Here are relevant reports on : plastic-injection-molding-market
-
Nerve Gas Auto Injector Market by Types (Atropin Kit, Atropin Injection, Diazempam Injection, Morphine Injection, Pralidoxime Injection), by End User (Military, Homeland Security), by Geography - Forecast & Analysis To 2014 - 2020
Nerve gas auto injector is important self-aid equipment which helps the soldiers to protect themselves from the effects of the chemical agents during the wars. These auto-injectors have imposed the injectable drug delivery technology which is a combination of two major segments; devices and formulation. The formulations used in these injectors are specifically administered for the prevention from the severe effects of the poisoning nerve agent “organosphosphorous”.
- Published: January 2026
- Price: $ 4950
- TOC Available:
-
Two Wheeler Fuel Injection Systems Market by Technology (Carbureted Fuel Injection System, Electronic Fuel Injection System), by Engine Size, by Component and by Geography - Global Forecast and Analysis to 2019
Global two wheeler fuel injection systems market includes a wide range of components such as Fuel injection (FI) system which includes Fuel injectors, Electronic control unit (ECU) & Fuel pump/Rail and carburetors which includes Off-idle circuit, open throttle circuit, choke, power valve, & accelerator pump. Global two-wheeler fuel injection systems market: The market value of two-wheeler fuel injection systems is projected to grow at a CAGR of 6.76% to reach $ 8.6 Billion by 2019. The global two-wheeler fuel injection systems market is dominated by various players including Robert Bosch GmbH (Germany), Magneti Marelli S.p.A. (Italy), Ucal Fuel systems Ltd. (India), Delphi Automotive PLC (U.K.), Keihien Corporation (Japan), and Mikuni Corporation (Japan).
- Published: January 2015
- Price: $ 4950
- TOC Available:
-
Injector Nozzle Market by Vehicle Type (Passenger Cars, LCVS, HCVS), Technology (Gasoline Port Fuel Injection, Diesel Direct Injection, Gasoline Direct Injection), by Fuel Type (Diesel, Gasoline), and Geography - Global Forecast to 2020
The global injector nozzle market is projected to grow from USD 3.95 Billion in 2015 to USD 5.33 Billion by 2020, at a CAGR of 6.2% from 2015 to 2020. Increasing need to conserve conventional fuel, rising demand of fuel-efficient vehicles, and significant growth in the passenger cars segment are factors driving the growth of the injector nozzle market. In this report, the global injector nozzle market is segmented by fuel type into gasoline and diesel; by vehicle type into passenger cars, light commercial vehicles (LCVs), and heavy commercial vehicles (HCVs); by technology into gasoline port fuel injection, gasoline direct injection, and diesel direct injection; and by region into Europe, North America, Asia-Oceania, and rest of the world. In this report, 2014 is considered as the base year, 2015 as the estimated year, and 2015 to 2020 as the forecast period.
- Published: February 2016
- Price: $ 4950
- TOC Available:
-
Plastic Caps and Closures Market by Product Type (Screw-on Caps, Dispensing Caps), Technology (Injection Molding, Compression Molding, Post-mold TE Band), Raw Material (PP, HDPE, LDPE), End-use (Beverage, Pharmaceutical), Region - Global Forecast to 2025
The global plastic caps and closures market size is projected to reach USD 57.0 billion by 2025, at a CAGR of 5.2% during the forecasting period. Major players operating in the global plastic caps & closures market include Berry Group (US), Crown Holding (US), AptarGroup (US), Amcor (Australia), Coral Products (UK), BERICAP (Germany), Silgan Holdings (US), O.Berk Company, LLC (US), Guala Closures (Italy), United Caps (Luxembourg), Caps & Closures Pty Ltd. (Australia), Caprite Australia Pty Ltd. (Australia), Pano Cap (Canada) Limited (Canada), Plastic Closures Ltd. (UK), Cap & Seal Pvt. Ltd. (India), Phoenix Closures (US), Alupac India (India), Hicap Closures (China), MJS Packaging (US), J.L. Clark (US), TriMas (US), and Comar, LLC (US).
