Here are relevant reports on : interior-door-market
-
Passenger Car Sensors Market by Application (Powertrain/Drivetrain, Exhaust, Interior/Comfort, DAS, & Body Control), by Sensor Type (Pressure, Temperature, Speed, O2/NOx, Position, & Others) & by Geography - Trends & Forecast to 2019
The use of sensors in automotive industry has rapidly increased in the last few decades. The first sensors made for a car were to manage the engine. By 1960’s, it became a widespread practice in passenger cars. The introduction of federal emission norms gave a boost to this market making it quintessential for the Original Equipment Manufacturers (OEMs) to strike a balance between government regulations, manufacturability, and robustness. This required the systems to be equipped with new and precise sensors, such as the Manifold Absolute Pressure (MAP), air fuel ratio sensors, and others. Since then, the sensors used in automobiles have evolved and have catapulted the complexity of vehicle electronics to new heights. Precise measurements and quick data analysis has paved the way for technologies which have helped automotive OEMs cope with the increased pressure from the governments. For Example, the number of sensors used in engine control application has increased from 10 in 1995 to more than 60 in 2013.
- Published: July 2014
- Price: $ 4950
- TOC Available:
-
Automotive E-tailing Market by Applications, Vehicle Type, Vendor, Components (Infotainment, Interior Accessories, Engine Components, Tires, and Electrical Products), Product Label, Technology, and Region - Global Forecast to 2021
The E-tailing market for automotive applications is projected to grow at a CAGR of 12.53% during the forecast period, to reach USD 49.07 Billion by 2021 from an estimated USD 27.19 Billion in 2016. The base year for the report is 2015 and the forecast year is 2021. The current vehicle population, increasing automobile sales, and increasing penetration of internet has led to the increase in online sales of automotive components. The major market players in the E-tailing market for automotive applications are Advance Auto Parts (U.S.A.), Alibaba Group Holding Limited (China), Amazon.com Inc. (U.S.A.), Delticom AG (Germany), O’Reilly Auto Parts (U.S.A.), Flipkart (India) and eBay Inc. (U.S.A.) etc. which have their presence in not only the domestic but in the international market as well.
- Published: December 2016
- Price: $ 4950
- TOC Available:
-
Aircraft Cabin Interiors Market by Type (Seating, IFEC, Cabin Lighting, Galleys, Lavatories, Windows & Windshields, Interior Panels), End User (OEM, MRO, Aftermarket), Platform, Material and Region - Global Forecast to 2031
The global aircraft cabin interiors market is expected to reach USD 29.22 billion in 2026 and USD 38.00 billion by 2031, at a CAGR of 5.39% from 2026 to 2031. The report profiles key players such as Safran, RTX, Diehl Stiftung & Co. KG, Panasonic Corporation of North America, and Honeywell International, Inc.
- Published: July 2026
- Price: $ 4950
- TOC Available:
-
Automotive Bushing Market by Application (Engine, Suspension, Chassis, Interior, Exhaust, Transmission), Vehicle Type (Passenger Car, Light Commercial Vehicle, Heavy Commercial Vehicle), EV Type, and Region - Global Forecast to 2025
The global automotive bushing market is projected to grow from an estimated USD 132.20 billion in 2018 to USD 175.31 billion by 2025, at a CAGR of 4.11% from 2018 to 2025. The market is anticipated to grow due to several factors such as the growing vehicle production, shifting focus toward lightweight vehicles, and increasing demand for electric vehicles in the market.Federal-Mogul (US), Oiles Corporation (Japan), Freudenberg Group (Germany), Cooper Standard Holdings Inc. (US), ZF Friedrichshafen AG (Germany), Tenneco Inc. (US), Continental AG (Germany), CRRC Corporation Limited (China), and Benara Udyog Limited (India).
- Published: November 2018
- Price: $ 4950
- TOC Available:
-
Automotive Plasticizers Market by Type (Phthalates, Non-phthalates), Application (Interior Components, Exterior Components), End User (OEM, Aftermarket), and Region – Global Forecast to 2030
The automotive plasticizers market is projected to reach USD 3.75 billion by 2030 from USD 2.80 billion in 2025, at a CAGR of 6.0% during the forecast period. The Key Players BASF (Germany), ExxonMobil Chemical Company (US), Evonik Industries AG (Germany), Eastman Chemical Company (US), and LG Chem (South Korea).
