Here are relevant reports on : rc-car-market
-
Automotive Glazing Market by Application (Sidelite, Backlite, Sunroof, Lighting, Rear Quarter Glass), Vehicle Type (Passenger Car, Light and Heavy Commercial, Off-Highway, Electric), and Region - Global Forecast to 2025
The global automotive glazing market is expected to be worth USD 1.7 billion by 2025, at a CAGR of 9.9%, by value, during the forecast period. Some of the key players in the automotive glazing market are SABIC (Suadi Arabia), Covestro AG (Germany), Teijin (Japan), Webasto SE (Germany), Trinseo (US), Mitsubishi (Japan), Chi Mei Corporation (Taiwan), Freeglass (Germany), KRD Sicherheitstechnik (Germany), and Idemitsu (Japan). SABIC and Covestro adopted the strategies of expansion, and new product development, to retain its leading position in the automotive glazing market.
- Published: August 2020
- Price: $ 4950
- TOC Available:
-
Automotive Engine Management System Market by Vehicle Type (Passenger Car, LCV, & HCV), Engine Type (Gasoline & Diesel), Components (ECU, Sensors- Temperature, Position, Oxygen, & Knock), Communication Bus & Region - Industry Trends & Forecast to 2025
The Automotive Engine Management System Market is expected to grow from USD 58.8 billion in 2020 to USD 63.2 billion by 2025, at a CAGR of 1.5% during the forecast period. The engine management system market is dominated by global players and comprises several regional players as well. The key players in the engine management system market are Robert Bosch (Germany), Continental AG (Germany), Denso (Japan), BorgWarner (US), Hitachi Automotive (Japan), Infineon Technologies (Germany), Hella (Germany), Sanken (Japan), NGK spark plug (Japan).
- Published: February 2021
- Price: $ 4950
- TOC Available:
-
Electric Vehicle (Car) Polymers Market by Type (Engineering Plastics (ABS, PA, PC, PPS, Fluoropolymer), Elastomers (Synthetic Rubber, Natural Rubber, Fluoroelastomer)), Component (Powertrain, Exterior, Interior), and Region - Global Forecast to 2024
The electric vehicle (car) polymers market size is projected to grow from the estimated USD 4.1 billion in 2019 to USD 52.5 billion by 2024, at a compound annual growth rate (CAGR) of 67% during the forecast period. Electric vehicle polymers are the polymers that are used in electric cars to reduce their weight without affecting the efficiency of the car. Polymers are the only materials that can replace metals as they have similar properties to those of metals, such as flame retardancy, abrasion resistance, stiffness, toughness, electrical insulation, and heat resistance. Replacing metals with the polymers is a key solution for the electric car manufacturers to reduce the overall weight of the electric cars.BASF (Germany), DowDuPont (US), Covestro (Germany), Celanese (US), SABIC (Saudi Arabia), Solvay (Belgium), LANXESS (Germany), LG Chem (South Korea), Asahi Kasei (Japan), and Evonik Industries (Germany).
- Published: June 2019
- Price: $ 4950
- TOC Available:
-
Car Care Products Market by Product Type (Cleaning & Washing, Polishing & Waxing, Sealing Glaze & Coating), Application (Interior, Exterior), Consumption, Solvent (Water, Foam-based), Vehicle Type, Distribution Channel & Region - Global Forecast to 2027
The global car care products market is projected to reach USD 4.8 billion in 2027, at a CAGR of 1.9% during the forecast period. Tetrosyl (UK), Illinois Tool Works (US), 3M (US), Sonax Gmbh (Germany), and Wurth Group (Germany) are the major companies operating in the global car care products market. These companies adopted new product development, and expansion strategies to gain traction in the ride sharing market.
- Published: December 2022
- Price: $ 4950
- TOC Available:
-
Automotive Bushing Market by Application (Engine, Suspension, Chassis, Interior, Exhaust, Transmission), Vehicle Type (Passenger Car, Light Commercial Vehicle, Heavy Commercial Vehicle), EV Type, and Region - Global Forecast to 2025
The global automotive bushing market is projected to grow from an estimated USD 132.20 billion in 2018 to USD 175.31 billion by 2025, at a CAGR of 4.11% from 2018 to 2025. The market is anticipated to grow due to several factors such as the growing vehicle production, shifting focus toward lightweight vehicles, and increasing demand for electric vehicles in the market.Federal-Mogul (US), Oiles Corporation (Japan), Freudenberg Group (Germany), Cooper Standard Holdings Inc. (US), ZF Friedrichshafen AG (Germany), Tenneco Inc. (US), Continental AG (Germany), CRRC Corporation Limited (China), and Benara Udyog Limited (India).