- Published: October 2020
- Price: $ 4950
- TOC Available:
-
Industrial Gases for Plastic & Rubber Industry Market by Gas Type (Nitrogen, Carbon Monoxide, Carbon Dioxide, Others), Process (Injection Molding, Extrusion, Foaming, Blow Molding), Storage & Distribution and Transportation, End Use - Global Forecast to 2020
The global industrial gases for the plastic & rubber industry was valued at USD 4.89 Billion in 2015 to USD 6.31 Billion by 2020, and is projected to grow at a CAGR of 5.24% from 2015 to 2020. The increasing demand in various applications in the food & beverage, healthcare, construction, automobiles, electrical & electronics, and manufacturing sectors is the major factor driving the growth of the industrial gases for the plastic & rubber industry. Additionally, with rapid urbanization, growth in infrastructural activities, and increasing industrialization across the globe, there is a rapidly increasing need for industrial gases for the plastic & rubber industry. Plastic is the fastest-growing segment in this market.
- Published: January 2016
- Price: $ 4950
- TOC Available:
-
Desuperheater Market, By Type (Indirect Contact, Direct Contact, Water Spray, Axial Injection Spray, and Multiple Nozzle Axial Injection Spray), Industry (Chemicals, Food & Beverage and Oil & Gas), Region – Global Forecast 2024 to 2030
The Key Players Spirax-Sarco Engineering (UK), Emerson Electric Co. (US), CIRCOR International, Inc. (US), Graham Corporation (US), Kiekens-DSH BV (Netherlands), Komax (Switzerland), IMI Critical Engineering (US), Pick Heaters Inc. ( US), Schubert & Salzer Inc. (US), and Schutte & Koerting (US).
- Published: January 2026
- Price: $ 4950
- TOC Available:
-
CF & CFRP Market by Precursor Type (PAN, Pitch), Source, Resin Type, Manufacturing Process (Lay-Up, Compression Molding, Resin Transfer Molding, Filament Winding, Injection Molding, Pultrusion), End-use Industry, and Region - Forecast to 2030
The global CF & CFRP market is expected to reach USD 35.55 billion in 2030 from USD 22.48 billion in 2025, at a CAGR of 9.6% from 2025 to 2030. The key players include Toray Industries, Inc. (Japan), Teijin Limited (Japan), Mitsubishi Chemical Corporation (Japan), Hexcel Corporation (US), Syensqo (Belgium), SGL Carbon (Germany), HS Hyosung Advanced Materials (South Korea), Zhongfu Shenying Carbon Fiber Co., Ltd. (China), Kureha Corporation (Japan), DowAksa (Turkey), Weihai Guangwei Composite Materials Co., Ltd. (China), UMATEX (Russia), Jilin Chemical Fiber Group Co., Ltd. (China), Jiangsu Hengshen Co., Ltd. (China), and China National Bluestar (Group) Co., Ltd. (China).
- Published: July 2025
- Price: $ 4950
- TOC Available:
-
Blow Molding Market - By Type, Application & Geography - 2018
- Published: January 2026
- Price: $ 4950
- TOC Available:
-
Vertical Injection Molding Machine Market by Machine Type (Hydraulic, All-Electric and Hybrid), Clamping Force (0-100 Tons, 101-200 Tons, 201-500 Tons and Above 500 Tons), Material (Plastic, Rubber, Metal), Application (Automotive, Medical & Healthcare, Consumer Goods), Automation and Region - Global Forecast to 2030
The vertical injection molding machine market is projected to reach USD 2.37 billion by 2030, at a CAGR of 4.3% from USD 1.69 billion in 2022. One of the major factors contributing to the growth of the vertical injection molding machine market is its specific utilization for insert molding and over molding applications. Also, the demand for high-precision molds is also driving the market.
- Published: January 2026
- Price: $ 4950
- TOC Available:
-
Injection Molding Machine Market by Machine Type (Hydraulic, All-electric, and Hybrid), Clamping Force (0-200, 201-500 and Above 500), Product Type (Plastic, Rubber, Metals), End-Use Industry (Automotive, Packaging) and Region - Global Forecast to 2027
The injection molding machine market size is projected to reach USD 12.3 billion by 2025, at a CAGR of 3.6% during the projected period. The key market players profiled in the report include Haitian International Holdings Limited (China), Chen Hsong Holdings Limited (China), Sumitomo Heavy Industries Ltd. (Japan), Engel Austria GmbH (Austria), Hillenbrand, Inc. (US), and others. They are continuously undertaking developmental strategies such as expansions, new product launches, acquisitions, and contracts & agreements to strengthen their position in the injection molding machine market.
- Published: October 2022
- Price: $ 4950
- TOC Available:
Records 31 to 40 of 50