- Published: October 2026
- Price: $ 4950
- TOC Available:
-
Automotive Interior Market by Component (HUD, Door Panel, Dome Module, Seat, Headliner, Center Console, Center Stack), Material Type, Level of Autonomy, Electric Vehicle, Passenger Car Class, ICE Vehicle Type, and Region - Global Forecast to 2033
The global automotive interior market is estimated at USD 186.80 billion in 2026 and is projected to reach USD 217.11 billion by 2033, at a CAGR of 2.2% over the same period. The key players include FORVIA Faurecia (France), Adient plc. (Ireland), Robert Bosch GmbH (Germany), Lear Corporation (US), and Antolin (Spain).
- Published: June 2026
- Price: $ 4950
- TOC Available:
-
Car Door Latch Market by Application (Side Door Latch, Hood Latch, Tailgate Latch, and Back Seat Latch), Lock Type (Electronic and Non-Electronic), Vehicle Type (Passenger Car and Light Commercial Vehicle) and Region - Global Forecast to 2021
The car door latch market is projected to grow at a CAGR of 5.80%, from USD 4.97 Billion in 2016 to USD 6.59 Billion by 2021. Global automobile demand is increasing continuously due to reasons such as increase in population, developments in suburbs, and infrastructural expansions, which are major driving factors for the car door latch market. As increase in global automobile demand will directly impact the production of car door latches.
- Published: February 2017
- Price: $ 4950
- TOC Available:
-
Automotive Closure Market for EV & ICE by Application (Power- Window, Sunroof, Tailgate, Convertible Roof, Sliding Door, and Side Door), Component (Switch, ECU, Latch, Motor/Actuator, Relay), Type (Manual and Powered), and Region - Global Forecast to 2022
The automotive closure market is primarily driven by the rising consumer demand for comfort and luxury features in vehicles. Also, the market is influenced by the increasing concern towards safety/hands-free operations over manual operations. The increasing demand for premium cars across the globe is increasing the number of advanced electronics systems in vehicles. The automotive closure market size is valued at USD 16.42 Billion in 2016 and is projected to grow at a CAGR of 7.75% during the forecast period. The base year considered for the study is 2016 and the forecast period is from 2017 to 2022. The key automotive closure manufacturers profiled in the report include Continental AG (Germany), Magna International Inc. (Canada), Robert Bosch GmbH (Germany), and Aisin Seiki. Co. Ltd (Japan). These systems and technologies are supplied to automotive OEMs such as Volkswagen AG (Germany), General Motors (U.S.), Toyota Motor Corporation (Japan), and others.
- Published: September 2017
- Price: $ 4950
- TOC Available:
-
Automotive Bearing Market by Bearing Type (Ball Bearing, Roller Bearing, and Other Bearings), Application (Wheel Hub, Transmission, Drivetrain, Engine, and Interior & Exterior), Vehicle Type (Passenger Cars, LCVs, and HCVs), EV Type, Aftermarket (Wheel Hub, Transmission, Drivetrain, Engine, and Interior & Exterior) and Region - Global Forecast to 2032
The global automotive bearing market for EVs is projected to rise from USD 5.81 billion in 2025 to USD 12.82 billion by 2032, at a CAGR of 11.97%. The automotive bearing market is dominated by established players such as NSK Ltd. (Japan), NTN Corporation (Germany), The Timken Company (USA), JTEKT Corporation (Japan), and Nachi Fujikoshi (Japan). These players manufacture and supply automotive bearings for electric vehicles and ADAS, setting up R&D facilities and offering best-in-class products to their customers.
- Published: August 2025
- Price: $ 4950
- TOC Available:
-
One Component Polyurethane Foam Market by Raw Material (MDI, Polyether Polyols, Polyester Polyols, Others), Application, End-Use (Door & Window Frame Jambs, Ceiling & Floor Joints, Partition Walls, Water Pipes), Region - Global Forecast to 2025
The one-component polyurethane foam market is projected to reach USD 3.3 billion by 2025, registering a CAGR of 6.0% during the forecasting period. Soudal Group (Belgium), Henkel AG & Co. (Germany), Hanno-Werk GmbH & Co. KG (Germany), Selena Group (Poland), Tremco illbruck Group (Germany), GNS Group (China), Profflex Mounting Foams (Russia), Den Braven Sealants (Netherlands), Aerosol – service a.s (Czech Republic), DAP Products, Inc. (US), McCoy Soudal Sealants Adhesives & Foams Private Limited (India), Akkim Construction Chemicals (Turkey), TKK d.o.o. (Slovenia), Krimelte OÜ (Estonia), DuPont (US) ,Gorcci International Limited (China), Kater Adhesive Industrial Co. (China), Fomo Products, Inc. (US), Polyurethane Ltd. (Israel), Larsen Building Products (Ireland), and Castelein Sealants (Belgium) are some of the key players in the one component polyurethane foam market.
- Published: November 2020
- Price: $ 4950
- TOC Available:
Records 41 to 50 of 50