- Published: November 2018
- Price: $ 4950
- TOC Available:
-
Passenger Car Sensors Market by Application (Powertrain/Drivetrain, Exhaust, Interior/Comfort, DAS, & Body Control), by Sensor Type (Pressure, Temperature, Speed, O2/NOx, Position, & Others) & by Geography - Trends & Forecast to 2019
The use of sensors in automotive industry has rapidly increased in the last few decades. The first sensors made for a car were to manage the engine. By 1960’s, it became a widespread practice in passenger cars. The introduction of federal emission norms gave a boost to this market making it quintessential for the Original Equipment Manufacturers (OEMs) to strike a balance between government regulations, manufacturability, and robustness. This required the systems to be equipped with new and precise sensors, such as the Manifold Absolute Pressure (MAP), air fuel ratio sensors, and others. Since then, the sensors used in automobiles have evolved and have catapulted the complexity of vehicle electronics to new heights. Precise measurements and quick data analysis has paved the way for technologies which have helped automotive OEMs cope with the increased pressure from the governments. For Example, the number of sensors used in engine control application has increased from 10 in 1995 to more than 60 in 2013.
- Published: July 2014
- Price: $ 4950
- TOC Available:
-
Car Door Latch Market by Application (Side Door Latch, Hood Latch, Tailgate Latch, and Back Seat Latch), Lock Type (Electronic and Non-Electronic), Vehicle Type (Passenger Car and Light Commercial Vehicle) and Region - Global Forecast to 2021
The car door latch market is projected to grow at a CAGR of 5.80%, from USD 4.97 Billion in 2016 to USD 6.59 Billion by 2021. Global automobile demand is increasing continuously due to reasons such as increase in population, developments in suburbs, and infrastructural expansions, which are major driving factors for the car door latch market. As increase in global automobile demand will directly impact the production of car door latches.
- Published: February 2017
- Price: $ 4950
- TOC Available:
-
Solid-State Car Battery Market by Vehicle (Passenger Car and Commercial Vehicle), Battery Energy Density (>450 Wh/kg, >450 Wh/kg), Propulsion (BEV, PHEV), Component(Cathode, Anode, and Electrolyte), and Region - Global Forecast to 2030
The Solid-State Car Battery Market is expected to grow from 27,070 units in 2025 to 661,724 units by 2030, at a CAGR of 89.5% during the forecast period. The global solid-state car battery market is dominated by global players such as Toyota Motor Corporation (Japan), Solid Power (US), QuantumScape (US), Samsung SDI (South Korea), and LG Chem (South Korea). These companies have been developing new products, adopted expansion strategies, and undertaken collaborations, partnerships, and mergers & acquisitions to gain traction in the high-growth market.
- Published: July 2021
- Price: $ 4950
- TOC Available:
-
Automotive Axle & Propeller Shaft Market by Axle Type (Live, Dead & Tandem), Axle Position (Front & Rear), Propeller Shaft Type (Single & Multi-Piece), Passenger Car Propeller Shaft Material (Alloy & Carbon Fiber) and Region - Global Forecast to 2025
The Automotive Axle & Propeller Shaft Market is expected to grow from USD 21.7 billion in 2020 to USD 25.4 billion by 2025, at a CAGR of 3.2% during the forecast period. The automotive axle and propeller shaft market is dominated by a few global players and comprises several regional players. Some of the key players in the automotive axle and propeller shaft market are ZF Friedrichshafen AG (Germany), American Axle & Manufacturing Holdings, Inc. (US), Dana Incorporated (US), GKN PLC (UK), Showa Corporation (Japan), JTEKT Corporation (Japan), Hyundai Wia Corporation (South Korea), IFA Rotorion Holding GmbH (Germany), and Gestamp Automocion (Spain). The key strategy adopted by the leading players to gain traction in the market was new product innovation and development. For instance, In Feb 2020, Gestamp has developed lightweight chassis that meet safety norms and supply to upcoming vehicle models of Skoda and Volkswagen from 2021 in India. Gestamp is expected to supply the subframe and front control arm for both German OEM vehicle models
- Published: July 2020
- Price: $ 4950
- TOC Available:
-
Automotive Airbag Silicone Market by Airbag Position (Front, Knee, Curtain/Side), Airbag Type (Cut-&-Sew Seam Sealed & One-piece-woven), ICE & Electric Vehicle (Passenger Car, LCV, HCV, BEV & PHEV/FCEV), Autonomy Level and Region - Global Forecast to 2025
The Automotive Airbag Silicone Market is expected to grow from USD 239 million in 2020 to USD 534 million by 2025, at a CAGR of 17.5% during the forecast period. Dow (US), Elkem Silicones (France), Shin-Etsu Chemical Co., Ltd. (Japan), Wacker Chemie AG (Germany), and Momentive (US) are the major companies operating in the global automotive airbag silicone market. These companies adopted expansion strategies and used mergers & acquisitions to gain traction in the automotive airbag silicone market.
- Published: November 2020
- Price: $ 4950
- TOC Available:
Records 31 to 40 of 50
