapid prototyping materials market include high demand for product modification and development, low cycle time of printing, expected increase in supply capacity with forward integration, and development of application-specific grades.
- Published: August 2016
- Price: $ 4950
- TOC Available:
-
Bio-Implants Market - by Type (Cardiovascular, Spine, Orthopedics, Trauma, Dental), by ROA (Surgical/Injectable), by Origin (Allo/Auto/Xenograft, Synthetic) & Materials (Ceramics, Biomaterial, Alloys, Polymers) - Global Trends &, Forecasts till 2017
Bio-implants can be defined as prostheses used to regularize physiological functions. They are made up of biosynthetic materials like collagen, and tissue-engineered products like artificial skin or tissues. Most bioengineered products like cardiac pacemakers and orthopedic artificial implants are also covered under bio-implants, since they are implanted entirely in the patient’s body.
- Published: September 2012
- Price: $ 4950
- TOC Available:
-
Laser Processing Market (2013 – 2018): By Technology (Co2, ND: YAG, Fiber Laser); Process (Engraving, Marking, Cutting, Drilling); Base Material (Metals, Polymers); Application (Electronics, Machine Part Marking, Medical, Signage) & Geography
Since its advent in 1957, the early adopters of laser (light amplification by simulated emission of radiation) technology were applications such as; ranging, targeting, spectroscopy, and microscopy. The purpose of these applications was either the exploration/measurement of distances or the scientific/laboratory experiments. None of the above mentioned application promoted laser technology on the commercial front. However, with the technological developments, lasers became compact, robust, and versatile. Such developments triggered the industrial and commercial applications such as; micro-machining, modeling, precise sculpting, shaping & sizing objects and materials, and contactless imprinting.
- Published: April 2013
- Price: $ 4950
- TOC Available:
-
Fluid Loss Additives Market by Type (Synthetically Modified Natural (PAC, CMC), Synthetic (Acrylic Sulphonated Polymers), Natural (Starch, Lignin, Bentonite)), Application (Drilling Fluid, Cement Slurry) - Global Forecast to 2024
The fluid loss additives market size is projected to reach USD 376 million by 2024 from USD 315 million in 2019, at a CAGR of 3.6%. Increasing shale gas exploration and crude oil production are the major factors driving the growth of the fluid loss additives market. Technological developments have enabled exploration activities to be carried out for sources other than oil, such as shale gas, coal bed methane, and unconventional resources. These activities require sophisticated technologies such as multistage hydraulic fracturing of horizontal wells. These are carried out with the help of various formulated drilling fluids that help to maintain wellbore stable, pump pressure, avoid friction and corrosion and remove & transport cuttings. The exploration activities are expected to grow further to produce around 6 Mbbl/d (Mbbl/d- One thousand barrels per day) by 2020 from these resources. As the fluid loss additive is one of the most important additives used in the drilling process, the increasing shale gas exploration will drive the growth of the market between 2019 and 2024. Halliburton (US), Schlumberger Limited (US), Newpark Resources Inc. (US), Solvay (Belgium), BASF SE (Germany), and Clariant (Switzerland), Global Drilling Fluid and Chemicals Limited (India), Tytan Organics (India) and Nouryon (US).
- Published: June 2019
- Price: $ 4950
- TOC Available:
-
Electronic Chemicals CDMO & CRO Market by Type (High Performance Polymers, Acid & Base Chemicals, Gases, Metals & Pastes), Scale, Application (Photoresist, Etchants, Dopants, Cleaning, Deposition), End-Use & Region-Global Forecast to 2029
The electronic chemicals CDMO & CRO market is expected to grow from USD 0.48 billion in 2024 to USD 0.66 billion by 2029, at a CAGR of 6.8% during the forecast period. The Electronic Chemicals CDMO & CRO Market report comprises key service providers such as Sajjan India Ltd. (India), Cohance Lifesciences (India), noctiluca (Poland), Actylis (US), AGC Inc. (Japan), Navin Fluorine International limited (India), CABB Group GmbH (Germany), Adesis Inc. (US), Inventys Research Company (India), LinkChem Technology Co.,Ltd.(China), among others.
- Published: December 2024
- Price: $ 4950
- TOC Available:
-
Seed Coating Market by Additive Type (Polymers, Colorants, Binders, Minerals/Pumice, Active Ingredients), Crop Type, Process (Film Coating, Pelleting, Encrusting), Coating Type (Bio-based, Synthetic), Form, and Region - Global Forecast to 2030
The seed coating market is projected to reach USD 3.52 billion by 2030, at a CAGR of 8.2% during the forecast period. The report profiles key players such as BASF SE (Germany), Syensqo (Belgium), Clariant (Switzerland), Croda International plc (UK), Sensient Technologies Corporation (US), Germains Seed Technology (UK), Milliken (US), Covestro AG (Germany), BrettYoung (Canada), Chromatech Incorporated (US), Centor Group (Netherlands), Michelman, Inc. (US), Precision Labs (US), CR Minerals, LLC (US), and Universal Coating Systems (US).
- Published: April 2025
- Price: $ 4950
- TOC Available:
Records 31 to 40 of 50
